• Journal of Biomedical Engineering Research
• /
• v.21 no.4
• /
• pp.345-351
• /
• 2000

This study is to dvelop a radiotelemetry system to transmit and receive ECG (electrocardiograph) and event signals by using the frequency division multiplexing(FDM) technique. ECG signal sensed by the electrodes is amplified and added to the event signals acting in different frequency range for lead-off, nurse call and low level battery by using FDM. The sub-carrier oscillator using Colpitts circuits and main carrier frequency which is multiplied is frequency modulated by this superhetrodyne technique, and demodulated from the compose IF signal through the quadrature demodulator. A pulse counter demodulator and filtering circuits extract the original ECG and event signals.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.8
• /
• pp.1790-1795
• /
• 2013

The current velocity and turbulence information in each range cell can be obtained from the first and second Doppler spectrum moment estimates. However, the very widely used correlation method often called as the pulse-pair method has the inherent restrictions under the highly turbulent conditions since it does not satisfy the assumptions that the return Doppler spectrum should be symmetric and have a single peak value. Therefore, in this paper, the quality of pulse-pair estimates were compared with that of FFT estimates for problem analysis using various shapes of simulated Doppler spectra. It can be known that the pulse-pair method often yields meaningless results if the received signals are severely biased or multi-peak Doppler spectra in the Doppler frequency domain.

• Journal of Convergence for Information Technology
• /
• v.12 no.4
• /
• pp.9-13
• /
• 2022

In this paper, the tracking error of monopulse radar caused by cross-eye jamming using terrain bounce is analyzed. Cross-eye jamming is a method of generating an error in a radar tracking system by simultaneously transmitting two signals with different phases and amplitudes. When the monopulse radar receives the cross-eye jamming signal generated by the terrain bounce, a tracking error occurs in the elevation direction. In the presence of multipath, this signal is a combination of the direct target return and a return seemingly emanating from the target image beneath the terrain surface. Terrain bounce jamming has the advantage of using a single jammer, but the space affecting the jamming is limited by the terrain reflection angle and the degree of scattering of the terrain. This study can be usefully used to protect ships from low-altitude missiles or aircraft in the sea.

• The Journal of the Korea Contents Association
• /
• v.10 no.2
• /
• pp.72-80
• /
• 2010

The 1Gbps clock and data recovery (CDR) circuit using the proposed multi-point phase detector (PD) is presented. The proposed phase detector generates up/down signals comparing 3-point that is data transition point and clock rising/falling edge. The conventional PD uses the pulse width modulation (PWM) that controls the voltage controlled oscillator (VCO) using the width of a pulse period's multiple. However, the proposed PD uses the pulse number modulation (PNM) that regulates the VCO with the number of half clock cycle pulse. Therefore the proposed PD can controls VCO preciously and reduces the jitter. The CDR circuit is tested using 1Gbps $2^{31}-1$ pseudo random bit sequence (PRBS) input data. The designed CDR circuit shows that is capable of recovering clock and data at rates of 1Gbps. The recovered clock jitter is 7.36ps at 1GHz and the total power consumption is about 12mW. The proposed circuit is implemented using a 0.18um CMOS process under 1.8V supply.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11B
• /
• pp.1501-1509
• /
• 2001

Recently, the use of wireless communication systems has been rapidly increasing, which results in a difficult problem in efficient control of limited frequency resources. As a way of solving this problem, the ultra wideband time hopping impulse radio system attracts much attention. The impulse radio system communicates pulse position modulated data using Gaussian monocycle pulses of very short duration less than 1 nsec. Thus the transmitted signal has very low power spectral density and ultra wide bandwidth from near D.C. to a few GHz. It is blown that it hardly interferes with the existing communication systems because of its very low power spectral density. The purpose of this paper is to characterize multipath propagation of the impulse radio signal and to evaluate the performance of the correlator-based receiver for the multipath environments. In this paper, we consider the deterministic two-path model and the statistical indoor multipath model of Saleh and Valenzuela. For the two-path model the output of the correlator with the ideal reference waveform varies according to the relative difference between the indirect path delay and the time interval of PPM, and to the indirect path gains. In addition, the characteristics of bit error rates is measured for the two models through computer simulation. The simulation results indicate that the performance of the impulse radio system depends both on the relative difference between the indirect path delay and the time interval of PPM, and on the indirect path gains. Furthermore, it is observed that the reference signal designed for the AWGN channel can not be applied to the multipath channels.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.11b
• /
• pp.601-604
• /
• 2002

