Food Engineering Progress (산업식품공학)

Korean Society for Industrial Food Engineering (한국산업식품공학회)
권호 표지
DOI QR코드

DOI QR Code

Effects of Moisture Content and CO2 Gas Injection on Physicochemical Properties of Extruded Soy Protein Isolate

수분함량과 CO2 가스 주입에 따른 분리대두단백 압출성형물의 이화학적 특성

  • Kim, Na Yeong (Department of Food Science and Technology, Kongju National University) ;
  • Ryu, Gi Hyung (Department of Food Science and Technology, Kongju National University)
  • Received : 2017.04.20
  • Accepted : 2017.05.19
  • Published : 2017.05.31
⟨ Previous Next ⟩

Abstract

The objective of this study was to determine the effect of moisture contents (40, 50, 60%) and $CO_2$ gas injection (0 and 800 mL/min) on physicochemical properties of extruded soy protein isolate (SPI). The expansion ratio and the specific length increased, but piece density decreased with the increase in $CO_2$ gas injection from 0 to 800 mL/min at both 40 and 50% moisture contents. On the contrary, the expansion ratio and the specific length decreased, but piece density increased with the increase in $CO_2$ gas injection from 0 to 800 mL/min at 60% moisture content. Extruded SPI with $CO_2$ gas injection at 800 mL/min had small cell size and higher amount of cell than extruded SPI without $CO_2$ gas injection. The water holding capacity and nitrogen solubility index increased, and the integrity index and the texture decreased with the increase in $CO_2$ gas injection from 0 to 800 mL/min. In conclusion, extruded SPI with the $CO_2$ gas injection at 800 mL/min showed better expansion properties and cell formation than extruded SPI without the $CO_2$ gas injection.

본 연구는 수분함량(40, 50, 60%)과 $CO_2$ 가스 주입(0, 800 mL/min)에 따라 분리대두단백 조직화 압출성형물에 미치는 영향을 알아보기 위하여 이화학적 특성을 분석하였다. 압출성형 공정변수는 사입량 100 g/min, 스크루 회전속도 250 rpm, 사출구 온도 $135^{\circ}C$로 고정하였다. 수분함량이 각각 40, 50%일 때 $CO_2$ 가스 주입량이 0 mL/min에서 800 mL/min으로 증가할수록 직경팽화율과 비길이는 증가하였고 조각밀도는 감소하였다. 하지만 수분함량 60%일 때는 직경팽화율과 비길이는 감소하였고 조각밀도는 증가하였다. $CO_2$ 가스 주입량이 0 mL/min에서 800 mL/min으로 증가할수록 크기가 작은 기공들이 많이 형성되었다. 또한 $CO_2$ 가스 주입량이 0 mL/min에서 800 mL/min으로 증가할수록 수용성질소지수와 수분흡착지수는 증가하였고 조직잔사지수와 조직감은 감소하였다. $CO_2$ 가스 800 mL/min를 주입한 분리대두단백 조직화 압출성형물은 $CO_2$ 가스 0 mL/min을 주입한 분리대두단백 조직화 압출성형물보다 팽화가 잘 일어났으며 단면적이 작은 기공들이 형성되었으나 수용성질소지수와 조직잔사지수, 조직감 분석에서는 최적 조직화에 대한 연구가 더 필요한 것으로 판단되었다.

