• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.9
• /
• pp.3176-3183
• /
• 2010

A multi-scale fatigue life prediction methodology of composite pressure vessels subjected to multi-axial loading has been proposed in this paper. The multi-scale approach starts from the constituents, fiber, matrix and interface, leading to predict behavior of ply, laminates and eventually the composite structures. The multi-scale fatigue life prediction methodology is composed of two steps: macro stress analysis and micro mechanics of failure based on fatigue analysis. In the macro stress analysis, multi-axial fatigue loading acting at laminate is determined from finite element analysis of composite pressure vessel, and ply stresses are computed using a classical laminate theory. The micro stresses are calculated in each constituent from ply stresses using a micromechanical model. Three methods are employed in predicting fatigue life of each constituent, i.e. a maximum stress method for fiber, an equivalent stress method for multi-axially loaded matrix, and a critical plane method for the interface. A modified Goodman diagram is used to take into account the generic mean stresses. Damages from each loading cycle are accumulated using Miner's rule. Monte Carlo simulation has been performed to predict the overall fatigue life of a composite pressure vessel considering statistical distribution of material properties of each constituent, fiber volume fraction and manufacturing winding angle.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.7
• /
• pp.690-698
• /
• 2010

Contamination of groundwater resources by organic chemicals has become an issue of increasing environmental concern. Surfactant-enhanced aquifer remediation (SEAR) is widely recognized as one of the most promising techniques to remediate organic contaminations in-situ. Solutions of surfactant or surfactant with polymer are used to dramatically expedite the process, which in turn, may reduce the treatment time of a site compared to use of water alone. In the design of surfactant-based technologies for remediation of organic contaminated aquifers, it is very important to have a considerable analysis using extensive numerical simulations prior to full-scale implementation. This study investigated the formation and flow of microemulsions during SEAR of organic-contaminated aquifer using the finite difference model UTCHEM, a three-dimensional, multicomponent, multiphase, compositional model. The remediation process variables considered in this study were the sequence of injection fluids, the injection and extraction rate, the concentrations of polymer in surfactant slug and chase water, and the duration of surfactant injection. For each variable, temporal changes in injection and production wells and spatial distributions of relative saturations in the organic phase were compared. Cleanup time and cumulative organic recovery were also quantified. The study would provide useful information to design strategies for the remediation of nonaqueous phase liquid-contaminated aquifers.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.26-41
• /
• 2016

Catchment Hydrologic Cycle Assess Tool (CAT) is a model for hydrologic cycle assessment based on physical parameters. In this study, CAT was applied for short-term runoff simulation and connected with model-independent parameter estimation (PEST) for auto-calibrating parameters. The model performance was compared with HEC-HMS, which is widely used for short-term runoff simulation. The study area is the Pangyo Watershed ($22.9km^2$), which includes the Unjung-Cheon and Geumto-Cheon tributaries of the Tan-Cheon stream. Simulation periods were selected from six rainfall events of a two-year period (2006-2007). For the runoff simulation, CAT was applied using three types of infiltration methods (excess rainfall, Green and Ampt and Horton). Sensitivity analysis was carried out to select the parameters and then CAT was optimized using PEST. The model performance of HEC-HMS and CAT-PEST for the rainfall events were within an acceptable limit with Nash Sutcliffe efficiencies (NSE) of 0.63-0.91 and 0.42-0.93, respectively. The simulation results of HEC-HMS have high accuracy in the case of rainfall events that have a sensitive relationship between initial soil moisture conditions and runoff characteristics. The results of CAT-PEST indicated the possibility of reflecting a real runoff system using various physical parameters.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.37 no.1
• /
• pp.1-15
• /
• 2000

To reconstruct 3- D shape, It is a common strategy to acquire multiple range Images from different viewpoints and integrate them into a common coordinates In this paper, we particularly focus on the registration and integration processes for combining all range Images into one surface model. For the registration, we propose the 2-step registration algorithm, which consists of 2 steps the rough registration step using all data points and the fine registration step using the high-curved data points For the integration, we propose a new algorithm, referred to as ‘multi-registration’ technique, to alleviate the error accumulation problem, which occurs during applying the pair-wise registration to each range image sequentially, in order to transform them into a common reference frame Intensive experiments are performed on the various real range data In experiments, all range images were registered within 1 minutes on Pentium 150MHz PC The results show that the proposed algorithms registrate and integrate multiple range Images within a tolerable error bound in a reasonable computation time, and the total error between all range Images are equalized with our proposed algorithms.

• Journal of The Korean Association For Science Education
• /
• v.37 no.3
• /
• pp.417-427
• /
• 2017

Media is the medium that impart information beyond time and space. They refer to characters or images that serve as means to convey information. From old media such as newspapers and television to new media such as the internet and smart phones, media has developed cumulatively with the development of technology. The goal of media education is to develop the understanding of the properties of media, the ability of critical interpretation of media and selective acceptance. Furthermore it is to cultivate the ability to express meaning creatively and communicate through media. I carried out 'the research of Korean classroom instruction models based on media' with Korean language and social studies education researchers from July 2016 to December 2016. This study is a fundamental study of the project. Based on 58 research papers published between 2006 and 2016, research trends and factors were extracted through literature studies related to media-based science learning. The Result has shown that the studies related to media-based science learning is on the rise, and more than half of all researchers studied about elementary school students. The studies were divided into research on students, research on teachers and pre-service teachers, research on smart devices or media contents, and research on the development of digital textbooks. Among the four variables, there were many researches related to students' cognitive and affective development, and the development and application of media contents.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.3
• /
• pp.41-48
• /
• 2015

