• Journal of the Korea Fashion and Costume Design Association
• /
• v.15 no.2
• /
• pp.77-89
• /
• 2013

This study investigated the formation of silhouette and hemline shape of knit flare skirts according to the properties of knit material through virtual clothing with a 3D virtual clothing system called i-Designer of Technoa, thus building a database of the property data of knit material to reduce the number of sample making steps repeated and implemented several times in the process of clothes making. The results would help to estimate a silhouette in advance, offer assistance to the development of original knit wear, and explore ways to provide basic data for the development of the knit industry of the nation. The investigator made 12 kinds of experimental clothes to the angles(width of skirt: $90^{\circ}$ and $180^{\circ}$), gauge(7G, 12G, and 15G), and grain directions(wale and bias direction) of experimental clothes for virtual clothing. The dynamic characteristics of knit skirt samples according to each gauge were measured with the KES-FB system. Draper shapes were analyzed with the sectional shape data of hemline based on i-Designer. As for the measurements of the sectional shape of hemline and the formation of silhouette, the number of nodes, the average height of node mountains and valleys, and the hemline width right and left and before and after increased at the angle of $180^{\circ}$ than $90^{\circ}$. As gauges multiplied, the number of nodes, and silhouette angle dropping. When considering grain directions, the number of nodes and silhouette index increased in the wale direction at the angle of $90^{\circ}$ with the number of nodes and silhouette angle increasing in the wale direction at the angle of $180^{\circ}$.

• The Research Journal of the Costume Culture
• /
• v.17 no.3
• /
• pp.472-483
• /
• 2009

The purpose of this study is to analyse the effects of knit samples' mechanical properties on changes of skirt length of knit flared skirt, and to compare it to the knitting method of a seamless knitted flare skirt. So, I compared the appearance and 3-dimensional shape of a seamless knitted flare skirt with those of a fully cut knit flared skirt. For this study, 18 kinds of cut and sew or seamless knitted test garment were made. The data analysis methods used in this study were descriptive statistics, one-way ANOVA, correlation analysis, and regression analysis. The results are as follows: The result of the evaluation of knit samples' mechanical properties by the KES-FB system showed that elongation decreased as gauge increased and course direction was greatest among grain directions. The length change after wearing the knitted flare skirts appeared wholly equal to the seamless knitted, compared with the cut and sew. The change was biggest at $180^{\circ}$, 7G of the cut and sew. In grain direction, bias cut showed more than 1.2cm of length change. As the weight and thickness increased, the length changes become larger. The regression analysis indicated that the greatest contributive variables on the length changes were elongation, weight, and thickness.

• The Research Journal of the Costume Culture
• /
• v.16 no.3
• /
• pp.425-431
• /
• 2008

The purpose of this study was to observe the changes of skirt length of knitted flare skirts when the seamless test garments were made which had been having full shape while being knitted and to change and amend the challenges in advance when those were knitted. For this study, I made 6 kinds of knitted test garments of wool 100% yarn with seamless knitting machine, which differed from each other by skirt angles ($90^{\circ},\;180^{\circ}$) and gauges (7G, 12G, 15G), and then I measured deflection changes of their length for 2 weeks. Findings and conclusions drawn from this study were as follows: First, the side seam line of full shape hecame somewhat longer than center. Second, 7G and $180^{\circ}$ knitted flare skirt showed the biggest length deflection changes. Third, there was no difference at rear waist deflection changes between front pattern and rear. Fourth, it was difficult to control the tensions of right and left strings as to the knitting directions.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.13 no.2
• /
• pp.103-119
• /
• 2011

This study set out to analyze the solid shapes of knit flared skirts, which are best represented in a 3-dimensional shape for all knit skirts, according to the seamed and seamless production method and to estimate the silhouettes of knit flared skirts based on the results. It also aimed to help with the introduction and spread of seamless weaving by revising and supplementing potential problems and provide findings that would be put to active use as basic data, thus contributing to the development of original knitwear and offering fundamental materials for the development of the knitting industry. A number of experimental knit flared skirts were made according to skirt angle ($90^{\circ}$ and $180^{\circ}$), gauge (7G, 12G, and 15G), and grain (bias, wale, and radial), including 12 kinds of seamed knit flared skirts and 6 kinds of seamless knit flared skirts. Using a three-dimensional shape measurement system, the investigator measured the cross-sectional shapes of their hemlines. The SPSS 12 Version program was used for statistical processing, and descriptive statistics such as mean and standard deviation were used to compare the seamed and seamless knit flared skirts in the measurements (measurement items) of their solid shapes according to the width, gauges, and grain directions. The central grain direction of seamless knit flared skirts was in a radial form and even hemlines, thus presenting a beautiful appearance and solid shape. The 3-dimensional shapes show that seamless knit flared skirts are superior to seamed ones. The research findings are expected to open a door for Korea's knitting industry to quickly respond to small quantity batch production and additional orders.

• The Research Journal of the Costume Culture
• /
• v.18 no.3
• /
• pp.465-475
• /
• 2010

For this study, 18 kinds of cut and sew or seamless knitted test garment were made. Samples differed from each other by skirt angles($90^{\circ}$, $180^{\circ}$), gauges(7G, 12G, 15G), and grain directions(bias direction, wale direction, and radial direction). After measuring the mechanical properties of various gauges on the seamless knitting machine, I compared shape of the knitted flare skirt through subjective evaluation on appearances. The data analysis methods used in this study were descriptive statistics, one-way ANOVA, Duncan-test, correlation analysis, and regression analysis. The subjective evaluation on appearances of knitted flare skirts showed the following: In case of $90^{\circ}$ skirt, the seamless skirt showed a much higher score in every gauge expect that of the cut and sew 12G, and silhouette of 15G wale direction. In case of the $180^{\circ}$ skirt, the seamless type showed a much higher score in every item over the cut and sew expect the silhouette part of 7G wale direction.