• Geophysics and Geophysical Exploration
• /
• v.8 no.1
• /
• pp.26-33
• /
• 2005

Inversion of multi-mode surface-wave phase velocity for shallow engineering site investigation has received much attention in recent years. A sensitivity analysis and inversion of both synthetic and field data demonstrates the greater effectiveness of this method over employing the fundamental mode alone. Perturbation of thickness and shear-wave velocity parameters in multi-modal Rayleigh wave phase velocities revealed that the sensitivities of higher modes: (a) concentrate in different frequency bands, and (b) are greater than the fundamental mode for deeper parameters. These observations suggest that multi-mode phase velocity inversion can provide better parameter discrimination and imaging of deep structure, especially with a velocity reversal, than can inversion of fundamental mode data alone. An inversion of the theoretical phase velocities in a model with a low velocity layer at 20 m depth can only image the soft layer when the first higher mode is incorporated. This is especially important when the lowest measurable frequency is only 6 Hz. Field tests were conducted at sites surveyed by borehole and PS logging. At the first site, an array microtremor survey, often used for deep geological surveying in Japan, was used to survey the soil down to 35 m depth. At the second site, linear multichannel spreads with a sledgehammer source were recorded, for an investigation down to 12 m depth. The f-k power spectrum method was applied for dispersion analysis, and velocities up to the second higher mode were observed in each test. The multi-mode inversion results agree well with PS logs, but models estimated from the fundamental mode alone show f large underestimation of the depth to shallow soft layers below artificial fill.

• Korean Journal of Optics and Photonics
• /
• v.18 no.1
• /
• pp.56-65
• /
• 2007

The effect of gain dispersion on the self-pulsation (SP) characteristics due to the mode beating of two modes emitted in a multisection DFB laser composed of two complex-coupled DFB sections and a phase control section is investigated. When the peak wavelength, ${\lambda}_{p}$, of the gain spectrum of the DFB section is positioned in the center of the lasing wavelengths or the Bragg wavelengths of the two DFB sections, the maximum SP frequencies are higher and the modulation index has better characteristics compared to those cases for ${\lambda}_{p}$ fixed at the lasing wavelength or Bragg wavelength of one DFB section, when the difference between the Bragg wavelengths of the two DFB sections, ${\Dalta}{\lambda}_{B}$, is varied. When ${\lambda}_{p}$ is positioned in the renter of the Bragg wavelengths of the two DFB sections, the maximum SP frequency is higher and of the modulation index has better characteristics compared to those of the case for ${\lambda}_{p}$ positioned in the center of the lasing wavelengths of the two DFB sections.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.10
• /
• pp.2293-2302
• /
• 2012

New optical transmission links technique for compensating of the distorted wavelength division multiplexed (WDM) signals due to group velocity dispersion (GVD) and self phase modulation (SPM) in single mode fiber (SMF) are proposed. The proposed optical links have optical phase conjugator (OPC) placed at nearby WDM transmitter or receiver and repeater spans with artificial distribution of SMF length and residual dispersion per span (RDPS). It is confirmed that optimal link configuration expanding effective launching power range and effective net residual dispersion (NRD) by improving system performance is that having OPC closely placed at WDM receiver and the gradually descended distribution of SMF length and RDPS of each repeater spans, related with the gradually increased optical link length. And, it is also confirmed that NRD is controlled by postcompensation in optimal optical link with OPC closely placed at WDM receiver.

• Journal of Advanced Navigation Technology
• /
• v.17 no.1
• /
• pp.16-23
• /
• 2013

The effects of dispersion coefficient of dispersion compensating fiber (DCF) and residual dispersion per span (RDPS) on in the dispersion managed optical links for compensating the distorted 960 Gbps wavelength division multiplexd (WDM) signals due to group velocity dispersion (GVD) and optical nonlinear effects of single mode fiber (SMF) are investigated. It is confirmed that optimal net residual dispersion (NRD), which greatly affects compensating for optical signals, should be induced under the large launch power condition, irrelevant on the considered dispersion coefficient of DCF and RDPS. It is also confirmed that system performances are greatly improved by selecting the very small RDPS and very large dispersion coefficient of DCF.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.351-353
• /
• 2018

The compensation characteristics are investigated as a function of the averaged residual dispersion per span (RDPS), which is different in each half transmission section, in dispersion-managed optical transmission links with a randomly distributed single mode fiber lengths and RDPS.

