• Journal of Advanced Navigation Technology
• /
• 제23권6호
• /
• pp.548-553
• /
• 2019

Along with advanced vehicle to vehicle (V2V) communication technologies, platooning is regarded as one of the most promising form of autonomous driving solutions in order to increase road capacity. In this paper, we propose a novel V2V transmission scheme for safety message dissemination in platooning. The proposed scheme enhances the efficiency of channel access and multi-vehicle orthogonal frequency division multiple access (OFDMA) transmission by taking advantage of triggered uplink access technique and null data packet feedback report protocol introduced in the sixth generation WLAN standard, IEEE 802.11ax. The simulation results prove that the proposed scheme outperforms the conventional IEEE 802.11 transmission scheme throughout all measured vehicle density range.

• Journal of KIISE:Information Networking
• /
• 제31권3호
• /
• pp.280-288
• /
• 2004

In Ad Hoc Networks, a connection breaks due to the irregular movement of mobile nodes and the inherent characteristics of the wireless medium such as the interference and the multi-path fading. AODV, a typical on-demand routing protocol in Ad Hoc networks, uses the local repair mechanism to cope with the connection breaks. This paper proposes an efficient route maintenance scheme for AODV, named as AODV-ERM, by utilizing hello messages. The proposed AODV-ERM scheme can recover some link breaks efficiently without relying on the expensive local repair process, thereby reducing the repair time. To show the effectiveness of the proposed scheme, we performed extensive simulation with NS2. The simulation results show that the proposed scheme can reduce the repair time effectively and thus, increase the overall packet delivery ratio.

• Journal of the Institute of Convergence Signal Processing
• /
• 제15권2호
• /
• pp.64-69
• /
• 2014

Ultrasound system is one of the complex wireless signal processing systems that are widely used in the fields of modern industry such as medical diagnostics, underwater communications, and sensor-networks. Miniaturization of ultrasound system has been raging recently. In this paper, a hybrid LNA that is suitable for miniaturization and mobile diagnostic ultrasound system has been developed. The proposed LNA has low noise figure of less than 5dB, and the feedback resistor is designed to be electrically adjusted in order to attain the impedance-matching for various ultrasound transducers. It supports the whole ultrasound frequencies from 10KHz to 150MHz frequency band and also provides sleep modes. A gain from -18.8 to -29.5 dB is achieved by adjusting each transducer to fit the system character. Power consumption can be reduced up to 90% in similar performance as compared to the existing LNA.

• Journal of KIISE:Information Networking
• /
• 제33권5호
• /
• pp.369-379
• /
• 2006

In recent years, there have been many researches about Ad-hoc Networks which is available to communicate freely between mobile devices by using multi-hop without any support of relay base or access point. TCP that used the most widely transport protocol in the Internet repeats packet loss and retransmission because it increases congestion window size by using reactive congestion control until packet loss occurs. As a result of this, energy of mobile device is wasted unnecessarily. In this paper, we propose TCP-New Veno in order to improve the energy efficiency of mobile device. According to the state of network, the scheme adjusts appropriate size of congestion window. Therefore, the energy efficiency of mobile device and utilization of bandwidth are improved by the scheme. From the simulation by using ns-2, we could see more improved energy efficiency with TCP-New Veno than those with TCP in Ad-hoc Networks.

• Journal of the Institute of Convergence Signal Processing
• /
• 제11권3호
• /
• pp.197-202
• /
• 2010

In this paper, multi-channel vital signal monitoring system was implemented for home healthcare. The system able to measure vital signal for example ECG, PPG and temperature simultaneously at patients’ home. The vital signal is an essential parameter for healthcare application and can be easily extracted from patients. The implemented system consist of sensor parts for signal extraction, signal amplifier and filter for analog circuit, analog signal to digital conversion for controlling devices and lastly the monitoring program. The system able to transmit vital signals using Bluetooth wireless communications to personal computer or home server. And the tele-monitoring system able to display real-time signals using web monitoring program. In medical application, the vital signal parameter able to stored and saved in the web server for further medical analysis. This system opens up the possibilities of ubiquitous healthcare where further implementation can be easily done.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제26권8호
• /
• pp.748-757
• /
• 2015

