• KSBB Journal
• /
• v.8 no.3
• /
• pp.287-294
• /
• 1993

For the purpose of combining the purification processes for several biologically active proteins form human urine, an efficient integrated fractionation procedure has been investigated. The procedure was started by concentration with ultrafiltration and pH precipitation followed by a selectable combination of chromatography on gel filtration, adsorption, ion exchanger, affinity, and reverse phase column. By this process, the purified urokinase, epidermal growth factor and albumin migrated as a single band on SDS-polyacrylamide gel electrophoresis and were fully active. The recoveries of these purified proteins were 48%, 17%, and 46%, respectively.

• Food Engineering Progress
• /
• v.21 no.2
• /
• pp.150-157
• /
• 2017

The objective of this study was to determine the effect of moisture contents (40, 50, 60%) and $CO_2$ gas injection (0 and 800 mL/min) on physicochemical properties of extruded soy protein isolate (SPI). The expansion ratio and the specific length increased, but piece density decreased with the increase in $CO_2$ gas injection from 0 to 800 mL/min at both 40 and 50% moisture contents. On the contrary, the expansion ratio and the specific length decreased, but piece density increased with the increase in $CO_2$ gas injection from 0 to 800 mL/min at 60% moisture content. Extruded SPI with $CO_2$ gas injection at 800 mL/min had small cell size and higher amount of cell than extruded SPI without $CO_2$ gas injection. The water holding capacity and nitrogen solubility index increased, and the integrity index and the texture decreased with the increase in $CO_2$ gas injection from 0 to 800 mL/min. In conclusion, extruded SPI with the $CO_2$ gas injection at 800 mL/min showed better expansion properties and cell formation than extruded SPI without the $CO_2$ gas injection.

• Journal of the Korean Chemical Society
• /
• v.50 no.3
• /
• pp.216-223
• /
• 2006

To increase the stability of liposomes in blood circulation, surface modification of liposomes by incorporating a lipid-polymer derivative in the lipid bilayer or conjugating a hydrophilic polymer to the liposomal surface has been developed. In this study, the comblike copolymer, poly(HEMA-co-HPOEM), having multiple polyethyleneoxide side chains was prepared by free radical polymerization of hydroxyethylmethacrylate (HEMA) and hydroxypolyoxyethylenemethacrylate (HPOEM) as vinyl monomers. Poly(HEMA-co-HPOEM) was conjugated to the liposomal surface and the characteristics of the modified liposomes in serum were investigated. Conjugation of poly(HEMA-co-HPOEM) to liposomes increased the particle size of the liposomes by 30 nm and decreased the absolute value of zeta potential of the liposomes by shielding the negative charge of liposomal surface. Loading efficiency of model drug, doxorubicin, in liposomes was about 90% and the efficiency was not affected by conjugation of poly(HEMA-co-HPOEM) to liposomes. The particle size of poly(HEMA-co-HPOEM)-conjugated liposomes in serum did not changed and the protein adsorption was lower than that of control liposomes or liposomes containing polyethyleneoxide-lipid derivative (PEG-liposomes). These results suggest that poly(HEMA-co-HPOEM) is efficient for the stabilization of liposomes in blood circulation.

• Microbiology and Biotechnology Letters
• /
• v.17 no.2
• /
• pp.94-99
• /
• 1989

Seven gtrains of Lactobacillus produce bacteriocin being active for Lacidophilus. All strains producing bacteriocin were found to be L. acidophilus except with one strain of L. gasseri. The maximum activity of bacteriocin produced by Lactobacillus strains was obtained at a middle or late stage of the log phase, or a early stage of the stationary phase. After the maximum was reached, however, the activity was rapidly decreased. The bacteriocins were inactivated easily by the treatment with proteolytic enzymes but not with nucleolytic enzymes, suggesting that the bacteriocin was proteinaceous. The bacteriocins were different from the other previously reported lactobacillus bacteriocin in their flexibility to the treatment at 10$0^{\circ}C$. Bacteriocins of L. acidophilus ATCC 9857 and 4357 decreased in activity by the treatment with diethylether, presumably the bacteriocin contained of a lipid component. It sums likely that L. acidophilus A4 bacteriocin adsorb to a regularly arrayed layer of the cell wall.

• Applied Chemistry for Engineering
• /
• v.16 no.6
• /
• pp.725-730
• /
• 2005

In the development of biomaterials as a substitute of hard tissues, the biocompatibility and osteoconductivity of the biomaterial are considered to be one of the most significant considerations. These biological properties of a material can be greatly improved by the modification of the surface properties by the depositing calcium phosphate thin films on the material since calcium phosphate films possess similar chemical compositions to hard tissues. The success of a material as a biomaterial will be determined by the interaction of the surface of the material with the adhesion molecules which induce cellular adhesion and biological responses of the adherent cells. Depending on the adsorption mechanisms and adsorbed conformation of the adhesion molecules on the surface of the biomaterial, cellular responses, such as adhesion, proliferation and differentiation of osteoblast cells, can be promoted or restricted. It has been reported that materials of which surfaces were modified with thin films of calcium phosphate appeared to be more osteoconductive. Rapid formations of bone nodule in addition to higher differentiations of osteoblast have been observed on the calcium phosphate thin films.