Several sensor systems are used to estimate and predict the slope behaviors, however though slope sensing systems are much up-to-dated compared to before, they are mainly focused on the hardware developing. It means the analyzing software is deficient to apply the examining slope behavior for slope stability. In real case, slope behavior shows the 3-dimensional movement and failure; however the modeling methods for 3-D behavior are more difficult and need more variables. 1-D analysis shows only the length variation, however the real slope makes the 3-D behaviors. To fix the 3-D space coordinate, three values should be determined such as length, horizontal angle and vertical angle. Therefore if the 3-D coordinate system were composed by the points considered of two directions and length, the 3-D space could be separated into horizontal plane and vertical plane. The data from DY-slope in Chungbuk province was analyzed to the developed 3-D coordinate system. It is concluded from the results of 3-D analysis, the slope is generally moving to transverse direction, also the displacements are happening to road and vertical direction at the same time. Presently, the accumulated displacement between sensing points shows small value within 4.3 cm, and the displacements of all sensing points show the similar directions and magnitudes.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.3
• /
• pp.157-166
• /
• 2018

Purpose: This study was aimed to compare the consistency between the custom abutment design and the output in two CAD software programs. Materials and Methods: Customized abutments were designed by using 3Shape Dental System CAD software and Delta9 CAD software on a plaster model with implants (CRM STL file). After milling of the designed abutments, the abutments were scanned with a contact method scanner (Test STL file). We overlaid the Test STL file with each CRM STL file by using inspection software, and then compared the milling reproducibility by measuring the output error of the specimens from each CAD software program. Results: The Delta9 showed better milling reproducibility than 3Shape when comparing the milling errors obtained with a full scan of all specimens (P < .05) and also when comparing the axial wall region specifically according to the axial angle. With 0.9 mm marginal radius, the Delta9 showed better consistency between the design and the output than 3Shape (P < .05). While, anti-rotation form had no significant difference in error between the two systems. When cumulative errors were compared, the Delta9 showed better milling reproducibility in almost cases (P < .05). Conclusion: Delta9 showed a significantly smaller error for most of the abutment design options. This means that it is possible to facilitate generation of printouts with reliable reproducibility and high precision with respect to the planned design.

• Journal of Bio-Environment Control
• /
• v.18 no.3
• /
• pp.253-257
• /
• 2009

To analysis effect of environment factors on productivity of sweet pepper according to greenhouse covering material (glass, plastic film), this was investigated. In glasshouse, outside light was positively correlated with yield as that $100MJ{\cdot}m^{-2}$ of outside light increased $300{\sim}500g{\cdot}m^{-2}$, also cumulative temperature was same tendency. On possibility of model development for yield estimate cumulative temperature was high than outside light. According to covering material, leaf photosynthesis, productivity per out-side light and term in glasshouse was more high 13%, 46%, and 47% compared with plastic film house, respectively. Result of analysis of effect of light, temperature, and $CO_2$ on yield, relative yield coefficient, yield increment coefficient, and yield reduction coefficient in glasshouse were more high 25%, 73%, and 34% compared with plastic film house, respectively. Hence, sweet pepper's growing in glasshouse compare with plastic film house had more productivity, but that had more sensitivity to charge of environment factors.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.6
• /
• pp.662-669
• /
• 2018

Recently, the installation of submarine power cables is under consideration due to the increase of electric power usage and the development of the offshore wind farm in island areas, including Jeju. In order to protect power cables installed on the seabed, it is necessary to calculate the burial depth based on the characteristics of anchoring, dragging and fishing, etc. However, there is no design standard related to the size of target ships to protect the cables in Korea. In this study, we analyzed the design standards for the protection of domestic submarine pipelines similar to submarine cables, and developed the risk matrix based on the classification by emergency anchoring considering the installation environment, then designed the size of target ships according to the cumulative function scale by ship size sailing through the sea concerned. Also, we linked marine accident conditions, such as anchoring, dragging, etc. and the environmental conditions such as current, sea-area depth of installation etc. to the criteria of the protection of submarine cable, and examined the size of specific target ships by dividing the operating environment of ships into harbor, coastal and short sea. To confirm the adequacy and availability of the size of target ships, we verified this result by applying to No. 3 submarine power cables, which is to be installed in the section from Wando to Jeju Island. This result is expected to influence in the development of a protection system for submarine cables and pipelines as well as the selection of anchor weight according to the determination of burial depth.

• Journal of Industrial Convergence
• /
• v.17 no.4
• /
• pp.77-86
• /
• 2019

The purpose of this study was to identify the effect of Home Health Nursing based Respiratory Management Program (HHNbRMP) on unmet healthcare need and healthcare resource utilizations of patients applying the home mechanical ventilator in the home with amyotrophic lateral sclerosis. The subjects of this study were 40 patients placed in an experimental group(n=19) and a control group(n=21), respectively. This HHNbRMP based on Cox's interaction model was consisted of cognitive assent (education, specialized medical care, case management), internal motivation (airway clearance, thoracic and air accumulated exercise) and psychological response (meditation & active listening). The intervention was applied to experimental group during 12 weeks. As variables was measured at baseline, twelve, twenty-four weeks and healthcare unmet need, resource utilizations (admission, out patient department, emergency room) was measured at 24 weeks. The data were analyzed by t-test, ANOVA and Repeated Measures ANCOVA. This intervention was not effective the unmet healthcare need. But the admission in to the hospital among the healthcare resource utilizations variables showed a significant difference at twenty-four weeks(t=4.17, p=.049). This results suggest that applying this program tailored to patients condition, utility of medical resource would be decreased, specially admission.