• The Journal of the Acoustical Society of Korea
• /
• v.17 no.3
• /
• pp.37-46
• /
• 1998

본 연구에서는 압전 세라믹인 PZT를 이용하여 두께 진동모드의 다중모드 필터를 설계, 제작하였다. 다중모드 세라믹필터의 등가회로를 설계하였고, 이를 이용하여 설계변수 인 물성변수와 형상변수에 따른 필터전달특성의 경향을 분석하였다. 이를 바탕으로 10.7MHz의 중심주파수를 가지는 세라믹필터를 제작하였고, 설계변수 중에서 압전세라믹 기 판과 전극형상의 변화에 따른 필터의 전달특성의 변화를 실험적으로 검증하였다. 본 연구를 통한 경향분석결과는 다양한 진동모드와 다양한 주파수대를 가지는 다중모드 필터를 설계하 는데 있어서 유용한 도구로 사용될 수 있을 것이다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.1
• /
• pp.47-52
• /
• 2011

In this paper, to evaluate the design properties of 3D optical multimode interference (MMI) couplers with ultracompact width, modal transmission line theory and effective dielectric method are combined with together. A coupling efficiency based on the composed approach is defined, and the coupling length is numerically determined for the design of 3 dB coupler, cross coupler and bar coupler. The simulation result shows that the designed MMI coupler has a low insertion loss and a high splitting ratio.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.47 no.1
• /
• pp.14-19
• /
• 2010

In this paper, a novel architecture for device miniaturization of multimode interference-based couplers (MMICs) is proposed by replacing conventionally designed MMICs by cascaded two-section stepped-width or stepped-index MMICs. For the 82% cross coupling efficiency in a stepped-width MMIC, the coupling length of device results in just 6.7% length reduction. However, for a stepped-width and stepped-index MMIC, the coupling efficiency increases to 93% and the length reduction of 9% occurs. Furthermore, with additional incorporation of tapered devices, it shows that a compact MMIC can be designed in which the coupling efficiency is 90% and the length is reduced to 25%.

• Proceedings of the Optical Society of Korea Conference
• /
• 2002.07a
• /
• pp.190-191
• /
• 2002

광소자 설계 시 TE/TM 분극에 대한 민감도는 매우 중요한 요소로 작용을 한다. 이러한 민감도를 줄이기 위해 많은 광소자에 다중모드 간섭기가 이용되고 있다. 다중모드 간섭기에 입력되는 신호는 TE와 TM 두 모드의 분극으로 이루어져 있으며, 각각은 도파로 내에 존재하는 모드에 실려 50：50의 파워 분배를 가지고 진행하게 된다. 그러므로 광소자를 제작하기 위해 TE 또는 TM 모드만을 고려하는 것은 소자의 효율을 떨어뜨리는 요인으로 작용한다. (중략)

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.4
• /
• pp.47-52
• /
• 2011

Nano-scale power splitter based on Si plasmonic waveguides are designed by utilizing the multimode interference (MMI) coupler. Effective dielectric method and longitudinal modal transmission-line theory are used for simulating the light propagation and optimizing the structural parameters at 3-D guiding geometry. The designed $1{\times}2$ 50:50 MMI power splitter has a nano-scale size of only $800nm{\times}850nm$. In order to achieve a variable power splitting ratio, a $2{\times}2$ MMI coupler is designed and the corresponding power splitting ratio can be tuned in the range of 78.5%:15.5%~5.5%:86.6%. Also, it is shown that it has a large bandwidth of $1.5{\mu}m{\sim}1.7{\mu}m$. In this range, the transmission is over 0.8.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.49 no.4
• /
• pp.34-42
• /
• 2012