• The Korean Journal of Mycology
• /
• v.16 no.3
• /
• pp.175-184
• /
• 1988

In order to make the koji in which kojic mycelium penetrate deeply, some koji making conditions were investigated, thereafter kojies were maked on a large scale, and kojic enzymes in moromi were in vestigated. After 30% of brown rice was polished out, moisture, crude protein, and crude fat was decreased by 9%, 26% and 26% respectively, and starch value was increased by 9%. The optimum conditions for the koji in which kojic mycelium penetrate deeply were found as below. Koji making time was 40 hrs., moisture of ${\alpha}-rice$ was 40%, relative humidity during the first half of koji making time was 98%, and also the relative humidity during the second half of koji making thme was 80% and inoculum size was $1.0{\times}10^4$ spores/g ${\alpha}-rice$. 23-27% of ${\alpha}-amylase$ was inactivated and 35-70% of that was adhered during the moromi fermentation. 14% of glucoamylase was inactivated and 74-92% of that was adhered during the moromi fermentation. 13-14% of acid protease(pH 3.0) was inactivated and 70-73% of that was adhered during the moromi fermentation. Remarkable enzymatic differencies in moromi were not found between the kojies in which kojic mycelium penetrate deeply and not.

• Membrane Journal
• /
• v.6 no.3
• /
• pp.157-165
• /
• 1996

Polysulfone(PS) membranes were prepared from homogeneous PS solutions by the phase inversion technique. When propionic acid(PA) was added into a casting solution of n-methylpyrrolidone(NMP) and PS, precipitation rate of the solution film was accelerated. This kind of acceleration was consistent, even though a precipitating nonsolvent was changed from water to isopropanol. These phenomena were caused by decrease of nonsolvent tolerance in the casting solution due to addition of PA. PS powder was prepared by precipitation of a 3wt% solution in dimethylformamide(DMF) using ethanol as nonsolvent. Gas adsorption analysis of the powder showed that the capillary condensation sites were found in the powder structure. Membranes prepared from PS solution(15wt%) in NMP had the following characteristics of gas adsorption and water permeation. In gas adsorption analysis, the membrane precipitated using isopropanol showed low uptake of nitrogen gas and the capillary condensation sites were not found. On the contrary, a significant amount of the capillary condensation sites was found in the membrane coagulated by water, which was related to increase of nitrogen uptake. tn the membrane prepared froin the solution including PA, an increase of the Henry's law sites and the Langmuir sites was not found clearly. However, the capillary condensation sites were significantly increased, and the water transport also increased.

• Journal of the Korean Chemical Society
• /
• v.51 no.1
• /
• pp.43-50
• /
• 2007

Liposomes having particle size from several tens to hundreds nanometers are efficient carriers for injectable drug delivery. Enhancement of liposome stability in bloodstream has been studied because of its relatively short circulation time and fast clearance from human body by reticuloendothelial system (RES) in blood vessel. In this study, new disaccharide-1,2-distearoyl-sn-glycero-3-phosphoethanolamine (DSPE) derivatives in which lactose or sucrose as the disaccharide molecule was conjugated covalently to DSPE were synthesized. Liposomes of which surface had disaccharide molecules were prepared by incorporating the disaccharide-DSPE into liposomes as one of their lipid components. Particle size of the prepared liposomes was approximately 100 nm. The liposomes of which surface were modified with the disaccharide-DSPE showed -25 mV of zeta potential value due to the presence of hydroxyl groups on their surface, while the unmodified control liposomes showed -10 mV of zeta potential value. Loading efficiency of model drug, doxorubicin, into liposomes was about 90%. Stability of the disaccharide-modified liposomes in vitro was evaluated by monitoring the amount of protein adsorption and particle size of the liposomes in serum. Disaccharide-modified liposomes were more stable in serum than unmodified control liposomes or polyethyleneglycol (PEG)-modified liposomes due to less adsorption of serum protein and hence less increase of their particle size. The liposomes of which surface was modified with disaccharide-DSPE conjugate can be used as long-circulating carriers for drugs having high toxicity or short half-life time due to their enhanced stability in blood circulatory system.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1994.04a
• /
• pp.229-229
• /
• 1994