본 논문에서는 UWB(초광대역 : Ultra-Wideband) 시스템에서 FCC 위원회에서 제안한 규정을 근거로 산출된 파라미터를 이용하여 M-ary PPM 시스템에서 고려되는 파라미터 값의 관계를 분석한 후 최적의 파라미터 값을 산출하였다. AWGN 채널에서 다중 접속을 고려하지 않은 단일 사용자일 경우로 가정시, 펄스 반복 개수 N/sub s/가 변화함에 따른 BER 특성과 M=4, 8인 경우 채널부호화 기법을 채용시 성능 개선으로 부호율 R(1/2, 1/3)과 구속장 K(7, 9)에 따른 Convolution 부호화를 고려하였을 경우 BER 특성을 분석하였다.

• Journal of Biomedical Engineering Research
• /
• v.7 no.1
• /
• pp.75-79
• /
• 1986

In this paper, a multigate pulsed doppler system with parallel signal processing which enables the transcutaneous assesment of the blood-flow velocities of five adjacent sample volumes is developed. The outputs of the system are audio signals, velocity curves and velocity profiles of 5 adjacent sample volumes. We have applied to the major superficial arteries and obtained the detailed information about the time dependent blood-flow behavior.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.11a
• /
• pp.172-176
• /
• 2002

본 논문에서는 UWB(초광대역 : Ultra-Wideband) 시스템에서 FCC 위원회에서 제안한 규정을 근거로 산출된 파라미터를 이용하여 M-ary PPM 시스템에서 고려되는 파라미터 값의 관계를 분석한 후 최적의 파라미터 값을 산출하였다. AWGN 채널에서 다중 접속을 고려하지 않은 단일 사용자일 경우로 가정시, 펄스 반복 개수 Ns가 변화함에 따른 BER 특성과 M=4, 8인 경우 채널 부호화 기법을 채용시 성능 개선으로 BCH와 Convolution 부호화를 고려하였을 경우 BER 특성을 분석하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.851-852
• /
• 2011

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.02a
• /
• pp.98-99
• /
• 2000

코어 가까이 측면 연마한 광섬유를 이용하여 광 여파기, 편광기, 감쇠기등의 광통신 소자로 응용하고자 하는 연구가 많이 진행되고 있다.$^{[1]}$ 이 소자는 광섬유를 절단하지 않은 상태에서 코어 가까이 측면 연마하여 광학적 기능을 가진 소자를 제작함으로서 공정이 간단하고 삽입손실이 작은 특성을 가지며 기계적 신뢰성이 우수하다. 측면 연마된 광섬유를 이용한 광 증폭의 경우 광섬유의 소산장(evanescent field)과 펌핑광에 의해서 여기되는 활성 물질과의 상호작용에 의해서 광 이득을 얻는다. 소산장 결합에 의한 평면도파로에서의 광 증폭$^{[2]}$ 과 다중 모드 광섬유에서의 펄스 레이저 증폭, 단일 모드 광섬유에서 632.8nm He-Ne 레이저의 연속광원 증폭$^{[3]}$ 은 이미 보고되었다. 본 논문에서는 측면 연마된 다중 모드 광섬유의 연마된 부위에 색소가 첨가된 용액을 떨어뜨림으로서 발생하는 소산장 결합에 의해서 광섬유내를 진행하는 연속적인 He-Ne 레이저 광을 증폭시키는 방법을 제안하고자 한다. (중략)