• Proceedings of the Korean Society of Computer Information Conference
• /
• 2012.07a
• /
• pp.47-50
• /
• 2012

본 연구에서는 수용가에서 에너지 절감과 최대수요전력 제어를 위하여 마이크로프로세서를 이용한 고효율 자동 전압 조정기의 제어 방법에 대하여 제안한다. 제안한 고효율 자동 전압 조정기는 트로이달 코아에 1개의 직렬 권선과 분리된 4개의 분로 권선으로 구성되어 있는 단권 변압기를 사용한다. 변압기의 전압 조정은 직렬 권선과 분로 권선의 연결 방법에 따라 감압/승압이 가능하다. 스위치는 릴레이와 트라이악을 병행하여 사용한다. 스위치의 조작 시 발생하는 권선의 여자돌입전류를 제어하기 위하여 트라이악을 이용 연결 상태를 변경하고 연결 상태 유지 시에는 릴레이를 이용함으로써 스위치 소비 전력을 최소화 한다. 제어신호는 여자 돌입 전류를 줄이기 위하여 전압 파형에 동기화 하여 제어되며 이를 위하여 소프트웨어 PLL을 사용한다. 소프트웨어 PLL은 전압 파형의 zero-cross, 전압 최고점 등의 시간을 생성한다. 권선 스위치의 제어, 소프트웨어 PLL등 자동 전압 조정기의 제어는 마이크로프로세서에 의해서 이루어진다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.4
• /
• pp.321-327
• /
• 2006

In this paper, An Automatic Synchronous Switch Post Regulator for Multi-Output Flyback Converter is proposed. The proposed circuit is composed simply using a new automatic synchronous switch instead of conventional complex Switch Post Regulator owing to difficulty of drive circuit materialization and synchronization between main output and auxiliary output. By using the proposed circuit, we can make simple and inexpensive Multi-Output Converter with variable and accurate output voltage and proved adequacy of proposed circuit through experiment, simulation and theoretical analysis.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2019.01a
• /
• pp.29-30
• /
• 2019

본 논문에서는 다중 컨트롤러가 존재하는 분산 SDN 환경에서 과도한 제어 메시지로 인한 과부하된 컨트롤러의 부하를 줄이기 위하여 이주할 스위치를 K-means 군집화와 Harmony Search(HS)를 기반으로 선정 하는 기법을 제안하였다. 기존에 HS를 이용하여 이주할 스위치를 선택하는 기법이 제시되었으나, 시간 소모에 비하여 정확도가 부족한 단점이 있다. 또한 Harmony Memory(HM) 구축을 위해 메모리 소모 또한 크다. 이를 해결하기 위하여 본 논문에서는 유클리드 거리를 기반으로 하는 K-means 군집화를 이용하여 이주할 스위치를 골라내어 HM의 크기를 줄이고 이주 효율을 향상 시킨다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2001.04a
• /
• pp.490-492
• /
• 2001

본 논문은 ATM 멀티캐스트 스위치를 위한 새로운 복사망을 제안하였다. Lee의 복사망과 그 이후 제안된 복사망에서 문제가 된 오버플로우와 충돌 문제를 해결하기 위해 다중경로와 다중출력을 갖는 B-tree 네트워크를 사용하였다. 또한 높은 부하에도 충돌을 줄이고 복사망의 성능을 높이기 위해 B-Tree 네트워크의 각 SE에 출력 및 공유 버퍼 성격을 지닌 크로스포인트 버퍼를 추가한 IBBT 네트워크를 제안하였다. 제안된 복사망은 Lee의 복사망의 특성을 유지하며, 이 IBBT 네트워크를 복사망의 BBN에 적용하고, 셀 분할 알고리즘을 사용하여 복사망의 성능을 향상 시켰다.

• Journal of KIISE:Information Networking
• /
• v.29 no.6
• /
• pp.696-705
• /
• 2002

This paper presents a new copy network for multicast ATM switches. Many studies have been carried out up to date since the proposition of Lee's copy network. However, the overflows and cell conflicts within the switch have still been raised a problem in argument. In order to reduce those problems, we proposed a 3-dimensional multicast switching architecture which has shared buffers in this paper. The proposed architecture can reduce the overflows and cell conflicts through multiple paths and output ports even in the high load environments. Also, we proposed a cell splitting algorithm which handles the cell in the case of large fan-out, and a copy network to increase throughput by expanding the Lee's Broadcast Banyan Network(BBN). Cell copy uses the Boolean interval splitting algorithm and the multicast pattern of the cells according to the self-routing characteristics of the network. In the proposed copy network, we improve the problems such as overflow, cell splitting of large fanout, cell conflicts, etc., which were still existed in the Lee's network. The results of performance evaluation by computer simulation show that the proposed scheme has better throughput, cell loss rate and cell delay than the conventional method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.1
• /
• pp.80-90
• /
• 1996

