• Proceedings of the KIEE Conference
• /
• 2000.07d
• /
• pp.2822-2824
• /
• 2000

이 논문에서는 공장에서의 생산관리 및 구내 배전선로의 부하상태 관리용으로 개발한 다목적 실시간 원격 계측시스템을 제안하고 있다. 개발된 실시간 원격 계측시스템을 필요한 정보를 수집하는 원격단말장치와 수집된 정보를 제어 및 RS485 통신을 이용하여 정보를 전송하고 사용자 중심으로 그래픽 관리하는 호스트로 구성되어 있다. 특히, 기 설치된 생산설비에 대한 원격 생산관리 기능을 보유한 시스템을 확장하여, 이를 구내 배전선로에서 각 구간/선로별 전압, 전류, 누설전류 등의 정보 검출한다. 각 구간/선로별 전력, 전압, 전류 등 부하 운영상태 및 누설전류 등의 고장원인을 검출함으로써 전기화재 및 감전사고를 예방할 수 있는 감시 시스템을 제안하였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.6
• /
• pp.496-503
• /
• 2016

Leakages at plant structures of power and petrochemistry plants have led to casualties and economic losses. These leakages are caused by fatigue failure of pipelines and their wall thickness. Vibration measurement methods for plant pipelines mainly use acceleration and laser sensors. These sensors are difficult to install and operate and thus lead to an increase in operational cost especially for wide area surveillance. Recently, measurements of leak and vibration displacements using cameras have attracted the interest of many researchers. This method has advantages such as simple installation, long distance monitoring, and wide area surveillance. Therefore, in this paper, we have developed a system that can measure the leakage and vibrational displacement by using a camera. Furthermore, the developed system was verified with experimental data.

• Transactions of the KSME C: Technology and Education
• /
• v.3 no.4
• /
• pp.291-297
• /
• 2015

As promising future energy source, hydrogen has been drawing much attention; however, it is easily leaked from the small gap in any storage container due to its find molecule size. In this study, Laser induced breakdown spectroscopy(LIBS) was used for hydrogen leak detection, and feasibility of the scheme was evaluated based on different way for plasma generation. Laser power of 295 mW was required for generating plasma on metal surface to measure hydrogen atomic emission while approximately 2.5 times higher laser power was needed for plasma formation directly in the hydrogen gas stream. It was shown that peak to base ratio increased linearly with increasing the concentration of hydrogen. It can be concluded that LIBS is a viable technique for hydrogen sensing when the concentration of hydrogen is less than 5%.

• Journal of the Korea Society of Computer and Information
• /
• v.8 no.4
• /
• pp.75-80
• /
• 2003

In this paper, we designed add current scan system basically. Although NDT system using AC method in now days had problem with limit of detection rate and limit of device organization, in this paper, we made up these problem so that designed device smaller than system used, reduction of cost of system organization and precision of measuring crack. Also, AC leakage flux system had high accuracy about minute crack in the surface and advantage of designing system easily so that we designed system for concerning about crack of surface. Furthermore, it can be able to detect exact crack of reference in wide area by using DSP320C31 chip to reduce the time of measuring crack.

• Journal of Radiation Protection and Research
• /
• v.28 no.2
• /
• pp.87-95
• /
• 2003

The fabrication process and the structure of PIN semiconductor detectors have been designed optimally by simulation for doping concentration and width of p+ layer, impurities re-contribution due to annealing and the current distribution due to guard ring at the sliced edges. The characteristics to radiation response has been also simulated in terms of Monte Carlo Method. The device has been fabricated on n type, $400\;{\Omega}cm$, orientation <100>, Floating-Zone silicon wafer using the simulation results. The leakage current density of $0.7nA/cm^2/100{\mu}m$ is achieved by this process. The good linearity of radiation response to Cs-137 was kept within the exposure ranges between 5 mR/h and 25 R/h. This proposed process could be applied for fabricating a PIN semiconductor detector for measuring individual dose.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.20 no.1
• /
• pp.38-45
• /
• 2000