MIMO systems utilizing multiple antenna transmission and reception is one of the key technologies to enhance the capacity of 5G wireless communications. In order to obtain an appropriate performance evaluation of MIMO techniques, the usage of wireless channel model reflecting spatial channel characteristics is required, such as the 3-dimensional spatial channel model(3D SCM) proposed by 3GPP TR36.873 documentation. In this paper, we implement and verify the channel simulation environment based on 3D SCM, to present and compare the characteristics of UMi and UMa environments. We also apply MIMO transmission to the UMa scenario to investigate the channel correlation among antenna elements with different array distances and to identify the corresponding throughput changes. By evaluating the channel power correlations for randomly distributed users within the sector for different horizontal and vertical antenna distances, we present the statistical characteristics which determine the transmission performance under the SCM environment.

• The Journal of the Korea Contents Association
• /
• 제13권7호
• /
• pp.1-8
• /
• 2013

As yet the use of 3D projection mapping facade has been limited to advertising and performance in the outside. And interactive elements are lacking. In this paper, propose a interaction system which control of projection mapping facade for multi-audience participation using smart devices. The system can be interaction for the multi-façade. And single or multiple can participate in the game. A user test based on the result confirmed an effectiveness of the proposed method. This research showed a practical method in which interaction of projection facade system can be used to user devices. The results of this study can be used as a base module for projection facade interaction system. In addition, It can be utilized for converged content development such as performances, games, education and various applications services.

• Journal of Advanced Marine Engineering and Technology
• /
• 제40권9호
• /
• pp.818-823
• /
• 2016

Millimeter wave (mm-wave) communication systems provide high data rates owing to the large bandwidths available at mm-wave frequencies. Recently, analogue and digital combined beamforming, namely "hybrid beamforming" has drawn attentions owing to its ability to realize the required link margins in mm-wave systems. Taking into account the radio frequency (RF) hardware limitations, such as the analogue phase shifter gain constraint and the low resolution of the phase controller, we introduce an uplink hybrid beamforming system that includes discrete Fourier transform (DFT) based "fixed" analogue beamforming. We adopt a zero-forcing (ZF) multiple-input multiple-output (MIMO) equalizer to eliminate the uplink inter-user interferences. Moreover, to improve the sum-rate performances, we propose a transmit beam selection algorithm which makes the uplink effective channels, i.e., the beamformed channels, become near orthogonal. The effectiveness of the proposed beam selection algorithm was verified through numerical simulations.

• Journal of the Korea Society for Simulation
• /
• 제20권4호
• /
• pp.157-166
• /
• 2011

As underwater environment monitoring system's interest has increased, the research is proceeding about underwater acoustic sensor network. Underwater sensor network can be applicable to many fields, such as underwater environment monitoring, underwater resource exploration, oceanic data collection, military purposes, etc. It is essential to define the PHY-MAC protocol for revitalization of the underwater acoustic sensor network which is available utilization in a variety of fields. However, underwater acoustic sensor network has to implement by consideration of underwater environmental characteristics, such as limited bandwidth, multi-path, fading, long propagation delay caused by low acoustic speed. In this paper, we define frequency of adjusted PHY protocol, network topology, MAC protocol, PHY-MAC interface, data frame format by consideration of underwater environmental characteristics. We also present system configuration of our implementation and evaluate performance based on our implementation with test in real underwater field.

• Journal of KIISE:Information Networking
• /
• 제29권4호
• /
• pp.386-396
• /
• 2002

This paper presents a neural network-based near-optimal routing algorithm. It employs a modified Hopfield Neural Network (MHNN) as a means to solve the shortest path problem. It uses every piece of information that is available at the peripheral neurons in addition to the highly correlated information that is available at the local neuron. Consequently, every neuron converges speedily and optimally to a stable state. The convergence is faster than what is usually found in algorithms that employ conventional Hopfield neural networks. Computer simulations support the indicated claims. The results are relatively independent of network topology for almost all source-destination pairs, which nay be useful for implementing the routing algorithms appropriate to multi -hop packet radio networks with time-varying network topology.