• Journal of Advanced Navigation Technology
• /
• v.24 no.5
• /
• pp.408-414
• /
• 2020

The method of overcoming the limitation of optical phase conjugator applied into optical long-haul link for transmitting high capacity wavelength division multiplexed (WDM) channels was investigated. The configuration of optical link was based on dispersion-managed link, in which dispersion compensating fiber inserted into each fiber span with single mode fiber, and optical phase conjugator was added into suitable location of link. The maximum number of fiber spans as a function of the launch power of WDM channels in optical link with optical phase conjugator placed at the proposed location was induced and compared for analyzing the compensation performance of the distorted WDM channels. It was confirmed that the more optical phase conjugator depart from the midway of total transmission length, the less the distorted WDM channels was compensated, however, it was also confirmed that the degradation of compensation can be overcome by the suitable value of residual dispersion per span and by the reasonable choice of fiber span controlling total dispersion accumulated in overall transmission link.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.338-339
• /
• 2018

최근 분산전원 시스템 개발로 인해 계통연계 인버터의 사용이 증가해 왔다. 계통연계 인버터의 주요한 역할은 계통연계 환경에서의 안정적인 운전과 계통 사고 시 중요 부하에 대한 연속적인 전력을 공급하기 위한 독립운전에 있다. 각 모드 전환시의 출력전압의 변동성과 과도응답 특성을 개선하기 위해 최근 다중 루프 및 간접 전류 제어 방식이 계통연계 인버터에 적용되었다. 하지만 이러한 제어 방식은 캐패시터 전압 및 인버터 전류의 측정이 요구되어 시스템의 비용 및 복잡성을 증가시키게 된다. 본 논문에서는 이산시간 상태공간에서의 전상태 관측기를 설계하여 무순단 절체 동작 시 제어기가 요구하는 변수를 추정하고 이를 궤환신호로 사용하여 시스템의 설계 비용 및 복잡성을 줄인다. 또한 계통연계 시 계통유입 고조파 전류를 억제하기 위해 일반적으로 사용되는 기존 공진형 제어기의 과도 응답을 개선하기 위해 이산시간에서 슬라이딩 모드와 공진제어기가 결합된 새로운 제어기 구조를 제안한다. 제안된 기법의 타당성은 PSIM 시뮬레이션을 통하여 입증된다.

• Journal of Advanced Navigation Technology
• /
• v.15 no.2
• /
• pp.248-255
• /
• 2011

An investigation has been carried out, by computer simulation, to evaluate the impact of dispersion compensation configurations on 960 Gbps wavelength division multiplexed (WDM) system with optical phase conjugator (OPC). The considered dispersion compensation configurations in this research are conventional one-end type and bi-end type. One-end and bi-end type are made by using one dispersion compensating fiber (DCF) and two DCFs to decrease dispersion accumulated in one single mode fiber (SMF) span, respectively. It is found that bi-end compensation configuration offers the equal performance with that of one-end configuration in WDM system with residual dispersion per span (RDPS) of 400 ps/nm if net residual dispersion (NRD) had to be optimized in each cases.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.40-41
• /
• 2003

(self-focusing)을 이용한 커렌즈 모드록킹(Kerr-lens mode-locking； KLM) 방법을 이용하면 간단한 구조를 갖는 공진기로 100 펨토초(femto=10-13) 미만의 레이저 펄스를 생성할 수 있다. KLM 티타늄사파이어(Ti：sapphire) 레이저의 발달로 10 펨토초 영역의 레이저 펄스를 간단하게 생성할 수 있게 되었으며 특히, 넓은 스펙트럼 폭을 가지는 처프거울(chirped mirror)의 사용과 정확한 분산의 보정을 통한 5 펨토초(800 nm 파장의 두 주기에 해당) 영역의 레이저 펄스 생성도 보고되고 있다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.1
• /
• pp.188-194
• /
• 2011

We analyze transmission performance of radio frequency signal in WDM-ROF (wavelength division multiplexing - radio over fiber) system employing photonic crystal fiber. In a WDM-ROF system employing conventional single-mode fiber, transmission performance of radio frequency signal is analyzed depending on each WDM channel. In this case, each WDM channel experiences power fluctuation of received RF signal in remote node because of double sidebands of the modulated signal and wavelength dependent dispersion of single mode fiber. This RF power fluctuation acts as a design constraint in viewpoint of system design. By employing photonic crystal fiber (PCF) with dispersion compensation characteristics, the transmission performance of RF signal can be improved compared with the case with SMF only.