• Korean Journal of Crystallography
• /
• v.7 no.2
• /
• pp.183-190
• /
• 1996

Single crystals of ZnO were grown hydrothermally with KOH solution in silver lined autoclave. The effect of LiOH and NH4OH on the morphology of as-grown crystals was studied. As-grown crystals were pale green and the maximum size was 30×30×20mm3. Addition of LiOH reduced the density of flaws on the (0001) face of as-grown ZnO crystals. In highly concentrated KOH solution, ZnO had a strong tendency to grow along the c-axis. When 1.0-2.0 M of NH4OH was added into mineralizer, growth rate along the direction of a-axis increased. From this result, ZnO single crystals of equant-faced hexagonal prism could be grown with acicular seeds.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.1
• /
• pp.1-7
• /
• 2013

The three-dimensional structure of the proteins, including the location of the hydrogen atoms can be analyzed by using neutron diffraction. In order to grow single crystals for neutron diffraction experiments, we developed a simple magnetic field device with the commercial magnets and succeeded in growing hen egg-white lysozyme single crystals of more than 1 $mm^3$ in volume using this device. The crystals grown with a magnetic field were larger and had perfect transparency, whereas the crystals grown without a magnetic field had micro-cracks. The result of the X-ray measurement showed a good resolution and small mosaicity for the crystals grown in the presence of a magnetic field.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.29 no.4
• /
• pp.149-153
• /
• 2019

HVPE is one of the GaN single crystal manufacturing methods which has been commercially widely used due to its high growth rate. HVPE method consists of a number of processes, in particular the nitridation of the substrate prior to GaN growth has a significant effect on the crystalline quality of the manufactured GaN single crystal. In this study, we investigated the effect of nitridation for crystalline quality of GaN when it was grown on the sapphire substrate. The whole growth conditions except for the nitridation process were the same, and the gas flow rate supplied to the sapphire substrate was variously changed during the nitridation. Here, we examined the effect of nitridation via the surface characterization of GaN single crystal grown by HVPE.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.4 no.2
• /
• pp.134-138
• /
• 1994

$LiTaO_3 (LT)$ single crystals (Y, X-axis) were grown from the congruent composition, 48.65 mole %, $Li_2O$ for SAW (Surface Acoustic Wave) applications. Basic SAW filters were fabricated on the RIST prepared LT wafers (Y-cut) using phtolithography. SAW filter performance was evaluated. The results were compared of the SAW characteristics between RIST prepared LT wafer (Y-cut) and commercial Yamaju wafer (Y-cut). The SAW filter prepared on the RIST grown LT wafer was shown better SAW performances than that of Yamaju wafer.

• Korean Journal of Crystallography
• /
• v.4 no.2
• /
• pp.74-85
• /
• 1993

Single crystals of LiNbO3 have found extensive application in electro-optic and nonlinear optic devices. However, laser-induced refartive index inhomogeneities, which have been labeled opical damage impose limits on device optical damage in LiNbO3 is imporved if more than 4.5 rml% MgO is added to the melt The laser damage thrueshold increased as much as 100 times better then that of undoped crystals. The MgO doped cystal has thus been urterlsiv81y studied since then. In the study, Mgo:LiNbOs(MLA) single crystals dopsd with 0, 2.5, 5.0, 7.5, 10.0 mol% MgO have been grown by the czocrualski technique. The metls were prepared in the platinum crluible and 15∼20mm diameter crystals were grown with a length of 20∼30mm in a resitance heater. The growth rate was 2.5mm/hr, the rotation speed 15rpn. Before sawing MLN single crystals were annealed for 24 hours under atmosphere at a temperature of 1080℃. After sawing, we have found an annual ring cross section of MNA crystals only in the direction of perpendicilar to the c-axis. Nonuniform dispusion of MgO was pointed out that the cuties of the state of oxide were strongly affected by oxygen partial pressure in.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.5
• /
• pp.169-174
• /
• 2022

