• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2003.04a
• /
• pp.35-35
• /
• 2003

)를 금속와이어에 인가하면 저항발열에 의해 와이어가 미세한 입자나 금속증기상태로 폭발하는 현상을 이용한 것으로 기상합성법에 속한다고 할 수 있다. 선폭법은 다른 제조법에 비해 공정이 간단하여 생산비용이 저렴하며, 원재료의 조성을 갖는 분말의 합성과 금속간화합물, 융점차이가 나는 재료의 합금화 등이 가능하다. 인가에너지의 크기와 폭발 시 분위기를 제어함으로써 분말의 평균크기와 분포 제어 또한 가능하다. 본 연구는 러시아의 우수한 기초기술을 바탕으로 Pb-Sn계 합금은 전기폭발법으로 극미세분말을 제조하였으며, 분말의 형상, 상 화학조성의 변화를 조사하였다. 본 실험에 사용된 Sn-Pb계(All-Union State Standard 1499-70, 0.53mm)합금와이어는 자동시스템(1-0.6Hz)에 의해 챔버안으로 공급되었다. 이 때 임계폭발 와이어 길이는 50-80nm으로 실험을 행하였다. 챔버 압력은 1.4~2.0atm으로 유지하였다. 제조된 분말의 특성은 XRD, XRPES, SEM등을 이용하여 분말의 형상과 상, 화학조성, 표면분석을 행하였으며 DSC, TGA, BET분석을 통하여 온도변화에 따른 금속분말의 열량변화, 질량변화, 비표면적을 측정하였다. 제조된 Sn-Pb계 분말은 모두 평균 입도 117nm~220nm의 구형형상이었다. 이때 합금분말의 조성은 51.17~63.21 at%Sn, 35.47~46.37 at%Pb로 나타났다. 와이어에 인가되는 비에너지(W/Wc)가 감소된에 EK라 표면층의 Pb함량이 증가함을 보였다. 이는 와이어 내부 저항의 감소로 인한 공정시간의 지연과 Sn, Pb의 확산계수 차이에 의한 것으로 사료된다. 열분석 결과, Sn~Pb계 화합물의 융점은 167~$169^{\circ}C$로 관찰되었으며, $10^{\circ}C$/min로 $920^{\circ}C$까지 승은 하였을 때 17.1~18 wt%의 질량증가를 보였다.TEX>계 나노복합분말이 얻어짐을 알 수 있었다. 이 때 X션 회절피크의 line broadening으로부터 복합분말의 Fe 명균 결정립 크기는 24nm로 초미세 결정럽의 분말합금이었다. 포화자화값은 볼밀처리에 따라 점점 증가하여 MA 30시간에는 20.3emu/g로 포화됨을 알 수 있었다. 또한 보자력 Hc는 MA초기단계에 350e로 매우 낮으나 30시간 후에는 Hc값이 2600e로 매우 큰 값을 나타내었다. 이것은 환원반응결과 초기에 생성된 Fe의 결정립이 비교적 크고 결정결함이 적으나 볼밀처리를 30시간까지 행하면 Fe 결정렵의 미세화 빛 strain 증가로 magnetic hardening이 일어나기 때문인 것으로 사료된다.길이가 50, 30cm인 압출재를 제조하였다. 열간압출한 후의 미세조직을 광학현미경으로 압출방향에 평행한 방향과 수직방향으로 관찰하였고, 열간 압출재 이방성을 검토하기 위하여 X선 회절분석을 실실하여 결정방위를 확인하였다. 전기 비저항 및 Seebeck 계수 측정을 위하여 각각 2$\times$2$\times$10$mm^3$ 그리고 5$\times$5$\times$10TEX>$mm^3$ 크기의 시편을 준비하였다.준비하였다.전류를 구성하는 주요 입자의 에너지 영역(75~l13keV)에서 가장 높은(0.80) 상관계수를 기록했다. 넷째, 회복기 중에 일어나는 입자들의 유입은 자기폭풍의 지속시간을 연장시키는 경향을 보이며 큰 자기폭풍일수록 현저했다. 주상에서 관측된 이러한 특성은 서브스톰 확장기 활동이 자기폭풍의 발달과 밀접한 관계가 있음을 시사한다.se that were all low in two aspects, named "the Nonsignificant group". And the issues were high risk perception in general setting and lo

• Journal of Navigation and Port Research
• /
• v.44 no.3
• /
• pp.195-202
• /
• 2020

