• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.260-265
• /
• 2018

충적하천은 환경 변화에 따라 하천의 형태가 변화하고, 흐름 또한 변화하는 특성을 지닌다. 내성천은 대표적인 충적하천으로 최근 하도내 사주에 식생이 활착되고 육상화가 진행됨에 따라 식생사주 영역은 증가하고 흐름부의 하폭은 전체 하폭대비 매우 좁아진 상태이다. 따라서 하도내 흐름특성이 변화하여 저평수시 유속이 증가하고 지속적으로 하상침식이 발생하고 있다. 본 연구에서는 내성천에 위치하는 조제, 월포, 향석 관측소의 최근 10년간 강수량 및 수위자료 검토와 각 관측소 위치의 항공사진에 의한 하도내 식생활착 진행과정과 단면측량 자료를 바탕으로 횡단면 침퇴적 변화율을 검토하였다. 또한, 식생활착 및 하상침식의 영향이 수위-평균유속과 수위-유량관계의 변화 양상을 검토하였다. 검토결과 현재까지 내성천의 식생활착 및 하상침식의 원인은 지난 5년간 적은 강수량 영향으로 홍수시 하상소류력이 감소하여 흐름특성이 변화한 것이 주된 요인으로 판단된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.174-174
• /
• 2012

최근 농업용저수지의 경우 기상이변에 따른 수위조절을 위하여 다량의 수문을 일시에 개방하는 사례가 지역적으로 증가하고 있는 추세이다. 그에 따라 당초 목적인 농업용수를 위한 취수시설이 최근 홍수조절용으로 활용됨에 따른 취수시설 내 공동현상이 발생하고 있다. 이러한 공동현상으로 인해 수시설물의 안정성에 문제가 발생하고 그에 따른 2차 재해위험이 있을 수 있다. 따라서 본 연구에서는 공동현상 방지를 위해 취수시설 공기관 설계기준에 대하여 고찰하였다. 공동현상을 방지하고 홍수량을 적절하게 배제하기 위해서 유입되는 공기량산정식이 필요하다. 공기관 단면결정은 농업생산기반정비사업 설계기준(필댐)의 구조설계 부분에 정리되어 있지만 이는 이수측면에서 설계 및 시공이 진행됨에 따라서 취수에 대한 목적을 달성하기에는 어려움이 있다. 따라서 취수시설의 기능과 역할을 증대시키고자 취수시설 적정 공기관 설계를 분석하여 향후 신규, 개보수 및 현장 유지관리에 활용하기 위한 기초자료를 제시하였다. 이러한 공동현상 및 공기관 설계를 위하여 현장조사, 수치해석, 수리모형시험을 병행하여 문석하였다. 그 결과 취수탑의 형상변수와 수위에 대한 수치해석을 수행하여 변수가 소요공기량에 미치는 영향은 조절게이트 개폐율을 증가시킬수록 소요공기량이 증가하며, 약 80%의 개폐율에서 소요공기량이 최대가 되었다. 방수로 직경이 증가하면, 공기관 입구와 끝단의 압력차가 감소하여 소요공기량이 감소하고, 수위가 증가하면 소요공기량이 증가하는 것으로 분석되었다. 따라서 공동현상 방지를 위해 공기량 산정식은 취수터널에 연직수문이 설치되어 있는 6가지 흐름의 형태에 따라서 $/Q_w=0.04(F-1)^{0.85}$, $Q_a/Q_w=K(F-1)$, $Q_a/Q_w=0.014(F-1)^{1.4}$, $Q_a/Q_w=0.015(F-1)^{1.4}$의 관계식 중 적정한 것을 사용하여야 할 것으로 판단되며, 또한 공기관에 유입부의 허용부압은 수두로부터 1.0m이하로 하고, 공기관 내 풍속은 $45^m/s$를 기준으로 최대 $90^m/s$로 하여야 할 것으로 판단된다.

• Journal of Korean Society of Steel Construction
• /
• v.29 no.3
• /
• pp.249-260
• /
• 2017

In order to investigate the structural performance of a novel prefabricated-SRC column using bolt-connected steel angles(PSRC column), eccentric axial loading tests were performed for six PSRC column specimens and two conventional SRC column specimens. The test parameters were the spacing and sectional configurations of lateral reinforcement, and eccentricity ratio of axial load. The test results showed that, due to high axial-stiffness of the angles located at the corners of the cross section, the compressive load-carrying capacity and deformation capacity of the PSRC specimens were greater than those of the SRC specimens in the large eccentricity ratio of axial load. Closely spaced lateral steel plates and Z-shaped lateral steel plates improved lateral confinement, which increased the load-carrying capacity of the PSRC specimens. The combined flexural and axial load-carrying capacity of the specimens by tests and nonlinear numerical analysis were greater than the predictions by current design codes. The numerical analysis agreed well with the test results including the initial stiffness, peak strength, and post-peak strength degradation.

