• The Transactions of the Korean Institute of Power Electronics
• /
• v.17 no.4
• /
• pp.315-321
• /
• 2012

The utility-interactive inverter with critical loads should supply continuous and stable voltage to critical loads even during the grid fault. The conventional control method which performs current control for grid-connected mode and voltage control for stand-alone mode undergoes the critical load voltage variation during grid fault. The critical load voltage may have large transient when the inverter performs mode transfer after the islanding detection. Recently, the indirect current control method which does not have the transient state during not only islanding detection but also the mode transfer has been proposed. However, since the voltage control is maintained even during the grid-connected mode it is difficult to detect the islanding. This paper proposes an active anti-islanding method suitable for the indirect current control method which does not have NDZ(Non-Detection Zone).

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.341-344
• /
• 2009

In this paper, protective function evaluation was conducted to determine the performance and safety of a power conditioning system(PCS) for 1kW residential fuel cell system. It is essential to have a power quality, grid-connection and safety of PCS. Even though it is under 500ms by KGS-A410 standard, it is shown a rapid response time of 25ms from input under-voltage test. In terms of output over/under-voltage test, it is shown 29.15 and 79.4ms. Especially using anti-islanding test, it is shown all times under 100ms for combination cases of real and reactive power. We confirmed a rapid response characteristics and safety of PCS. The results of this evaluation are being used to develop a new test protocols of PCS.

• Journal of the Korean Solar Energy Society
• /
• v.39 no.4
• /
• pp.69-77
• /
• 2019

Among the main functions of the grid-connected photovoltaic (PV) system, the anti-islanding operation function is a very important problem. Recently, due to the improvement in power generation efficiency and the maintenance advantages in PV system, the use of string inverter has increased so that the possibility of islanding operation has been raised. Generally, when a power system faults, the PV inverter must be disconnected from power system within 10 cycles by the anti-islanding operation function. However, in the real-time of power system, the output power of the PV system within 10cycles is effected. In this paper, we analyzed the effect of grid-connected PV system on power quality in a short time within 10 cycles on fault case of power system using the Matlab Simulink program.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.351-352
• /
• 2016

Since anti-islanding scheme of grid-connected inverter is a key function of standards compliance, unintentional islanding results in safety hazards, reliability, and many other issues. Therefore, many anti-islanding schemes have been researched, however, existing anti-islanding schemes show poor power quality and non-detection zone issues. Besides, most of them have problems which deteriorate performance of islanding detection under parallel-operation. Therefore, this paper proposes a new anti-islanding scheme that has both negligible power quality degradation, no non-detection zone and precise islanding detection under parallel-operation. Finally, both simulation and experimental results validate the proposed scheme.

• Proceedings of the KIPE Conference
• /
• 2009.11a
• /
• pp.299-301
• /
• 2009

In this paper, a novel anti-islanding method of DC-AC single phase inverter is proposed. The inverter injects a little harmonic current with the output current of a PCS(Power Conditioning System). When the islanding condition is occurred, the voltage harmonic components appear on the output voltage of the PCS due to the injection of a little harmonic current. So, the PCS detects the voltage harmonic components using the Goertzel algorithm, and then the PCS decides that the islanding condition is occurred. When the PCS recognizes the islanding condition, the PCS are stopped. The proposed a novel anti-islanding method is analyzed, and its validity is proven through simulation.

• Journal of the Korean Solar Energy Society
• /
• v.30 no.1
• /
• pp.7-12
• /
• 2010

As many grid-connected photovoltaic power conditioning systems (PVPCS)are installed in many residential areas simultaneously, these have raised potential problems of network protection on electrical power system. One of the numerous problems is an Islanding phenomenon. In this paper, active frequency drift (AFD) method, one of the anti-islanding methods which is analyzed by current magnitude compensation and calculation of the fundamental component. Both harmonic component and RMS value of the output current for THD analysis are provided and verified by simulation.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.04a
• /
• pp.267-271
• /
• 2011

국내에서는 고층 건축물의 화재시 피난계단으로의 연기침투를 방지하여 안전한 피난경로를 확보하기 위하여 피난계단의 부속실에 외기를 급기함으로써 부속실을 단독으로 제연하는 급기가압 제연시스템을 주로 사용하고 있다. 그러나 실제 건축물에 설치되어 운영되고 있는 급기가압 제연시스템에 대한 현장 성능평가의 결과를 검토해보면 상당수의 건축물에서 급기가압 제연시스템이 소기의 운전성능을 발휘하지 못하고 있음을 알 수 있다. 즉, 제연구역인 부속실과 옥내간의 차압이 기준치 이상의 과압으로 형성되거나 또는 반대로 기준치 이하의 저압으로 유지되는 경우가 있다. 특히 피난에 따라 부속실의 출입문이 개방되면, 출입문이 열린 층 이외의 층에서 개방 전에 적정한 수준으로 유지되고 있던 차압이 크게 하강하는 것을 알 수 있다. 본 논문에서는 이러한 급기가압 제연시스템의 문제점과 이에 대한 개선방향을 검토하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.06a
• /
• pp.225-227
• /
• 2006

The demand for developing the compact and cost effective commercial version of the photovoltaic power conditioning system(PCS) is now increasing and several commercial products are on the markets. In this paper, several design results of 10kW rated grid-tied photovoltaic PCS system are introduced, and several test results for the system evaluation are also described. The test results verified the validity of the proposed photovoltaic PCS system.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.24 no.2
• /
• pp.105-110
• /
• 2019

This study proposed a reactive power variation (RPV) method equipped with positive feedback (PF) for detecting the islanding operation of distributed generation systems. The proposed RPV consists of the constant reactive power component and a certain reactive power term and uses the frequency deviation between the rated and the measured frequencies. The constant reactive power is injected from distributed generation system and power factor is to 0.9975 in grid-connected operation. PF is activated from generation of the frequency deviation and the injected reactive power is continuously increased due to PF when islanding occurs. Consequently, the increasing reactive power causes the point of common coupling frequency to deviate from the maximum/minimum threshold level. Performance of the proposed RPV is verified in a 1.7 kW T-type inverter, and the detection times are 53 and 150 ms.

• Journal of the Korean Solar Energy Society
• /
• v.39 no.1
• /
• pp.59-66
• /
• 2019

BIPV or BAPV installation applied to building is increasing through public utility mandates enterprise. Solar PV energy generates only during the day, but if it is operated in convergence with ESS, which stores electrical energy, it can restrain the fossil energy used in buildings throughout the day. A solution is to converge with PV system and ESS. However, PV systems and ESS connected to the power grid in parallel can cause problems of electrical stability. A study was conducted on the case of failure to detect islanding operation under the parallel operation of PV generation and ESS that are connected in parallel to power grid. Experiments conducted various non-islanding detections under the operating conditions. In the experiment results, when one PCS - PV inverter or ESS inverter - was operating under the islanding condition, it stopped working within 0.5 seconds of the Korean grid standard. However, when both of PV inverter and ESS inverter were operating at the same time under the islanding situation, the anti-islanding algorithm did not operate normally and both inverters continuously supplied power to the connected RLC loads. islanding detection Algorithm developed by each inverter manufacturer has caused this phenomenon. Therefore, this paper presented a new test standard for islanding detection.