• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.274-280
• /
• 2008

The study of subjects were 8 persons. The study measured VO2max of each person and substituted METs at exercise intensity of both VO2max 50% and VO2max 70% in accordance with energy consumption formula to set exercise time at energy consumption of both 300kcal and 600kcal. And, the study substituted inclination and rate at exercise intensity that was measured at preliminary test. T, B, NK cell varied depending upon aerobic exercise to have no significant difference of exercise intensity at relative ratio of T, B, NK lymphocyte of all of lymphocytes and to have significant difference of Expenditures Calorie (p<.01) and interaction (p<.05) by T cell and Expenditures Calorie (p<.01) by B cell and Expenditures Calorie (p <.001) and interaction (p<.05) by NK cell.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.25 no.4
• /
• pp.349-360
• /
• 2009

Purpose: As the esthetic demands of dental implant patients are increased, the demands of zirconia as implant abutment material are also increased. It has non-metalic color, good biocompatibility, high strength and high toughness. Even thought the advatage of zirconia abutment, there are a few studies about mechanical properties of zirconia abutment. This study evaluated the mecanical strength with compressive bending strength and endurance limit of implant-zirconia abutment assembly. Materials and Methods: Static and cyclic loading of implant-Zirconia abutment assembly were simulated under worst case condition according to ISO. Test groups were implants of external butt joint with straight regular diameter and angled regular diameter zirconia abutment, implant of external butt joint with narrow straight diameter zirconia abutment and implant of internal conical joint with straight narrow diameter zirconia abutment. All test group were evaluated the mecanical strength with compressive bending strength and endurance limit. After fatique testing, fracture surface were examined by SEM. Results: The compressive bending strengths exceed 927N. Regular diameter zirconia abutment were stronger than narrow diameter zirconia abutment(P<.05). The endurance limits ranged from 503N to 868N. Conclusion: Within the limitation of this study, zirconia implant abutment exceeded the estabilished values for maximum incisal biting forces reported in the literature.

• Journal of Life Science
• /
• v.22 no.4
• /
• pp.532-537
• /
• 2012

We investigated the effect of smoking on cardiovascular responses during acute dynamic exercise. Eleven college students who had been smoking (duration of smoking: $7.45{\pm}0.90$ years; number of cigarettes per day: $17.72{\pm}1.22$) participated in this study. All subjects completed a graded exercise testing to determine the relative exercise intensity. The cardiovascular responses were measured at rest, and during mild and moderate exercise immediately, 24, and 48 hours after smoking. The same procedures were repeated during 24-h smoking withdrawal. All subjects were continuously instrumented to measure systolic blood pressure (SBP), diastolic blood pressure (DBP), heart rate (HR), stroke volume (SV), cardiac output (CO), and total vascular conductance (TVC) at rest and during exercise. The results showed that compared to the nicotine abstention, SBP, DBP, MAP, and HR were significantly higher at 24 and 48 hours after smoking ($p$<0.05), and CO was significantly higher at rest and during moderate exercise ($p$<0.05). There were no differences in SV and TVC before and after smoking. Thus, the results suggest that smoking is associated with an exaggerated sympathetic nerve activity during dynamic exercise. Consequently, smoking cessation may help reduce cardiac events, such as stroke and heart attack, during exercise.

• Journal of Korean Society of Steel Construction
• /
• v.22 no.1
• /
• pp.67-74
• /
• 2010

The cases of collapse of greenhouses in rural areas have been increasing due to the unexpected heavy snow load. Studies on how to prevent the collapse of greenhouses are rare, however, and the damages are repeated annually. This studysuggests two reinforcing methods: the use of ahigh-strength tapered module, and the addition of a pre-tension tie. The high-strength tapered section is installed where the bending moment is maximum. The design of a plastic greenhouse is controlled by its strength rather than its deflection. The shape of a greenhouse resembles that of an arch system, but its actual structural behavior is the frame behavior, because it is non-continually composed of a curved element (a beam) and vertical elements (columns). This system is too weak and slender to resist a vertical load, because an external load is resisted by the moment rather than by axial force. In this study, a new method, the installation of a temporary tie at the junction of the arch and the column only during snow accumulation, is proposed. The tie changes the action of the greenhouse frame to an arch action. The arch action is more effective when the pre-tension force is applied in the tie, which results in a very strong temporary structural system during snowfall. As a result of using this high-strength tapered section, the combined strength ratio of what? decreased from 10% to 30%. In the case of the additional reinforcement with a tie, it was reduced by half.

• Environmental Analysis Health and Toxicology
• /
• v.18 no.3
• /
• pp.193-197
• /
• 2003

슬러지로부터 발생하게 되는 인체에 유해하고 독성이 강한 악취물질들은, 대다수 슬러지내의 단백질, 탄수화물등의 물질들이 미생물의 호기성 및 혐기성 분해과정을 통해서 생성되는 유ㆍ무기 물질들을 포함하게 된다. 슬러지로부터 발생하는 주된 악취물질로서 hydrogen sulfide, methanethiol, dimethyl sulfide, dimethyldisulfide,dimethyltrisulfide등이 발견되어졌는데 이 다섯 종의 악취물질들은 모두가 황을 포함하는 물질들이다. 본 논문에서는 인체에 유해한 슬러지 악취의 강도 및 세기를 결정하고 비교하는 데 이용되어 질 수 있는 odor index(ODI)라는 방식이 제시되어졌다. 세가지 종류의 슬러지, 즉 hypochlorite 용액으로 처리한 슬러지와 향수 물질로 처리한 슬러지 및 아무런 처리를 하지 않은 슬러지 세 종류를 대상으로 30일이 넘는 기간동안 인체에 유해한 악취물질들에 대한 누적 odor index(ODI)값을 생성하여 비교하였다. 아무런 처리를 하지 않은 슬러지에서 가장 높은 odor index(ODI)값들이 나타났으며, 이것은 슬러지 처리에 있어서 심각한 단기 및 장기적인 유해 악취발생 문제가 야기될 수 있음을 나타낸다. 이에 대하여 hypochlorite용액으로 처리한 슬러지로부터는 인체에 유해한 악취 발생을 처리 즉시부터 30일이 넘는 기간동안 측정한계치 이하 단계로 낮출 수 있었다.