• Journal of the Korean Wood Science and Technology
• /
• v.28 no.3
• /
• pp.1-8
• /
• 2000

To develop the technology of producing structural board from low grade materials, an attempt was made to produce strand/particle composites from split wood strand(S) and particle(P) of (Cryptomeria japonica D. Don), which changed the layer construction and the ratio of S/P. The influence of layer construction on board properties was determined, focusing on the number and alignment of the S layers. The effect of weight ratio of S/P (3:7, 1:1, 7:3) on mechanical properties was also discussed on seven layered panel. Mechanical properties were determined from static bending tests to give parallel and perpendicular modulus of rupture (MOR) and modulus of elasticity (MOE), and the internal bond (IB) strength. In general, the surface strand layers contributed to the MOR and MOE. The parallel MOR and MOE values were the largest for the single layered S panel (only Slayers: S1), but the perpendicular MOR and MOE was the smallest. Perpendicular MOR and MOE were the largest for seven layered composite that had two cross oriented strand layers (SPSPSPS: SP7). Specimens retained more than half of their MOE and MOR after two hours in boiling water and one hour soaking. IB was the largest for the panel having only P layers, however, differences in IB strength were not identified among the other multi-layered composite panels thus the effect of layer construction on IB strength was small. Thickness swelling (TS) and surface roughness were smaller for the composite having P layers on the surface than for those having S layers. The addition of strands did not enhance the mechanical properties (MOR, MOE, IB). TS values for the panels, with which the S/P ratio was over than 1:1, was the similar to the value for the single layered S panels.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.12
• /
• pp.1906-1912
• /
• 2014

To evaluate the effect of freezing temperature on quality of blueberries, blueberry fruit was frozen at -20, -45, and $-70^{\circ}C$ immediately after harvest. After 24 hr of freezing, frozen blueberries were stored at $-20^{\circ}C$ for 2 months. Blueberries were thawed at $4^{\circ}C$ or $25^{\circ}C$ and subjected to subsequent analyses of drip ratio, fruit hardness, pH of juice, color, and sugar content. Frozen berries at all three temperatures did not show any significant difference in pH or sugar content compared with fresh berries. The drip ratio of berries decreased as the freezing temperature decreased. Thawing conditions significantly affected the drip ratio of berries frozen at $-20^{\circ}C$. Hardness of berries was significantly reduced after freeze-thawing. Freezing and thawing reduced total aerobic bacteria and yeast/mold numbers by more than 2 log regardless of freezing or thawing temperature ($4^{\circ}C$ or $25^{\circ}C$). Cross-section of blueberries did not show different shapes by freezing temperature. Further studies such as sensory evaluation are needed to determine the optimum freezing temperature regarding quality and cost.

• Journal of Animal Science and Technology
• /
• v.47 no.5
• /
• pp.731-744
• /
• 2005

Ninety Hanwoo steers(initial BW=167.2$\pm$13.4kg) were used to determine the effect of energy concentrations in concentrates and slaughter age on performance, carcass characteristics. Steers were allotted by BW to one of eighteen pens. Eighteen pens were randomly allotted to a low(70-70-71-72% for the growing, the early, the middle or the late fattening periods), medium(70-71-72-73%) or high(70-72- 73-74%) TDN level of concentrates. Five steers for each treatment of energy level were slaughtered every one month from 26 month of age to 31 month of age. Concentrates was fed restrictedly to achieve a predicted gain of 0.7-0.9kg from growing stage to middle fattening stage. All steers were fed orchard grass(Dactylis glomerata L.) hay as roughage during the growing period, fed rice straw gradually substituted for orchard grass hay during the early fattening period, and fed rice straw only thereafter. Overall body weight and feed intake were not affected by TDN levels of concentrates. Average daily gain for all treatments was higher than 0.9kg/d during the 19-21 month of age and decrease thereafter, but sustained above 0.7kg/d. Mean concentrates intake for all treatments was 1.0-1.3% of live BW during the growing period and 1.5% during the early fattening. Thereafter, it decreased up to 1.4% during the middle fattening and 1.0% during late fattening period. Delay of slaughter end point resulted in a gradual increase of rib-eye area, back fat thickness and marbling score, especially after slaughter age of 29 month there was significant increases(P<0.05). The appearance rate of 1+ and 1 grade related to the slaughter ages was 100% at 29, 30 and 31 months of age, whereas those at 26, 27 and 28 months were 93, 86 and 80%, respectively. Dressing rate was significantly(P<0.05) increased and rate of retailed cut weight significantly(P<0.05) decreased when slaughter age increased. In economic analysis, there was pronounced increase in net income up to 32-46% after slaughter age of 29 months. Under the conditions of this study, high TDN intake is not necessarily required for high quality Hanwoo meat production and slaughter age of 29 month might be the optimum for Hanwoo steers.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.1
• /
• pp.305-311
• /
• 2019

