• Journal of Korea Society of Industrial Information Systems
• /
• v.11 no.3
• /
• pp.15-19
• /
• 2006

In shallow water active sonar environment, reverberation which is a non-white noise is one of the main source of performance degradation of target detection. In this case, the received signal is whitened before applying matched filter known as an optimum filter in the presence of white noise. However implementation of this method is very difficult because of the non-stationary characteristic of reverberation. Traditionally reverberation is assumed local stationary. In this paper, we estimate a range of stationary of reverberation signal, and then propose a pre-whitening method which improve the performance of pre-whitening block normalized matched filter in presence of non-white reverberation noise. Proposed whitener shows better whitening performance than traditional whitener because it use later as well as before reverberation of target signal. To evaluate performance of the proposed whitener, an actual measurement data sampled at the East-Sea is used for computer simulation. The target detector with new whitener is shown better performance than detector with traditional whitener.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.2
• /
• pp.38-43
• /
• 2017

Many studies about generating images of seabed using active sonar have been carried out but image resolution enhancement is still an important problem. Many methods have been proposed to improve sonar resolution and the approach using narrow beam width is commonly and widely applied to enhance azimuth resolution. Unfortunately, this has technical limitations to reduce the beam width. Therefore, signal processing techniques are essential to achieving higher azimuth resolution when an array with conventional beam width is employed. This paper proposes a new approach that utilizes overlapped beams to obtain higher resolution.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.2 s.95
• /
• pp.153-163
• /
• 1999

본 연구에서는 격자패널을 통한 소음전달을 감소시키기 위하여 외부 구조적 가진으로부터 유발된 경량 패널의 진동을 능동 제어하는 기법을 기술한다. 최적 되먹임제어기와 적응 앞먹임제어기가 결합된 혼합형 제어기가 진동제어기로 사용된다. 되먹임제어기는 주파수 영역의 모델규명법에 의해 추출된 다중 입/출력 패널진동계 모델에 대하여 LQG 최적기법을 이용하여 감쇠능을 향상시키도록 설계된다. 앞먹임제어기는 되먹임 궤환의 결합효과를 자동적으로 보정할 수 있는 제안된 학습법칙에 기초하여 패널의 잔류진동이 최소가 되도록 적응된다. 45.7${\times}$45.7${\times}$2.54 ${cm^3}$ 벌집형상의 고강도 패널, 4개의 관성형 구동기 및 이산신호처리장치에 의해 구현된 패널 진동계에 대한 능동제어 실험을 수행해 본 결과 600Hz 주파수대역에 대한 12dB 진동저감이 이루어 질 수 있었다.

• Journal of KSNVE
• /
• v.9 no.6
• /
• pp.1137-1144
• /
• 1999

Most of ANC(active noise control) researches are focused on adaptive algorithms, computer simulations and implementations of single-channel system in experimental environments. In this paper, a multi-channel ANC system based on DSP's was developed to obtain global attenuations over wide region and applied to the active control of the humming noise generated by a transformer. The developed ANC system including 24 microphones and 12 spearkers was applied to the real transformer noise reduction problem. Results showed that the control system could successfully control the humming noise over the region of interest.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.5
• /
• pp.667-675
• /
• 2002

In this Paper, we present a new nonlinear active noise control scheme using neural networks. Two neural network4 are used, one is for the active controller and another one is for the secondary path model. This scheme is suitable for the plant which has time-varing secondary path dynamics, because the secondary path modeling is performed via on-line fashion. Simulation results of active noise control with nonlinear primary/secondary path are presented. The results show that the new algorithm can reduce the noise level greatly.

• Journal of Power System Engineering
• /
• v.6 no.4
• /
• pp.73-80
• /
• 2002

이 논문은 MIMO 능동 자기 베어링 시스템에 있어서의 병진 및 회전(기울기)운동을 하는 횡축형 강체 로터의 동적 거동을 모델링하고, 로터 양 끝단의 간섭효과를 고려한 제어방법을 제안한다. 제어기는 DSP 보드를 이용하였으며, 설계된 제어기의 타당성을 시뮬레이션 및 실험을 통하여 검증하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.7B
• /
• pp.1185-1193
• /
• 2000

본 논문은 군 위성통신에서 능동신호처리(OBP) 방식을 고려서 위협요소인 전대역잡음(FBN) 재밍 및 부분대역잡음(PBN) 재밍 환경하에서 BPT, DOT, DRT, SRT방식 중계기구조에 따른 통신 성능의 열화 정도를 비교분석하였다. FBN환경에서는 OBP의 모든 방식이 통신 가능하였고, PBN환경에서는 모든 OBP 방식의 통신이 불가능하였으나, 다이버시티의 증가에 따라 성능이 향상되어 통신이 가능함을 확인하였다. 그러나, BPT와 DOT방식은 PBN환경에서 다이버시티를 증가하여도 성능이 개선되지 않았다. 성능분석 결과 SRT의 성능이 가장 우수하였으며, 비용대 효과 측면을 고려할 경우 SRT의 위협에 대한 항재밍성능과 유사한 성능을 하고 비용이 효율적인 DRT 방식의 적용가능성을 확인하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.36 no.3
• /
• pp.179-185
• /
• 2017

The problem that occurred in the design/fabrication/testing of the wideband transmitting power amplifier for an embedded active SONAR (Sound Navigation and Ranging) system operating underwater was analyzed and the solution of the problem was proposed in this paper. Wideband acoustic SONAR systems had been developed in order to improve the underwater detection performance. The underwater acoustic transmission system had been also developed to achieve the wideband SONAR system. In this paper, the wideband acoustic transmission signal was generated using a 2 Level sawtooth type Class D PWM (Pulse Width Modulation) which was not complicated to implement. When the sonar signals having two or more frequencies were simultaneously generated, parasitic frequencies were added to the original signals by integer multiples of the frequency difference of the original signal. To cope with this problem, we proposed a way to remove the parasitic frequency from the source signal through modeling and simulation of the implemented power amplifier and PWM control hardware using MATLAB and Simulink.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.6 s.97
• /
• pp.586-593
• /
• 2005

It is very important to reduce the PAPR(Peak to Average Power Ratio) in the OFDM(Orthogonal Frequency Division Multiplexing) communication system. We propose an ACE(Active Constellation Extension) method that does not require the side information unlike the conventional PTS and SLM method. This ACE method is to clip the OFDM signal for the PAPR reduction. Then, the basic constellation actively moves into the higher level of M-QAM for the constellation extension due to the clipping. The already existing M-QAM system can be available so that it can be easily realized. So, we can get the target PAPR by the extension of the constellation level. In this paper, we can find the PAPR reduction of 4 dB by the 16-QAM extension, and can achieve the target PAPR by the 64-QAM ACE(Active Constellation Extension).

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.9
• /
• pp.172-180
• /
• 2012

In multi-static sonar for detecting an underwater target, received signals contain the target echo, reverberation and clutter. Clutter and reverberation are main causes of increasing the false alarm rate. MRAL classifies received signals according to the spatial similarity, and it regards classified signal as reflected signals from a reflector. MRAL reduces the false alarm rate this way. However, the results of MRAL can have localization errors. In this paper, an MRAL post processing algorithm is proposed to reduce the localization errors with the least square (LS) method.