• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.105-117
• /
• 2015

In this paper, we consider 19 cells with the two tiers for polar-rectangular coordinates (PRCs) and provide the cell edge performance of cellular networks based on distance from cell center i.e., BS (base station). When FFR is applied(or adopted) to cell edge, it is expected that BS cooperation, or a coordinated multipoint (CoMP) multiple access strategy will further improve the system performance. We proposed a new method to evaluate the sum rate capacity of the MIMO DC of multicell system. We improve the performance of cell edge users for intercell interference cancelation in cooperative downlink multicell systems. Simulation results show that the proposed scheme outperforms the reference schemes, in terms of cell edge SINR (signal-to-interference-noise ratio) with a minimal impact on the network path loss exponent. We show 13 dB improvements in cell-edge SINR by using reuse of three relative to reuse of one. BS cooperation has been proposed to mitigate the cell edge effect.

• Journal of Aerospace System Engineering
• /
• v.13 no.2
• /
• pp.51-59
• /
• 2019

Subsequently, Part I [1], which was about the single-cell model, a composite thin-walled beam with a multi-cell of chord-wise asymmetric cross-section, was selected in this study. Moreover, the theoretical dynamic characteristics of the model were analyzed. For this analysis, mathematical modeling was performed by considering the warping restraint effects, transverse shear effects, taper ratio and cross-section ratio. Similar to part I, the mass, stiffness coefficients and Eigen frequencies of the multi-cell section considered were investigated. In particular, the comparison between the multi-cell and single-cell sections and the effects of the cross-section ratio and taper ratio of the model on the Eigen frequencies were analyzed. However, the results compared when the asymmetry of the section was considered and warping function were not corrected.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.2
• /
• pp.32-39
• /
• 2010

Conventional cell characterization does not consider Multiple Input Switching(MIS). Since the impact of MIS on gate delay variation is large, it is not possible to predict the accurate gate delay with the conventional cell characterization. We observed the maximum 46% difference in gate delay due tn MIS. In this paper, we propose a gate delay model considering the delay variation caused by the temporal proximity of MIS. The proposed model calculates the delay variation using the Radial Basis Function. The experimental results show that the proposed method can more accurately predict the gate delay when MIS occurs.

• Electronics and Telecommunications Trends
• /
• v.27 no.2
• /
• pp.21-30
• /
• 2012

스마트폰의 대중화와 더불어 모바일 데이터 트래픽은 폭발적인 증가 추세에 있다. 이와 같은 트래픽 요구에 부합하도록 시스템 측면에서 주파수 사용 효율을 높이는 다양한 많은 기술들이 제안되고 있다. 또 한편에서는 사용자들 측면에서 사용자의 채널 환경에 변함 없이 일정한 체감 품질을 유지하는 기술에 대한 제안도 되고 있다. 본고에서는 최근 주목받고 있는 셀 간 간섭으로 저하되는 무선 이동통신의 품질을 다중 셀 간의 협력을 통해 해결하는 MCP (multi-cell processing)에 대한 전반적인 연구동향 등을 소개한다. MCP를 위한 방법들에 대한 고찰과 이론적 모델 및 이를 위한 기술적 과제 등에 대한 논의도 소개한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.23 no.8
• /
• pp.1899-1906
• /
• 1998

In ATM switching system link bandwidth is one of the improtant resources. Thus ATM switching system must allocate the bandwidth to the users efficiently and guarantee the QoS. Especially to guarantee the QoS of the VBR traffic source such as video, users must declare the traffic characteristics and QoS expectations using UPC parameters. The CAC can use two multiplexig models in variation to link capacity and connection number. One is loseless multiplexing model; the second is a statistical multiplexing model. The loseless multiplexing model performs best when the number of mutiplexed sources is small, but as the number of multiplexed sources is increase the CAC must use the statistical multiplexing model. In this paper, the statistical multiplexing models are studied, which are suitable for high capacity ATM link on VBR traffic sources. The satistical multiplexing model and the loseless multiplexing model are combined. In statistical model we map the UPC parameters provided by new VBR connection to appropriate source traffic model. In the high capacity ATM link, as the connection number increases, the statical multiplexing gain increases.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.1
• /
• pp.113-122
• /
• 2007

