• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.844-845
• /
• 2011

스피리컬 전동기의 적용대상인 기존의 다자유도 시스템은 다수의 전동기를 동시에 제어해야 하므로 제어성과 전력공급면에서 단점을 갖는다. 하나의 전동기로 다 자유도 시스템을 구현할 수 있는 스피리컬 전동기는 출력 밀도 측면에서 영구자석을 이용한 형태의 연구가 주로 진행되고 있는데, 세계적으로 기초연구 단계에 있다. 스피리컬 영구자석형 전동기를 구현하기 위해서는 회전자를 지지하면서 3자유도 구현이 가능한 구조적인 설계, 3자유도의 전동력의 발생 메커니즘 설계, 3차원 전자장 해석 및 제어알고리즘 구현이 필요하다. 회전축이 기울여진 상황에서 회전자계를 발생시키는 식이 보고되고 있으나 회전형 전동기와 달리 공증된 회전자계 식이 없는 상황이다. 본 연구에서는 전류벡터를 이용한 회전자계 식에 대한 연구를 진행하였다.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.9
• /
• pp.1385-1391
• /
• 2017

This work presents a synchronized on-line trajectory generation algorithm for mechanical system with multiple degrees-of-freedom. Proposed algorithm is designed to generate time-optimized trajectories and synchronized trajectories under the constraints such as maximum speed, acceleration, deceleration, non-zero initial velocity, etc. Also, because of small computation time, therefore this can be applied in real-time and it is easier to change the trajectory when an event occurs. We verified the feasibility through various trajectory generation.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2007.11a
• /
• pp.464-468
• /
• 2007

In cognitive radio systems, secondary users, unlicensed users, can use primary users' spectrum to increase spectrum efficiency. At that time, the systems must satisfy primary users' QoS. When secondary users use cognitive radio systems, secondary users communication can be terminated, because of satisfying primary users' QoS. However, secondary users' communication terminating is not good for both secondary users and whole systems. So, cognitive radio systems need an efficient algorithm for secondary users of admission control and keeping connections. In this paper, we present an algorithm which consist of two part, admission control and connections control.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.5
• /
• pp.21-28
• /
• 2006

Vibration of a non-linear system with multiple degrees of freedom under random parametric excitations was evaluated by probabilistic method. The non-linear characteristic terms of system structure were quasi-linearized and excitation terms were remained as they were. An analytical method where the expectation values of square mean of error was minimized was used. The numerical results were compared with those obtained by Monte Carlo simulation. A linear congruential generator and Box-Muller method were used in Monte Carlo simulation. The comparison showed the results by probabilistic method agreed well with those by Monte Carlo simulation.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.951-956
• /
• 2007

This paper suggests a high-speed control method which is suitable for multi-joint robots using a real-time stand-alone controller for general-purpose. The fast processing controller consists of a PCI Interface Board and 2-axe PWM drivers. The PCI Interface Board consists of 32-channel PWM output ports, 32-channel Encoder Counters, 32-channel A/D Converters and 48-channel Digital I/O ports, and all the I/O data transmissions are completed within 1ms. And The 2-axe PWM driver can be redesigned easily in order to embed in each link. Experimental implementations show that the high-speed control method can be used for the real-time control which is essential to controlling of multi-body robots such as humanoid robots. Especially, it is efficient for realizing the model-based motion control in demand of much calculation time by the high I/O communication speed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.561-567
• /
• 2007

This paper deals with the numerical model of a bracing-friction damper system and its deployment using the optimal slip load distribution for the seismic retrofitting of a damaged building. The Slotted Bolted Connection (SBC) type friction damper system was tested to investigate its energy dissipation characteristic. Test results coincided with the numerical ones using the conventional model of a bracing-friction damper system. The placement of this device was numerically explored to apply it to the assumed damaged-building and to evaluate its efficiency. It was found by distributing the slip load that minimizes the given performance indicies based on structural response. Numerical results for the damaged building retrofitted with this slip load distribution showed that the seismic design of the bracing-friction damper system under consideration is effective for the structural response reduction.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.8
• /
• pp.851-858
• /
• 2009

In this study, we propose a new input device using vision technology for positioning of multiple DOFs. The input device is composed of multiple Tags on a transparent table and a vision camera below the table. Vision camera detects LEDs at the bottom of each Tag to derive information of the ID, position and orientation. The information are used to determine position and orientation of remote target DOFs. Our developed approach is very reliable and effective, especially when the corresponding DOFs are from many independent individuals. We show an application example with a SCARA robot to prove the flexibility and extendability.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2004.10a
• /
• pp.34-40
• /
• 2004

In this paper, peliminary design procedure of magnetorheological (MR) dampers is developed for controlling the building response induced by seismic excitation. Hysteretic biviscous model which is simple and can describe the hysteretic characteristics of MR damper is used for parametric studies. The capacity of MR damper is determined as a portion of not the building weight but the lateral restoring force. A method is proposed for the optimal placement and number of MR dampers, and its effectiveness is verified by comparing it with the simplified search algorithm. Numerical results indicate that the capacity, number and the placement can be reasonably determined using the proposed design procedure.

• International Commerce and Information Review
• /
• v.11 no.1
• /
• pp.465-484
• /
• 2009

Since the launch of the GATT system, one of the most controversial topics in trade liberalization has been the conflict between culture and trade. The sticking point has been the necessity of cultural exceptions in trade rules. Some countries do not wish to allow further exceptions to basic principles even in cultural industry, while many other countries make their efforts to obtain "cultural safety valve." The latter group asserts that it is indispensable for the protection of cultural identity, whereas the former seems to doubt the truth of the assertion. That is because cultural policy measure possibly constitute a means of arbitrary or unjustifiable discrimination between countries, or a disguised barriers to trade in cultural products. Unfortunately, cultural exceptions still remain unresolved in the WTO, the successor to the GATT. This paper is to review the history and rules of multilateral trading system on cultural industry, address the critical issues to deal with in the DDA negotiations, and lastly provide some perspectives on the appropriate shape of the cultural safety valve.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.828-833
• /
• 2003

Rigid plate elastically supported at the edges is modeled and the performance of the optimal vibration control under sinusoidal excitation is tested. The controller based on the linear quadratic regulator with output feedback is designed to control the multi-degree of freedom vibration. Relative weighting parameters are considered as design constraints to determine the limitation of maximum control force and state parameters. Control force calculated by proportional output feedback of the displacement and velocity is used to suppress the vibration induced by the sinusoidal external force. The active vibration control of vibrating plate by the LQR controller is examined through the numerical simulations that show the effectiveness of optimal control scheme on the three degrees of freedom structure.