In this research, MFL technique has been studied for the inspection of storage tank floor. The reference specimens having 20%, 40%, 60% and 80% slot's are fabricated using the carbon steel plates of a 6mm and 10mm thick. Powerful permanent magnets and Hall effect sensors are used to this application. It is shown that our system is able to detect metal loss like a slot. Also, it is possible that slot diameter is measured using transverse type of Hall generator. It is demonstrated that MFL can not differentiate between the response from top side and bottom side slot. Flux leakage response from a bottom side indication is significantly lower in amplitude than that from an equivalent top side slot. It is essential to know this sensor lift-off distance because the MFL signal also changes considerably with the sensor lift-off distance.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.4
• /
• pp.615-620
• /
• 2017

In this study, we have developed the resistive leakage current detecting and tripping circuit breaker based on a 32bit ARM processor. The developed leakage circuit breaker can be operated in a desired trip threshold within 0.03 seconds as specified in KS C 4613. This resistive leakage current breaker is expected to be applicable as a circuit breake for prevention of electric fires and electric shock in smart distribution panel.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.65-71
• /
• 2001

In this paper, acoustic omission technique(AE) has been applied to detect leak for heat exchanger by analyzing the characteristics of signal obtained from leak. It was confirmed that the characteristics of the signal generated by the turbulence of gas in the heat exchanger is narrow band signal having between 130-250KHz. Generally, the amplitude of leak signal is increased as the leak size increasing, but showed no significant change at frequency characteristic. Leak source location can be found by searching for the point of highest signal amplitude by comparing wi th several fired sensors.

• Progress in Medical Physics
• /
• v.15 no.2
• /
• pp.105-111
• /
• 2004

The parallel plate detector with dielectric film for dosimetry was designed to measure detection characteristic of 6 MV X-ray with medical linear accelerator. PTFE film was inserted into FEP films that are made by two one-side metal coated materials for ion source. The thicknesses of PTFE dielectric film was 100 ${\mu}{\textrm}{m}$ and the thickness of FEP dielectric film was 100 ${\mu}{\textrm}{m}$, respectively. This detector was fixed by two acrylic plate for physical hardness ad geometrical consistency. The geometrical condition for measurement with parallel-plate for detector was below; SSD=100 cm and the 5 cm depth between detector and phantom surface The major parameter of detector characteristics such as zero drift current, leakage current, charge response by applied voltage, reproducibility, linearity, TMR measurement, dose rate effect were measured. The zero drift currents are 8.3 pA and leakage currents are 10 pA. The charge response of applied voltage is showing linearity in 414 voltage. The measurement deviation of reproducibility in this detector is within 1% for dose and the linearity of applied dose shows in this detector. The TMR curves in phantom between this parallel plate detector and reference detector are matched within 3% deviation from maximum dose depth to 7.5 cm depth. It is considered that this dosimetric system is satisfactory for the purpose of the constancy check of the 6 MV x-ray from medical linear accelerator.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2018.07a
• /
• pp.29-30
• /
• 2018

전 세계적으로 급증하고 있는 에너지 수요로 인해 오일, 가스 등의 에너지 생산 매체를 운송 할 수 있는 수송 수단인 배관에 대한 수요도 증가하고 있는 추세이다. 그러나 이러한 배관을 장시간 사용할 경우 노후화로 인해 발생되는 파공은 배관에 흐르는 유체 누설의 원인이 되고, 나아가서 경제 및 재난 피해를 야기할 수 있다. 따라서 다양한 배관 누설 검출 기술들이 개발되고 있는 추세이며, 이를 위해서는 신뢰성 있는 결함 모사 데이터의 확보가 매우 중요하다. 본 논문에서는 신뢰성 있는 데이터 수집을 위해 배관의 누설 상황을 모사 할 수 있는 테스트베드를 제어하고, 테스트베드에서 데이터를 안정적으로 취득할 수 있는 테스트베드 제어 및 데이터 취득 시스템을 제안한다.