• Magazine of the Korean Society of Hazard Mitigation
• /
• v.9 no.2
• /
• pp.7-18
• /
• 2009

가뭄을 물부족과 구분하여 다시 정의하고, 이에 따라 기상적, 수문적, 농업적, 경제 사회적 가뭄으로 통일할 것을 제의햇다. 이 때 가뭄은 자연력, 즉 강수량 부족에 기인하는 재해만을 의미하며, 그 외 인력, 즉 하천유량 감소, 지하수 및 댐 수위 저하에 기인하는 재해는 가뭄으로 다루지 않고 달리 취급했다. 이에 따라 기상적 가뭄지수는, 단 한 개의 지수로 단기가뭄과 장기가뭄을 모두 표현할 수 있어야 하며, intensive measure여야 하고, 가뭄기간을 먼저 결정한 다음 강도를 결정하는 순서를 택해야 하며, 일별지수로 계산과정이 투명하게 제시되어야 하고, 가뭄 지수와는 달리 수자원의 절대량을 표시해주는 보조 자료가 필요함을 설명하며, 해결책으로 EDI의 특성을 설명했다. 아울러 현재 각국의 가뭄상황을 실시간 Monitoring하는 시스템들을 비교하고 이들이 가지는 문제점과 그 문제점들의 해결방향을 제시한다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.7 no.2
• /
• pp.143-152
• /
• 2005

Shotcrete for support of tunnel structures may contact with groundwater. The hazardous components in groundwater may cause corrosion of shotcrete. Also, the hazardous components may deteriorate the engineering properties of shotcrete, such as compressive strength, bond strength, flexural strength and so forth. The more the effect of the hazardous components on the shotcrete may increase, the more the stability of tunnel structure may decrease. The specimens were artificially immersed in various chemical solutions including hazardous components after the specimens were made at the tunnel construction site. It was performed to analyze the effect of the hazardous components in ground water on the engineering properties of shotcrete. The uniaxial compressive strength test, XRD, SEM were conducted to evaluate the durability and corrosion of shotcrete.

• Journal of Korea Water Resources Association
• /
• v.53 no.4
• /
• pp.237-247
• /
• 2020

The purpose of this study is to analyze whether design rainfall and hyetograph, which are the main elements of design rainfall, can properly reflect the those of observed rainfalls through inundated rainfall events. The target areas were selected at seven large cities with high damages regarding to the flooding. Comparative analysis between probability and observed rainfall shows that 57% of the cases, in which rainfall amount through the IDF curve is estimated lower than the observed rainfall, do not properly reflect the observed rainfalls. In particular, this trend is exacerbated by the cases in low return period and the rain type of typhoon or frontal rain. The comparative results of rainfall intensity formula showed that the Talbot and Japanese formula were stable in the short- and long-term return periods, respectively. The comparison of hyetograph results also showed that the Mononobe method properly reflects the maximum rainfall intensity and the Huff method properly reflects the shape of rainfall pattern.

• Composites Research
• /
• v.17 no.6
• /
• pp.37-43
• /
• 2004

To determine the effect of chain length and chemical structure of linear amine curing agents on thermal and mechanical properties, a standard bifunctional linear DGEBF epoxy resin was cured with EDA and HMDA having amine group at the both ends of main chain in a stoichiometrically equivalent ratio in condition of preliminary and post cure. From this work, the effect of linear amine curing agents on the thermal and mechanical properties is significantly influenced by numbers of carbon atoms of main chain. In contrast, the results show that the DCEBF/EDA system having two carbons had higher values in the thermal stability, density, shrinkage (%), grass transition temperature, tensile modulus and strength, flexural modulus and strength than the DGEBF/HMDA system having six carbons, whereas the DGEBF/EDA cure system had relatively low values in maximum ekothermic temperature, maximum conversion of epoxide, thermal expansion coefficient than the DGEBF/HDMA cure system. These findings indicate that the packing capability (rigid property) in the EDA structure affects the thermal and mechanical properties predominantly. It shows that flexural fracture properties have a close relation to flexural modulus and strength.

• International Journal of Highway Engineering
• /
• v.13 no.2
• /
• pp.1-8
• /
• 2011

The objective of this paper is to evaluate the performance of low $CO_2$ asphalt binder properties using LEADCAP$^{(R)}$(Low Energy and Carbon Asphalt Pavement) additive as function of various aging methods such as RTFO(Rolling thin film oven), Ultraviolet(UV) lay. In order to simulate the short-term aging of asphalt binder that occurs during the hot-mixing asphalt process, the Rolling Thin Film Oven(RTFO) was used. Asphalt binder using LEADCAP$^{(R)}$ is prepared by addition of a photoinitiator activated by ultraviolet lay. The mechanical and rheological properties of the asphalt binder were estimated using UTM(Universal Testing Machine) and DSR(Dynamic Shear Rheometer). The test results showed that the asphalt binder using LEADCAP$^{(R)}$ additive was improved the rutting resistance at testing temperature ($70^{\circ}C$) and increased tensile strength at low temperature. Also, Thermal analysis shows that the Melting Point(Tm) of asphalt binder using LEADCAP$^{(R)}$ additive was constant although the asphalt binder was aged by Ultraviolet.