The production of larger of ships is a survival strategy for global shipping companies to pursue the economics of scale. According to this strategy, to respond to this situation, many containers are loading/unloading simultaneously in the hub port. Additionally, the container terminals are promoting the introduction of automation to expand the terminal facilities and increase efficiency/productivity of the container yards. European ports have introduced automation to address rising labor costs and shortages of labor. Recently, the construction of fully automated container terminals is increasing in the United States and China to resolve problems such as the slow growth of the global economy, the emergence of large ships, air pollution, and safety accidents. Domestic ports are at an early stage compared to the world's advanced container terminals, and countermeasures are being prepared to respond to the changing ports. However, research on the recognition difference analysis that examines the opinions of stakeholders is insufficient. As a result of analyzing the recognition among the groups, it was found that container terminal operators reduced labor costs, improved shipping services for shipping companies, prevented safety accidents for port union labor, and increased service for port authority and government agencies. Thus, to closely examine the perception among the groups, one-way ANOVA was performed, and then the implications were deduced as the basic data for the smooth introduction of automation.

• Journal of Sericultural and Entomological Science
• /
• v.52 no.2
• /
• pp.102-109
• /
• 2014

We constructed the fibroin H-chain expression system to produce enhanced yellow fluorescent proteins (EYFP) in the silk of transgenic silkworm. Fluorescent silk could be made by fusing EYFP cDNA to the heavy chain gene and injecting it into a silkworm. The EYFP fusion protein, each with N- and C-terminal sequences of the fibroin H-chain, was designed to be secreted into the lumen of the posterior silk glands. The expression of the EYFP/H-chain fusion gene was regulated by the fibroin H-chain promoter. The yellow fluorescence proving that the fusion protein was present in the silk. Accordingly, we suggest that the EYFP fluorescence silk will enable the production of novel biomaterial based on the transgenic silk.

• Journal of Sericultural and Entomological Science
• /
• v.50 no.2
• /
• pp.87-92
• /
• 2012

We constructed the fibroin H-chain expression system to produce Discosoma sp. red fluorescent protein variant2 (DsRed2) in transgenic silkworm cocoon. Fluorescent cocoon could be made by fusing DsRed2 cDNA to the heavy chain gene and injecting it into a silkworm. The DsRed2 fusion protein, each with N- and C-terminal sequences of the fibroin H-chain, was designed to be secreted into the lumen of the posterior silk glands. The expression of the DsRed2/H-chain fusion gene was regulated by the fibroin H-chain promoter. The use of the 3xP3-driven EGFP cDNA as a marker allowed us to rapidly distinguish transgenic silkworms. The EGFP fluorescence became visible in the ocelli and in the central and peripheral nervous system on the seventh day of embryonic development. A mixture of the donor and helper vector was micro-injected into 1,020 Kumokjam, bivoltin silkworm eggs. We obtained 6 broods. The cocoon was displayed strong red fluorescence, proving that the fusion protein was present in the cocoon. Accordingly, we suggest that the DsRed2 fluorescence silk will enable the production of novel biomaterial based on the transgenic silk.

• Journal of Digital Convergence
• /
• v.17 no.3
• /
• pp.235-251
• /
• 2019

The purpose of this study was to investigate the single-person household's demand for a wearable healthcare system that provides the ischemic heart disease and cardiopulmonary alarm to be developed. In this study, in-depth interviews were conducted with six unmarried individuals in their thirties who were in the workplace and the results were interpreted by Giorgi's phenomenological analysis method. The study results indicated that although the wearable healthcare system was implemented with high-technology functions that serve the intended purpose, it is necessary to comprehensively consider factors such as aesthetics, comfort, and ease of washing. In this study, we found that the variables influencing the interviewees' intent to accept healthcare services are complex and cannot be attributed to one factor alone; this study has also shown a variety of interpersonal correlations. In addition, although health-care research focusing on the elderly has been conducted in the past, it is suggested that younger generations such as those in their thirties can also be studied as health care service adopters.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.2
• /
• pp.129-144
• /
• 2019

This study aimed at developing an accelerated collection method that reduces measurement and collection time by improving and complementing the desiccator method, which is mainly used for quality control in wood-based panels and furniture production sites. First, this study measured the formaldehyde emissions from the wood-based panels by grade using the desiccator method. Further, this study compared the desiccator method with the developed process and analyzed the correlation in optimal temperature, time, and exposed area. The results showed that the developed process resulted in relatively similar outcomes in comparison to the desiccator method when the temperature was $100^{\circ}C$, the time was 1 h, and two specimens were used, at which the correlation was high. To verify the developed process, this study commissioned Korea Conformity Laboratories with the standardized temperature, time, and the number of specimens to compare them with the specimen that was not used in the actual test. As a result, the correlation to the desiccator method was shown to be very high. However, the formaldehyde emission measured by the accelerated collection process was mostly higher than that measured by the desiccator method. The formaldehyde emission grades from several specimens were one level higher. However, from the perspectives of quality control, it was determined that the accelerated collection method developed in this study could be sufficiently used.