In this paper, a wide-input range CMOS multi-mode rectifier for wireless power transfer system is presented. The output voltage of multi-mode rectifier is sensed by comparator and switches are controlled based on it. The mode of multi-mode rectifier is automatically selected by the switches among full-wave rectifier, 1-stage voltage multiplier and 2-stage voltage multiplier. In full-wave rectifier mode, the rectified output DC voltage ranges from 9 V to 19 V for a input AC voltage from 10 V to 20 V. However, the input-range of the multi-mode rectifier is more improved than that of the conventional full-wave rectifier by 5V, so the rectified output DC voltage ranges from 7.5 V to 19 V for a input AC voltage from 5 V to 20 V. The power conversion efficiency of the multi-mode rectifier is 94 % in full-wave rectifier mode. The proposed multi-mode rectifier is fabricated in a $0.35{\mu}m$ CMOS process with an active area of $2500{\mu}m{\times}1750{\mu}m$.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.184-188
• /
• 2001

본 논문에서는 다중대역 피드를 위한 직교모드 변환기를 설계하였다. 직교모드 변환기의 전체적인 모양은 사각 테이퍼진 형태이고, 18-20 GHz 에서 우원 편파와 좌원편파를 발생시키기 위해 테이퍼 부분에 2개의 측면포트를 두고, 직선포트는 30-45 GHz의 광대역에서 -20dB 이하의 반사계수를 가지도록 설계하였다. 직선포트에서의 반사계수 특성을 향상시키기 위해서 측면포트에 얇은 격막을 삽입하였다. 전체적인 설계에 상용소프트웨어인 HFSS$^{R}$를 사용하였다.

• Korean Journal of Optics and Photonics
• /
• v.18 no.5
• /
• pp.295-302
• /
• 2007

This paper presents a rigorous comparison of the design characteristics of polarization-insensitive directional coupler (DC) and multimode interference (MMI) coupler based on rib type waveguides, by using longitudinal modal transmission-line theory (L-MTLT). It shows that the multimode mixing and interference property of MMI can be structurally designed through the continuous evolution of the two-mode coupling property of DC. It also compares and analyzes the coupling efficiency along with the coupling length and the wavelength between polarization-insensitive DC and MMI. From the design properties obtained, it demonstrates for the first time the integration of polarization-insensitive DC or MMI with a Bragg grating and evaluates precisely the filtering characteristics. The numerical results reveal that the DC, as long as it is designed to have the same coupling length for TE and TM modes, has better performance than the MMI in polarization-insensitive filtering behaviour. However, it shows that the MMI with much less coupling length than DC is preferred in the miniaturization of integrated devices.

• Journal of IKEEE
• /
• v.24 no.2
• /
• pp.409-418
• /
• 2020

In this paper, an integrated optical, evanescent-wave biosensor utilizing a multimode interferometer based on a Si₃N₄ rib-optical waveguide consisting of the Si/SiO₂/Si₃N₄/SiO₂ stacked structure was described. The theoretical background of the multimode interferometer was reviewed, and the structure and design process were presented through numerical computational analysis. We analyzed how the dimension (length, width) of the multimode interferometer affected the sensor performance. It has been confirmed through computational analysis that the changes in the refractive index of an analyte greatly affect the mode pattern formation position and output optical power of a multimode interferometer, and proved that this principle could be applied to integrated-optic biosensor.

• Proceedings of the Acoustical Society of Korea Conference
• /
• 1985.10a
• /
• pp.31-36
• /
• 1985

본 논문에서는 그레이더드인덱스 다중모드 광섬유에 압력을 가함으로써 발생되는 마이크로벤딩을 모드 결합 이론으로 분석하고, 그 이론에 의해 모드결합이 최적으로 일어나는 정적벤딩을 통한 주기성을 얻어 시제품 광섬유 음향 트렌스튜서를 설계 및 그것을 이용한 광섬유음향센서를 제작하였다. 제작된 트랜스튜서의 탐지가능한 최소검출압력을 정적벤딩 실험을 통하여 계산하였으며 아울러 제작된 광섬유음향트랜스듀서의 특성을 실험하였다.