• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2001년도 전력전자학술대회 논문집
• /
• pp.260-263
• /
• 2001

In this paper, we experimentally considered the stability of AT forward MRC with the characteristics of high efficiency and high power density. The converter ratings are input 48V, output 5V/50W, The maximum voltage stress is measured to about 170V of 2 times the input voltage when the input is 58V. The $81.66\%$ of maximum efficiency could be obtained. For the stability of the converter, it is compensated through the error op amp in MC34067. A phase margin and a gain margin for relative stability are measured using HP4194A network analyzer.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 학술대회 논문집 전문대학교육위원
• /
• pp.38-40
• /
• 2002

In the case of conventional high frequency inverter, with damage of switch by surge voltage when switch gets into compulsion extinction by load accident and so on because reactor is connected by series to switch, or there was problem of conduction loss by reactor's resistivity component, Also, it has controversial point of that can not ignore conduction loss of switch in complete work kind action of soft switching. In this paper, as high frequency induction heating power supply, we propose half bridge type multi resonance soft switching high frequency inverter topology that can realize high amplitude operation of load current with controlling switch current by multiplex resonance, mitigating surge voltage when switch gets into compulsion extinction and to be complete operation of zero current switching by opposit parallel connected reactor to inverter switch. and do circuit analysis for choice of most suitable circuit parameter of circuit

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2014년도 전력전자학술대회 논문집
• /
• pp.323-324
• /
• 2014

A higher-order power converter topology for an extremely low coupling (less than 0.15) transformer with high efficiency and wide air-gap (23 mm) is presented in this paper. Among the typical resonant converter topologies for contact-less power transferring systems, Series-Series Resonant Converter (SSRC) and Series-Parallel Resonant Converter (SPRC) are widely used in number of power electronic applications. However, when coupling coefficient of a transformer is seriously low (k<0.5), the series-series resonant converter will possibly operate at short circuited condition because of the small magnetizing impedance. To solve this problem, a modified and improved topology of seventh-order resonant converter for contact-less power converter system is proposed and the results are presented.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2015년도 전력전자학술대회 논문집
• /
• pp.265-266
• /
• 2015

A multiple output dc-dc resonant converter topology for an independent voltage control technique is proposed, using a narrow frequency selection band-pass filters. The multi-output converter is supplied by a single source inverter with the superposed sinusoidal signals reserved for each output. A series-series parallel resonant topology is utilized to implement the narrow frequency selection channels for minimum interference. Finally the experimental setup for four output dc-dc converter is verified with the narrow channel frequencies of 26 kHz, 32 kHz, 38 kHz and 46 kHz.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1380-1382
• /
• 2005

The multi-resonant converter minimizes a parasitic oscillation by using the resonant tank circuit absorbed parasitic reactance existing in a converter circuit. So it is possible that the converter operated at a high frequency has a high efficiency because the losses are reduced. However, the resonant voltage stress across a switch is four or five times a input voltage. This high voltage stress increases the conduction loss. In this paper, we proposed the AT flyback multi-resonant converter. The proposed converter can reduce the voltage stress to two or three times by using two series input capacitors. The operational principle of the proposed converter was verified through the experimental converter.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제23회 추계학술대회 논문집
• /
• pp.229-234
• /
• 2004

The objective of the present study is to conduct model combustion tests for double swirl coaxial injectors to identify their combustion stability characteristics. Gaseous oxygen and mixture of methane and propane have been used as simulant propellants. Two model chambers tuned to the If acoustic resonance mode of a full-scale thrust chamber were manufactured to be used as a combustion cylinder. The main idea of the experiment is that the mixing mechanism is considered as a dominant factor significantly affecting combustion instability in a full-scale thrust chamber. Self-excited dynamic pressure values in a model chamber show different combustion stability zones with respect to a recess number. Upon test results, couplings between combustion conditions and the IT acoustic resonance mode become strengthened with the increase of a recess length.

• 한국광학회지
• /
• 제14권3호
• /
• pp.286-291
• /
• 2003

광대역 이득 특성을 얻기 위한 InGaAsP-InP 응력보상 비대칭 다중 양자우물(Asymmetric Multiple Quantum Well, AMQW) 구조를 성장하고, Ridge Waveguide Laser Diodes(RWG-LDs)를 제작하였다. 제작 후 소자의 동작변수와 모드 이득을 측정하였으며, 얻어진 결과를 비교, 분석하였다. 외부 공진기형 구조에서 넓고 평탄한 이득특성을 얻기 위해 한쪽 단면에 Anti-Reflection(AR) 코팅을 수행하여 AR coated AMQW RWG LD의 이득특성을 분석하였다.

• 전력전자학회논문지
• /
• 제26권4호
• /
• pp.249-255
• /
• 2021

A novel current balancing technique for multichannel light-emitting diode (LED) that uses a series resonance and coupled inductor is proposed in this paper. The proposed LED driver balances output currents through frequency control and enables zero-voltage switching. The proposed converter utilizes the charge balance condition of the resonant capacitor and the current sharing function of the coupled inductor to achieve whole LED current balancing without an additional controller. The proposed coupled inductor can integrate the current balancing function and the resonant inductor, so the power density can be increased by reducing the number of magnetic devices. A 40 W prototype is built to verify the validity of this LED driver, and the experimental results are successfully obtained.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2020년도 전력전자학술대회
• /
• pp.457-458
• /
• 2020

본 논문은 저전압 직류배전 (LVDC)이 도입된 공장 및 물류센터 등 에서 다수의 전동 지게차를 운용할 때, 효과적으로 충전할 수 있는 지게차 배터리 충전기를 제안하였다. 제안하는 충전기는 SiC 반도체 및 의도적으로 비대칭으로 설계한 공진 인덕터를 사용한 두 개의 위상천이 풀브릿지 컨버터로 구성된다. 이를 통하여 최대 200A급 고속 충전 및 다종의 배터리 규격 (48V, 80V) 대응과 함께 고효율, 고전력밀도를 달성 하였다.

• 한국정보통신학회논문지
• /
• 제20권9호
• /
• pp.1633-1640
• /
• 2016

본 논문에서는 WLAN 대역에서 동작하는 오픈된 사각 모양의 마이크로스트립패치 안테나를 제안하였다. 제안된 안테나는 단일 공진 또는 다중 공진 주파수를 가변하여 유효 대역폭을 가지고 있으며 WLAN대역(2.4 - 2.484, 5.15 - 5.35, 5.25-5.825 GHz)을 만족하는 마이크로 스트립 선로를 갖는 평면형 모노폴 구조로 설계된다. 안테나는 FR-4 기판에 제작되었고 두께는 0.8 mm이다. 안테나의 동작모드와 재구성 특성을 분석하기 위해 전류분포와 전자계 분포를 분석하기 위해 상용 툴을 사용하였다. 최적화된 수치를 얻기 위해 각 패치의 길이에 따른 시뮬레이션 반사손실을 비교하였다. 최적화된 수치를 사용하여 스위치가 off 되었을 때 WLAN 밴드 (2.380 - 2.710 GHz)을 얻었으며, 스위치가 on 되었을 때 2.4 GHz 밴드 (2.380 - 2.710 GHz)을 얻었다. 제작 및 측정결과로부터 제안된 안테나의 반사손실 특성, 측정된 이득과 방사패턴 특성 결과를 얻었다.