This study is to verify the feasibility of SiC single crystal growth using recycled SiC powder. The fundamental physical properties such as particle size, shape, composition and impurities of the recycled powder were analyzed, and the sublimation behavior occurring inside the reactor were predicted using the basic data. As a result of comprehensive judgment, the physical properties of the recycled powder were suitable for single crystal growth, and single crystal growth experiments were conducted using this. 100 mm 4H-SiC single crystal ingot with a height of 25 mm was grown without polytype inclusion. In the case of micro-pipe density was 0.02 ea/cm² and resistivity characteristics was 0.015~0.020 ohm·cm², commercial level quality was obtained, but additional analysis related to dislocation density and stacking faults is required for device application.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.14 no.6
• /
• pp.262-266
• /
• 2004

Rutile single crystals were grown by the skull melting method. Ti metal ring was used for initial RF induction heating. The grown crystals were cut into wafer of 5.5 mm diameter and 1mm thickness. The wafers were annealed in air at $1300^{\circ}C$ up to 15 hours and their transmittance spectra $(\lambda= 200~25000 nm)$ were obtained.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.1 no.1
• /
• pp.74-81
• /
• 1991

The temperature profile of Czochralski single crystal growth system was simulated considering the fluid flow and surface radiation heat transfer. View factors of surface elements were calculated for radiation heat transfer. Two phases(solid and liquid) were treated as a continuous phase by assigning artificial large viscosity to the solid phase and latent heat was accounted by iterative heat revolution method. The solidification model was applied to solid front of the pure Ga during the melting to verify the model. The whole simulation model of CZ system was applied to the growth Al single crystal.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.22-22
• /
• 2009

최근 산화물 반도체와 나노소자 대한 관심이 날로 높아지고 있는 가운데 산화아연(ZnO) 나노구조를 이용한 나노소자 제작이 많이 연구되고 있다. 산화아연은 c축으로 우선 배향성을 가지는 우르짜이트 구조로써, 나노선 성장이 다른 산화물에 비해 용이하고 그 물리적, 화학적 특성이 안정 무수하다. 이러한 산화아연 나노선 제작법 가운데, 유기금속화학기상증착법은 다른 성장법에 비해 결정학적 광학적 특성이 우수하고 성장속도가 빨라 고품질 나노선 성장에 용이한 장비로 각광받고 있다. 하지만 bottom-up 공정을 기반으로 한 나노소자제작에서 몇 가지 문제점을 가지고 있다. 1) 수직형 대면적 성장, 2) 나노선 밀도 조절의 어려움, 3) 기판과의 계면층에 자발적으로 생성되는 계면층의 제거, 4) 고온성장시 precursor의 증발 문제 등이 그것이다. 본인은 이러한 문제점을 해결하기 위해 산화아연 나노구조 성장 시, 마그네슘(Mg)을 도입하여, 각 원소의 함량 분포 정도에 따라 기판 표면에 30nm 두께 미만의 상분리층(단결정+비정질층)을 자발적으로 형성시켰다. 성장이 진행됨에 따라, 아연이 rich한 단결정 층에서는 나노선이 선택적으로 성장하게 하였고, 마그네슘이 rich한 비정질 층에서는 성장이 이루어지지 않게 하였다. 따라서 산화아연이 증발되는 온도영역에서 10nm 이하 직경을 가지는 나노선을 자발적으로 계면층 없이 수직 성장하였다. 또한, 표면의 단결정, 비정질의 사이즈를 Mg 함량으로 적절히 조절한 결과, 산화아연계 나노월 구조성장이 가능하였다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.4
• /
• pp.528-535
• /
• 1997

$LiTaO_3$ single crystals of congruently melting composition were grown by the halogen lamp type floating zone system. Calcination and sintering parameters for the growth were established. Optimum crystal growth conditions were investigated by a controlling of growth rates, rotation speeds and atmospheres. Based on the melting aspect and the shape of molten zone, stable conditions could not be found in air or Na atmosphere. However the growth stability in Ar atmosphere was more regular than that in air or $N_2$. The grown crystals were characterized using Laue back reflection, Curie temperature, refractive index and transmittance. Curie temperature fluctuation in the section of the grown crystal part of top, body and tail was $1^{\circ}C$.