The efficienty of ATM is based on the statical multiplexing of fixed-length packets, which are called cells. The most important technical point for realizing ATM switching network is an arrangement of the buffers and switches. Current most ATM switching networks are being achieved by using the switching modules based on the unit switch of $8{\times}8$ 150Mb/s or $16{\times}16$ 150Mb/s, the unit switch of $32{\times}32$150Mb/s for a large scale system is under study in many countries. In this paper, we proposed a new $32{\times}32$(4.9Gb/s throughput) ATM switch using Shared buffer memory switch which provides superior traffic characteristics in the cell loss, delay and throughput performance and easy LSI(Large Scale Integrated circuit). We analytically estimated and simulated by computer the buffer size into it. We also proposed the configuration of the large capacity ATM switching network($M{\times}M$.M>1,000) consisting of multistage to improve the link speed by non-blocking.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.744-749
• /
• 2016

This paper presents the design of a computer-generated hologram for beam control of an LCOS-based wavelength selective switch, which is the core technology for next-generation ROADM. By introducing a computer-generated hologram instead of general grating patterns to control the LCOS device, we contribute to building a more efficient wavelength selective switch. With the use of phase modulation properties of LCOS devices, we designed the hologram for five-port output and a 40-channel wavelength selective switch. We applied a multi-level phase modulation technique with the Gerchberg-Saxton algorithm to produce the hologram, which is easily scalable to any different type of wavelength selective switch. With an experimental setup, we verified the usability of the hologram designed for five-port output. We also suggest a hologram design technique for beam control of a 40-channel wavelength selective switch.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.5
• /
• pp.21-26
• /
• 2014

This paper proposes a frequency reconfigurable antenna which operates at not only LTE but also other currently serviced bands. The high band(1,710-2,170 MHz) performance was satisfied through PIFA structure, and the low band performance through the additional RF Switch by changing the state between SW1 and SW2. When the RF switch is SW1 state, the operation bandwidth is 782-907 MHz (GSM), and 738-861 MHz (LTE) at OFF state. The proposed antenna has a omni-directional radiation pattern and measured peak gains were 0.04-4.68 dBi at the SW1 state and 0.92-1.53 dBi at the SW2 state, respectively. Judging from the results, proposed reconfigurable antenna is expected to be applied to LTE-Advanced mobile terminals since the antenna shows an outstanding performance.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.11 no.6
• /
• pp.732-741
• /
• 2018

In order to maximize the usable capacity of a BMS (battery management system) that uses several battery cells connected in series, a cell balancing technique that equips each cell with the same voltage is needed. In the active cell balancing circuit using a multi-winding transformer, a balancing circuit that transfers energy directly to the cell (cell-to-cell) is composed of a PMOS switch and a gate driving chip for driving the NMOS switch. The TLP2748 photocoupler and the TLP2745 photocoupler are required, resulting in increased cost and reduced integration. In this paper, instead of driving PMOS and NMOS switching devices by using photocoupler, we proposed 70V BCD process based PMOS gate driving circuit, NMOS gate driving circuit, PMOS gate driving circuit and NMOS gate driving circuit with improved switching time. ${\Delta}t$ of the PMOS gate drive switch with improved switching time was 8.9 ns and ${\Delta}t$ of the NMOS gate drive switch was 9.9 ns.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.14 no.3
• /
• pp.6-14
• /
• 2000

The high efficiency multi-resonant converter(MRC) is capable of operating at a high frequency because the losses are decreased due to the resonant tank circuit. Such a few MHz high frequency applications provide high power density[W/inch3] of the converter. However, the resonant voltage stress across the switch of the resonant tank circuit is 4∼5 times input voltage. This high voltage stress increases the conduction losses because of on-resistance of a MOSFET with higher rating. In this paper, the modeling analysis for the AT Forward MRC suggested to solve the these problems is discusses. The operational modes of the AT Forward MRC are divided to 8 equivalent modes according to the two switching sequences. Each mode analysis is covered using the equivalent circuits modeled over all of the paper. The operational principle of the resonant converter was verified through the experimental converter with 48[V] input voltage, 5[V]/50[W] output voltage/power and PSpice simulation. The measured maximum voltage, 5[V]/50[W] output voltage/power and PSpice simulation. The measure maximum voltage stress is 170[V] of 2.9 times the input voltage and the maximum efficiency is measured to 81.66%.