In this paper, we propose a multi-state based hybrid location update scheme, which integrates the time-based and the movement-based methods. In the proposed scheme, a mobile terminal updates its location after n cell boundary crossing and a time interval of T[sec]. We derive an analytical solution for the performance of the hybrid scheme with exponential cell resident time and evaluate it numerically with time-varying random walk mobility model, which we model as multi-states Markov chain. Furthermore, we also evaluate the scheme for arbitrary cell resident times by simulation. From the numerical analysis and the simulation results, we prove that the proposed scheme significantly outperforms the time-based and the movement-based methods, when implemented alone, more accurately adapting to the time-varying user mobility.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.1-8
• /
• 2019

In this paper, the electrical characteristics with various C-rates are tested with a high power series battery pack comprised of 18650 cylindrical nickel cobalt aluminum(NCA) lithium-ion battery. The electrical characteristics of discharge capacity test with 14S1P battery pack and electric vehicle (EV) cycle test with 4S1P battery pack are compared and analyzed by the various of C-rates. Multiple linear regression is used to estimate voltage imbalance of 14S1P and 4S1P battery packs with various C-rates based on experimental data. The estimation accuracy is evaluated by root mean square error(RMSE) to validate multiple linear regression. The result of this paper is contributed that to use for estimating the voltage imbalance of discharge capacity test with 14S1P battery pack using multiple linear regression better than to use the voltage imbalance of EV cycle with 4S1P battery pack.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.07a
• /
• pp.96-97
• /
• 2010

다중 홉 중계기술은 차세대 무선통신을 위한 핵심 기술로 최근 전 세계적으로 활발히 연구되고 있으며, 셀 용량 증대, 셀영역 확장, 음영지역 축소 등의 장점으로 인하여, IEEE 802.11s, 802.15.4, 802.16j 등의 표준화에의 반영을 위한 논의가 활발히 진행되고 있다. 본 논문에서는 간섭신호가 존재하지 않는 이상적 네트워크 환경을 고려한 기존 연구의 한계를 극복하기 위해, 다중 간섭신호가 존재하는 레일레이(Rayleigh) 페이딩 채널에서 이중 홉(dual-hop) 복호후재전송(DF : decode-and-forward) 중계시스템의 시스템 모델을 제안하고, 모의실험을 통하여 불능확률 및 4진 직교 진폭 변조(4-QAM)를 위한 평균비트오율 (average bit error rate) 성능을 살펴본다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.4
• /
• pp.809-816
• /
• 2010

This paper proposed about a load-balanced multi-agent model in mobile distribution environment to monitor moving patients and to deal with a situation of emergency. This model was designed to have a structure based on distribution framework by expanding a mobile system, and provides healthcare services based on real time situational information on moving patients. In order to overcome the limitation of middleware when we design system, we provided an abstract layer between applications and their base network infrastructure so that balance between QoS requests and network life can be maintained. In addition, clustering was used in cells for the efficient load distribution among multi-agents. By using Clustering FCM, we got optimal resources and had solve about transmission delay.

• Journal of the Korea Society of Computer and Information
• /
• v.5 no.4
• /
• pp.82-89
• /
• 2000

This study analyzes the cell loss probability of an ATM multiplexer with real time and non-real time bursty traffics. It is assumed that an ATM multiplexer with loss priority control for the analysis. The loss priority control uses the CLP Reld of cell header. For easy analysis and less computation. the multiplexed traffic of the ATM multiplexer was modeled by the MMDP. The ATM multiplexer is simulated by the MMDP/MMDP/l/K queueing system. From the above results, The connection admission of an ATM multiplexer with loss priority control is determined by the cell loss probability with low priority as well as the size of threshold buffer. Therefore, to increase the statistical multiplexing gain it will be good to utilize the loss priority control in order.