선택성이 높고 뛰어난 약효를 지닌 항 바이러스제의 개발은 신약개발의 중요한 영역중에 하나이다. 현재 AIDS 치료제로 사용되고 AZT를 비롯하여 항virus 효과를 나타내는 약물의 대부분은 구조적으로 nucleoside계에 속하는 화합물로서 수 많은 약리학적 연구 및 합성 화학적 연구가 이루어져 왔다. 특히 합성 화학적 측면에서 이들 화합물의 합성은 크게 두가지로 나누어지는데 그것은 sugar 부위의 변형을 통한 방법과 염기 부위의 변형을 통한 방법에 의해 새로운 항 바이러스제를 개발하는 것이다. 최근의 연구 동향에 있어서 주목할 만한 변화의 하나는 sugar 부위의 구조적 변형을 시도하는데 있어서 종래의 5원환 형태에서 환이 개열된 형태의 acyclic nucleoside에 대한 연구가 이루어져 좋은 효과를 거두고 인다는 사실이다. Acyclovir, Ganciclovir등 의 개발이 그것이다. 본 연구에서는 종래의 acyclic nucleoside가 ribose sugar의 2'번 및 3'번 탄소를 제거한 acyclic ether 형태로 되어있는 것과는 다르게 ether 부위의 산소를 탄소 치환한 carbo-acyclic nucleoside를 합성하고자 하였다. Acyclic nucleoside를 합성하고자 하였다. Acyclic nucleoside의 side chain의 conformation이 항 바이러스 작용을 나타내는데 필수 불가결한 점을 감안할때, carbo-acyclic nucleoside계 화합물은 보다 다양하게 변형될 수 있는 장점을 가지고 있다. 이러한 관점에서 side chain의 2'번 및 3'번 탄소는 side chain의 conformation을 좌우하는 결정적 요인으로 작용할 것으로 판단된다. 따라서 본 연구에서는 이들 탄소를 중심으로한 분자수식을 시도하기로 하고 bioisosterism을 이용하여 3'위치의 수소를 fluoride로 치환한 화합물을 설계하여 합성을 시도하였다.silyl group-5'-무치환 화합물을 tosyl, azido화 한다음 desilylation하여 얻었다. 목적하는(1) 화합물의 diasteromer 인 2',3'-dihydroxy-5'-무치환 유도체(3)는 (4)화합물 합성시 얻은 hemiactal을 key intermediate로 하여 TsNHNH$_2$, NaB(CN)H$_3$ 및 NaOAc로 처리하므로서 얻을수 있었다. 이들 화합물들의 각종 DNA 및 RNA virus에 대한 항 바이러스작용을 검토한 결과 현저한 항 바이러스 작용을 나타내지 않았다.분화유도 활성을 나타내어 항종양제로의 개발에 많은 흥미가 기대된다.기대된다.oxylic acid (compound 10)를 합성하였다.10^{－7}$ M)에 의한 단백인산화에 대하여는 더 미약한 억제-효과를 나타내었다. 이상의 결과는 PDE-1과 항우울약들의 항혈소판작용은 PKC-기질인 41-43 kD와 20 kD의 인산화를 억제함에 기인되는 것으로 사료된다.다. 것으로 사료된다.다.바와 같이 MCl에서 작은 Dv 값을 갖는데, 이것은 CdCl$_{4}$$^{2-}$ 착이온을 형성하거나 ZnCl$_{4}$$^{2-}$ , ZnCl$_{3}$$^{-}$같은 이온과 MgCl$^{+}$, MgCl$_{2}$같은 이온종을 형성하기 때문인것 같다. 한편 어떠한 용리액에서던지 NH$_{4}$$^{+}$의 경우 Dv값이 제일 작았다. 바. 본 연구의 목적중의 하나인 인체유해 중금속이온인 Hg(II), Cd(II)등이 NaCl같은 염화물이 함유된 시료용액에 공해이온으로 존재할 경우 흡착에 의한 제거가 가능하다. 한편 이같은 중금속이온의 흡착실험은 특히 해수중의 금속이온의 회수연구에도

• Journal of the Mineralogical Society of Korea
• /
• v.32 no.4
• /
• pp.313-321
• /
• 2019

Diatomite is a silicic porous sedimentary rock composed of diatom frustules, used for filtration aid, filler, absorbent, abrasive, carrier, insulator, and fertilizer. During the calcination of diatomite to improve physical properties for filtration-aid application, amorphous silica is transformed to cristobalite. X-ray diffraction and scanning electron microscopy studies were carried out for 17 diatomite samples, showing that 16 diatomite samples contain cristobalite in the range of 6~100 %. Concentration of respirable cristobalite in air is regulated as harmful substances, but the residual cristobalite in food is treated as generally safe substance. The determination procedure of cristobalite content in food was established for managing food safety. Calibration curve of cristobalite filtered on silver membrane were obtained by X-ray diffraction. The lower limit of quantification was evaluated as 2.7 mg. The cristobalite was not detected in the analyses of selected food samples using the established procedure.