The acrylic copolymer was designed and prepared for soft lens with high content. The copolymers were prepared using 2-hydroxyethyl methacrylate(HEMA) as a monomer and ethylene glycol dimethacrylate(EGDMA), glycerol dimethacrylate(GD), or glycerol 1,3-diglycerolate diacrylate (GDD) as a cross linking agent. The water content for high water content lens was 46%, which was higher compared to general purpose of 36%. The contact angle decreased from 38.6 to 34.4, which appears hydrophilic surface. The tensile strength decreased from 0.1 Mpato 0.08, then again to 0.05 as hydrophilic properties of cross linking agents increased. No phase separation was observed in the cross section of lens using scanning electron microscope. The real-time infrared technique was used in photo-polymerization. The initial polymerization rate increased from 0.6 to 0.9, depending on crosslinking agent.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.2
• /
• pp.50-57
• /
• 2004

This study attempted to evaluate the water repellency and drying effectiveness of linseed oil treated-solid wood at high temperature by immersion. The moisture content of green wood (Pinus densiflora) sample (above 90%) was reduced about 10% after 6 hours treatment at 150℃. When the treated samples were cut into cross section along the length, it was observed that the linseed oil penetrated into up to 20% of the sample cross section area in all locations. However, a strength loss of the specimen was not detected. The pre-drilling before linseed oil treatment was effective in reducing the defects such as checks and splits, and improved the linseed oil penetration into all samples from the surfaces. The result of water absorption test of treated-wood showed that the water repellent efficacy of treated-wood was greater than that of the control. The anti-fungal activity of treated samples using five sap stains and thee decay fungi was not detected in broad-spectrum toxic mechanism. However, decay test using white rot fungi (Tyromyces palustris) and brown rot fungi (Trametes versicolor) showed that the treated sample has a decay resistance to these two fungi.

• 한국노년학
• /
• v.29 no.3
• /
• pp.789-803
• /
• 2009

We investigated the influences of positive thought about social capital on social participation of the elderly Koreans. The study design was cross-sectional analysis of the National Statistic Office Study of Korean Society Statistics Survey 2003. Participants were total of 8,586 representative samples. Two types of social participation were investigated: meeting attendance and volunteer obligations. The base model included five thoughts about social capital that must be settled as a priority in Korea, i.e., reducing the differences between the rich and the poor, reducing the crime rate, reducing regulations and corruption, improving the moral level, eliminating environmental pollution. Social participation was influenced by positive thoughts about social capital, and different kinds of thoughts had different influences on different types of social participation. The elderly who responded positively to 'reducing the differences between the rich and the poor' attended all two types of social participation more. Along with education and health status, positive thought about social capital is another important factor that influences increased social participation. It may also compensate for deteriorating health with increasing age by promoting social participation. Encouraging social participation is a good way to improve the health of the elderly, as are efforts to change thought about social capital positively.

• Resources Recycling
• /
• v.22 no.2
• /
• pp.62-70
• /
• 2013

Electric arc furnace slag is made in ironworks during steel refining, it is been increasing chemical and physical resistibility using ageing method of unstable state of melting steel slag for using concrete's fine aggregates. Which is been changing stable molecular structure of aggregates, it restrains moving of ion and molecule. In Korea, KS F 4571 has been prepared for using the electric arc furnace slag to concrete aggregates. In this study, Electric arc furnace slag is used in the PMC(Polymer Modified Concrete) which is applied a bridge pavement of rehabilitation, largely. In that case, this study evaluates the structural safety about increasing the specific weight. The 4-type bridges(RC slab bridge, RC rigid-frame bridge, PSC Beam bridge, Steel box girder bridge) pavement's increasing the total dead load is in 1 ~ 2%. Design moments in a load combination are increased less then 2%. safety factor is decreased less than 3%. Therefore, the structural safety has no problem for applying the electric arc furnace slag within PMC in bridge.