• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.5 no.2
• /
• pp.68-73
• /
• 2012

This paper is an analysis the performance of CDMA system using array antenna beamforming technique in wireless channels. Adaptive array beamforming antenna technique combine receive signal amplitude with phase in array antenna element, and can be incremental spatial filter function a direction of arrival signal using weight value. Through simulation, in this paper, we were an analysis to compare bit error rate of forward and backward channels using array antenna beamforming technique in order to interference signal decrease of CDMA fading enviroment. The result simulation, we get spatial diversity effect by using array antenna system, and improved the performance to MAI interference decrease.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39A no.12
• /
• pp.777-779
• /
• 2014

In this paper, we consider IOTA-OFDM/OQAM system that improves the transmission power and rate efficiency of conventional OFDM system and propose DF relaying cooperative communication scheme based on the IOTA-OFDM/OQAM system. In the proposed scheme, the destination receives orthogonal signals from source and relay simultaneously and combines using MRC. We demonstrated that the proposed schemes get better BER performance than conventional system because of the diversity gain.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.6
• /
• pp.63-69
• /
• 2008

In this paper, our goal is to find a power-effective protocol that improves the accuracy of transmission in sensor networks. Therefore we propose a cooperative communication protocol based on MRC(Maximal Ratio Combining) and cyclic code. In our proposal, one sensor node assists two others to communicate with a clusterhead that can get diversity effect and MRC can improve diversity effect also. The proposed protocol with cyclic code can correct error up to 3-bit and reduce decoding complexity compared with convolutional code. Simulation results reveal proposed protocol can save the network energy up to 6dB over single-hop protocol at BER(Bit Error Rate) of $10^{-2}$.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.11A
• /
• pp.1167-1175
• /
• 2006

The ML-DFE(Maximum Likelihood-Decision Feedback Equalization) can be viewed as either a suboptimal signal detection method for reducing hardware complexity of ML or an enhanced detection method for reducing the effect of error propagation of SIC(Successive Interference Cancellation) in spatially multiplexed MIMO systems such as V-BLAST. The ML-DFE can achieve a higher diversity in rich scattering environments as well as reducing the error propagation effect by combing ML decoding with the DFE. In this paper, an MML-DFE(Modified Maximum Likelihood-Decision Feedback Equalization) is proposed to reduce the hardware complexity of the ML-DFE, without compromising performance. It is shown by FPGA implementation that the proposed MML-DFE can achieve the same performance as the ML-DFE with significantly reduced hardware complexity.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.7B
• /
• pp.878-885
• /
• 2011

Due to reflect at surface of the water and limit bandwidth, it is difficult to design underwater acoustic communication systems with high-reliability and high transmission rate. Therefore the trends of underwater communication is transformed from single sensor to multiple sensor studies. However, underwater MIMO communication techniques have a high correlation value between multiple sensors on transmitters and receivers in underwater environments, it is difficult to expect space diversity gain on muli-path channels. Therefore, this paper proposed the MISO communications system with two transmit sensors and single receiver sensor, and analyzed its performance using the LDPC codes and channel compensation algorithm.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.6
• /
• pp.21-28
• /
• 2016

This paper presents a cooperative transmission scheme for underwater acoustic sensor networks to improve packet transmission rate and reduce energy consumption. Source node transmits duplicated information relayed by distributed antennas called a virtual antenna array. Destination node combines that information to reduce packet error rate. The suggested cooperative scheme enhances the reliability by providing high diversity gains through intermediate relay nodes to overcome the distinct characteristics of the underwater channel, such as high transmission loss, propagation delay, and ambient noises. It is suggested that the algorithm select destinations and potential relays from a set of neighboring nodes that utilize distance cost, the residual energy of each node and local measurement of the channel conditions into calculation. Simulation results show that the proposed scheme reduces average energy consumption, response time, and increases packet delivery ratio compared with the SPF(Shortest Path First) and non-cooperative scheme using OPNET Moduler.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.11 s.102
• /
• pp.1147-1154
• /
• 2005

In this paper, we propose some PAPR(Peak to Average Power Ratio) reduction methods using WHT(Walsh Hadamard Transform) to reduce high PAPR generated in OFDM system because of multi carrier modulation. These proposed methods are the methods which has additional PAPR reduction performance without a loss of bandwidth efficiency and a large increment of calculation complexity than common PAPR reduction methods by combining the WHT with some common methods. In this paper, we propose two PAPR reduction methods made by combining a SLM(Selective Mapping) and DSI(Dummy Sequence Insertion) with a WHT. From simulation result, we can find that the PAPR reduction methods using a WHT can get about 1 dB additional PAPR reduction performance than common PAPR reduction methods; they are SLM and DSI. And, because our proposed methods have not only PAPR reduction effect, but also frequency diversity effect, more stabile data transmission is possible in nonlinear HPA and multipath fading channel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.9
• /
• pp.2014-2026
• /
• 1997

In this paper, the performances of wireless asynchronous transfer mode (ATM) cell transmission in mobile work are analyzed. We adopt 16Star QAM as amodulation technique in wireless channel and considered Reed-Solomon, convolutional, and concatenated coding to improve the error rate performances, and also proposed the Partial Concatenated Coding (PCC) technique as UEP(unequal error protection) code for efficient transmission of ATM cell in the air interface. We consider Doppler's effect, Rician fading, and diversity technique of maximal-ratio combining (MRC) for mobile channel model. For performance measure, we analyze bit error rate, ATM cell loss probability, ATM cell error probability, and network performances of ATM cell transmission delay and throughput. The numerical results show that the adoption of PCC is a prospective way for the evolution of future wireless ATM network on mobile environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6A
• /
• pp.519-536
• /
• 2007

In this paper, we combine the Hybrid-Automatic Repeat reQuest (HARQ) algorithm with joint Tx and Rx antenna selection based on the reliability of the individual antennas links. The cyclic redundancy check (CRC) is applied on the data before being encoded using the Turbo encoder. In the receiver the CRC is used to detect errors of each antenna stream and to decide whether a retransmission is required or not. The receiver feeds back the transmitter with the Tx antennas ordering and the acknowledgement of each antenna (ACK or NACK). If the number of ACK antennas is higher than the NACK antennas, then the retransmission takes place from the ACK antennas using the Chase Combining (CC). If the number of the NACK antennas is higher than the ACK antennas then the ACK antennas are used to retransmit the data streams using the CC algorithm and additional NACK antennas are used to retransmit the remaining streams using Incremental Redundancy (IR, i.e. the encoder rate is reduced). Furthermore, the HARQ is used with the I-BLAST (Iterative-BLAST) which grantees a high transmission rate.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.2A
• /
• pp.147-154
• /
• 2009

Antenna grouping algorithm is hybrid of beamforming and spatial multiplexing. In antenna grouping system, we partition $N_t$ transmit antennas into $N_r$ groups and use beamforming in a group, spatial multiplexing between groups. We can transmit $N_r$ data streams in the $N_t{\times}N_r$ antenna grouping system. With antenna grouping, we can achieve diversity gain through beamforming, and high spectral efficiency through spatial multiplexing. But if channel is ill-conditioned or there are some correlations between antennas, the performance of antenna grouping is seriously degraded and in that case, beamforming is the best transmit strategy. By selecting the antenna grouping mode when channel is well-conditioned and by selecting the beamforming mode when channel is ill-conditioned, we can prevent serious fluctuation of BER performance caused by varying channel condition and achieve the best BER performance. In this paper, we investigate mode selection algorithm which can select antenna grouping mode or beamforming mode. we also propose a simple mode selection criterion.