Keywords

Acknowledgement

Supported by : 한국연구재단

References

  1. AACC. 1983. Approved Method of the AACC (10th ed). Method 56-20. American Association of Cereal Chemists, St. Paul, MN, USA.
  2. Alverez-Martinez L, Kondury KP, Happer JM. 1988. A general model for expansion of extruded products. J. Food Sci. 53: 609-615. https://doi.org/10.1111/j.1365-2621.1988.tb07768.x
  3. An SH, Ryu GH. 2015. Effects of die temperature and $CO_2$ injection on physical properties and antioxidant activity of extruded rice with tomato flour. J. Korean Soc. Food Sci. Nutr. 44: 912-920 https://doi.org/10.3746/jkfn.2015.44.6.912
  4. Daun J, Kisilowsky M. 1999. Nitrogen Solubility Index (NSI) of Canola Seed and Meal Produced at Canadian and Japanese Crushing Plants. Canadian Grain Commission. Winnipeg, Manitoba, Canada.
  5. Gil SK, Choi JH, Ryu GH. 2014. Change in physical properties of cold extruded brown rice and vegetable mix at various pregelatinized brown rice content and $CO_2$ gas injection. J. Korean Soc. Food Sci. Nutr. 43: 1716-1723. https://doi.org/10.3746/jkfn.2014.43.11.1716
  6. Gu BJ, Norajit K, Ryu GH. 2010. Physicochemical properties of extruded defatted hemp seed and its energy bar manufacturing. Food Eng. Prog. 14: 127-134.
  7. Gu BJ, Ryu GH. 2012. Effect of die geometry and carbon dioxide injection on physical properties of extruded corn flour. Food Eng. Prog. 16: 83-91.
  8. Han O, Park YH, Lee SH, Lee HY, Min BL. 1989a. The texturization properties of textured extrudate made by a mixture of rice flour and isolated soybean protein. Korean J. Food Sci. Technol. 21: 780-787.
  9. Han O, Lee SH, Lee HY, Oh SL, Lee CH. 1989b. The effects of screw speed and moisture contents on soy protein under texturization using a single-screw extruder. Korean J. Food Sci. Technol. 21: 772-779.
  10. Hwang HY, Cho HY, Kim KR, Lee SH, Choi MJ, Shin JK. 2015. Hydrolysis of isolate soybean protein using subcritical water. Korean J. Food Sci. Technol. 47: 772-778. https://doi.org/10.9721/KJFST.2015.47.6.772
  11. Jin T, Gu BJ, Ryu GH. 2010. Manufacturing of hemp seed flake by using extrusion process. Food Eng. Prog. 14: 99-105.
  12. Kim JE, Hwang K, Lee SP. 2010. ACE inhibitory and hydrolytic enzyme activties in textured vegetable protein in relation to the solid state fermentation period using Basillus subtilis HA. Food Sci. Biotechnol. 19: 487-495. https://doi.org/10.1007/s10068-010-0068-0
  13. Kim CH, Jin T, Ryu GH. 2012. Effects of moisture content on physical properties of extruded cereal flours. J. Korean Soc. Food Sci. Nutr. 41: 1603-1610. https://doi.org/10.3746/jkfn.2012.41.11.1603
  14. Lin S, Huff HE, Hsieh F. 2002. Extrusion process parameters, sensory characteristics, and structural properties of a high moisture soy protein meat analog. J. Food Sci. 67: 1066-1072. https://doi.org/10.1111/j.1365-2621.2002.tb09454.x
  15. Noguchi A, Kugimiya W, Haque Z, Saio K. 1982. Physical and chemical characteristics of extruded rice flour fortified with soy protein isolate. J. Food Sci. 47: 240-245. https://doi.org/10.1111/j.1365-2621.1982.tb11069.x
  16. Noguchi A. 1990. Recent research and industrial achievements in extrusion cooking in Japan. In: Processing and Quality of Foods. I. High Temperature and Short Time Process. Zeuthen P, Cheftel JC, Eriksson C, Gormley TR, Linko P and Paulus K (eds.). Elsevier Applied Science, London. pp. 203-214.
  17. Thin T, Lin M, Ryu GH. 2016. The effects of $CO_2$ injection and barrel temperatures on the physiochemical and antioxidant properties of extruded cereals. Prev. Nutr. Food Sci. 21: 271-280. https://doi.org/10.3746/pnf.2016.21.3.271
  18. Trinh KT, Glasgow S. 2012. On the texture profile analysis test. In: Chemeca 2012. September 23-26, Wellington, New Zealand.
  19. Park JH, Park MN, Lee IS, Kim YK Kim WS, Lee YS. 2010. Effect of soy protein, its hydrolysate and peptide fraction on lipid metabolism and appetite related hormones in rats. Korean J. Nutr. 43: 342-350. https://doi.org/10.4163/kjn.2010.43.4.342
  20. Park JH, Kang DI, Ryu GH. 2016. Effect of screw speed, moisture content and die temperature on texturization of etruded soy protein isolate. J. Korean Soc. Food Sci. Nutr. 45: 1170-1176. https://doi.org/10.3746/jkfn.2016.45.8.1170
  21. Park JH, Apapan C, Ryu GH. 2017. Effects of gluten and moisture content on texturization of extruded soy protein isolate. J. Korean Soc. Food Sci. Nutr. 46: 473-480. https://doi.org/10.3746/jkfn.2017.46.4.473
  22. Ryu GH, Mulvaney SJ. 1997. Analysis of physical properties and mechanical energy input of cornmeal extrudates fortified with dairy products by carbon dioxide injection. Korean J. Food Sci. Technol. 29: 947-954.
  23. Ryu GH. 2003. Texturization of plant protein by using extrusion process. Food Eng. Prog. 7: 73-79.
  24. Yanqiang F, Bo Z, Yimin W. 2014. Effects of the specific mechanical energy on the physicochemical properties of texturized soy protein during high moisture extrusion cooking. J. Food Eng. 121: 32-38. https://doi.org/10.1016/j.jfoodeng.2013.08.002