• Food Science and Industry
• /
• v.52 no.3
• /
• pp.261-271
• /
• 2019

Gut microbiome have recently provided evidence that the gut microbiota are capable of greatly influencing all aspects of physiology and immunology. Although a number of recent studies have shown that probiotics can modulate gut microbiota structure, the mechanism underlying this effect remains to be elucidated. In a disease state, the relative abundances of beneficial gut bacteria are generally reduced, which is restored by constant probiotic supplementation. Oral administration of probiotics improved the disease state by (1) inducing differentiation and function of regulatory T cells, (2) reducing inflammatory response, (3) modulating the gut environment, and (4) increasing the proportions of short-chain fatty acid- or beneficial metabolite-producing gut microbiota including the genera Bifidobacterium, Faecalibacterium, Akkermansia, etc. In this review, current knowledge on how probiotics can influence host's health by altering gut microbiota structure and on how probiotics and beneficial gut bacteria can be applied as next-generation probiotics will be discussed.

• Journal of Korean Library and Information Science Society
• /
• v.51 no.4
• /
• pp.83-100
• /
• 2020

The importance of data publishing in the open-science era is increasing as it can contribute to other scientific discoveries by accelerating the sharing of research data, improving accessibility and citability, and providing standardized technical documentation for research data. In addition, the need for data papers is emerging as a way for data papers to maintain a status equivalent to research papers, and the publication of data journals is on the rise as a new type of scholarly publishing. In particular, the field of Ecology is a field where large-scale research data are produced and managed, thus the data journal publishing in this field is active worldwide. On the other hand, the research on data journal is in its early stages in Korea, and there is no data journal in the field of Ecology. Thus, this study explores and presents strategies for publishing data journals in the ecological field. First, we investigate the publishing status of domestic and international data journals and the publication status of domestic journals. Then, we conducted a focused group interview with experts of scholarly publishing, open access policy and journal publishing in the field of Ecology. Finally, based on the survey and the expert FGI's results, strategies are suggested in terms of publishing data journals in the field of ecology, organizing and publishing journals, organizing journal editors, and receiving manuscripts.

• Journal of Korea Water Resources Association
• /
• v.54 no.2
• /
• pp.81-91
• /
• 2021

Synthetic Apreture Radar (SAR) is attracting attentions with its possibility of producing high resolution data that can be used for soil moisture estimation. High resolution soil moisture data enables more specific observation of soil moisture than existing soil moisture products from other satellites. It can also be used for studies of wildfire, landslide, and flood. The SAR based soil moisture estimation should be conducted considering vegetation, which affects backscattering signals from the SAR sensor. In this study, a SAR based soil moisture estimation at regions covered with various vegetation types on the middle area of Korea (Cropland, Grassland, Forest) is conducted. The representative backscattering model, Water Cloud Model (WCM) is used for soil moisture estimation over vegetated areas. Radar Vegetation Index (RVI) and in-situ soil moisture data are used as input factors for the model. Total 6 study areas are selected for 3 vegetation types according to land cover classification with 2 sites per each vegetation type. Soil moisture evaluation result shows that the accuracy of each site stands out in the order of grassland, forest, and cropland. Forested area shows correlation coefficient value higher than 0.5 even with the most dense vegetation, while cropland shows correlation coefficient value lower than 0.3. The proper vegetation and soil moisture conditions for SAR based soil moisture estimation are suggested through the results of the study. Future study, which utilizes additional ancillary vegetation data (vegetation height, vegetation type) is thought to be necessary.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.211-217
• /
• 2020

Technology planning in the defense field aims to develop core technologies in order to develop weapon systems to satisfy the force integration period by researching and analyzing necessary technologies for weapon systems. In the past, core technology development projects were conducted by deriving core technology based on the main required operational capability. But in this case, there is the limitation that technologies which are necessary to develop weapon systems but do not directly affect required operational capability, such as system integration technologies, are not considered. In this paper, we propose a work breakdown structure-based technology research and analysis methodology that prevents vacant technologies by identifying core technologies that must be secured for the development of weapon systems at the component level. With the proposed methodology, it is possible to identify technologies that must be acquired to realize the required operational capability of systems or which must be secured even they do not affect the required operational capability.