• The Journal of the Korea Contents Association
• /
• v.22 no.8
• /
• pp.557-569
• /
• 2022

The purpose of this study is intended to identify the mediated moderating effect including the mediating effect of job satisfaction and moderating effect of job expectations in the relation between work value, job satisfaction, In this study, the mediating effect of job satisfaction and job preference on the relationship between job value and quality of life were investigated. In this study, questions to measure job value, job satisfaction, and job preference were examined using GOMS data, and data analysis was performed using SPSS 23.0 and SPSS Macro. Since the mediated moderation model is an integrated model that includes mediating and moderating effects, the mediating effect, the moderating effect, and the mediated moderation effect were sequentially verified. As a result of the study, first, it was confirmed that the mediating effect model through job satisfaction was statistically significant. Next, it was confirmed that job value had a statistically significant effect on life satisfaction through the direct path and the indirect path through job satisfaction as a mediating variable. Third, it was confirmed that the moderated mediating effect model of job preference through job satisfaction was statistically significant. In detail, job value as an independent variables and job satisfaction as a mediating variable were found to have a statistically significant positive (+) effect on the dependent variable, quality of life.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.3
• /
• pp.145-149
• /
• 2017

Considering the various user height, we develop a low-cost multimedia electronic podium system for height adjustment. In order to recognize the user utilizes height of a single CCD camera and the ultrasonic sensor. It estimates the height from the user of the image obtained by the CCD camera. Also it uses renal region division method from the image recognition in order to effectively estimated. According to the estimated height, we implemented the control system for the height control of the electronic podium.

• Science of Emotion and Sensibility
• /
• v.3 no.2
• /
• pp.57-65
• /
• 2000

컨조인트 분석기법은 Marketing 분야에서 주로 많이 쓰여온 분석 방법으로서 제품의 중요한 속성들을 찾아내어 다양한 종류의 제품들에 대한 고객의 선호도를 분석하는 방법이다. 본 연구에서는 컨조인트 분석기법을 이용하여 의자의 물리적 적합도를 분석, 평가하여 사용자가 적합하다고 느끼는 최적의 의자를 밝히는데 목적을 두었다. 안정성, 여유성, 인체적합성, 안락성등 4개의 적합도 요소를 종속변수로 선택하고 의자 자체의 설계 요소에 해당하는 휴먼인테페이스 요소(HIE) 중 높이 조절 기능, 팔걸이, 등판길이의 3가지 속성을 독립변수로 사용하였다. 분석에 사용된 의자는 각 속성을 특징적으로 대표하는 8개의 의자들로서 구성되었다. 분석의 결과 네 가지의 적합성에 공통성적으로 가장 큰 영향을 주는 속성은 (남자 안정성은 예외) 등판길이로서 남자와 여자 모두 등판길이가 높을 때 안정적이며 안락하고 인체적합하며 여유성이 있다고 느낀다는 결과가 나왔다. 적합도의 네가지 항목 모두에서 공통적으로 등판길이가 높고 팔걸이가 있는 경우에 평가가 높게 나타났으며, 안정성의 경우에는 남·녀 모두 높이조절 기능이 없는 고정형을 더 높게 평가하는 것으로 나타났다.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.230.1-230.1
• /
• 2012

본 논문에서는 대구경 광학탑재체의 조립, 정렬 및 시험에 사용되는 고정밀, 고안정 짐발장치의 개발에 대해서 소개하고자 한다. 광학탑재체의 광학시험을 위해 사용되는 짐발장치는 광축높이를 유지하기 위해서 높이조절이 가능해야하고, 조립과정과 광학시험과정 그리고 시험 후 광학탑재체를 짐발 장치로부터 분리하기 위해 수평상태와 수직상태로의 회전이 가능해야 한다. 광학측정 시험과정 중에 결상위치의 미세한 조절을 위해 광학탑재체를 수평상태에서 상하좌우 정밀한 회전이 가능해야한다. 우주궤도환경 하에서 성능측정을 위해 열진공체임버 안에서의 광학시험이 필요하므로 짐발장치를 구성하는 재질은 모두 진공사용이 적합한 것이어야 한다. 광학측정 중에 측정설비주변에서부터 인가된 외란은 광학시험과 같은 민감한 시험에서는 철저하게 제거되어야 하는데, 이와 관련하여 짐발장치의 광학측정시험형상에서의 고유진동수와 같은 동적 특성도 설계과정에 반영하여 안정적인 측정 장치가 되도록 고려되어야 한다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.118-123
• /
• 2002

1) 트랙터 조정공간에서 헤드룸은 28.8 cm의 충분한 공간을 확보하고 있으므로 의복이나 모자의 두께를 고려할 경우에도 헤드룸의 클리어런스는 적합함을 알 수 있다. 레그룸의 공간적인 여유는 시트의 수평거리와 높이의 적합성을 보여준다. 2) 조향핸들의 각도는 일반적으로 안락하다고 알려져 있는 차량의 조향핸들 각도 보다 약 7$^{\circ}$크지만 조향핸들의 높이와 직경은 사용자의 인체특성에 적합하게 설계되어 있었다. 3) 조종석의 바닥에 설치된 액셀레이터와 브레이크는 조향핸들에 의해 공간적인 제약을 받지 않았으며, 시트는 액셀레이터와 브레이크를 발로 조작하는데 적합한 위치로 설계되어 있었다. 4) 전진/후진 조절 레버는 조향핸들에 의해 조작하는 팔이 방해받지 않았으며, 시트의 레이아웃 또한 전진/후진 조절 레버를 사용하는데 어려움이 없었다.

• Agrochemical news magazine
• /
• v.25 no.4 s.197
• /
• pp.10-13
• /
• 2004

• Journal of Bio-Environment Control
• /
• v.19 no.4
• /
• pp.240-245
• /
• 2010

The objective of this study was to determine the effect of different height of drainpipe and growing media soilless cultivated cut rose in container culture. Two experiment were to examine the effect of the drainpipe height and media composition on yield and quality of cut rose, Four different drainpipe height (0, 3, 6, 9 cm) were treated to determine of optimal container type. Yield was the highest at 3 cm drainpipe height, but quality was not significantly affected by drainpipe height. Survival rate of rose was 100%, 100%, 92%, and 92%, respectively. Two different drainpipe height (0, 3 cm) and 7 media composition (pure coir and pelite, and mixed with two media 3 : 1, 2 : 1, 1 : 1, 1 : 2, 1 : 3 v/v) was treated to determine of media composition related to drainpipe height. The supply of nutrient solution was controlled by the signal of water potential at -5 kPa using frequency domain reflectometry (FDR) sensor in mixed coir with pelite 3 : 1, 1 : 1, 1 : 3 (v/v), respectively. Irrigation frequency reduced in high ratio of coir media and 3 cm height of drainpipe. Quality of cut rose except for flower weight and yield until 2nd harvest was not significantly affected by drainpipe height, but yield after 3rd was higher at 3 cm than 0 cm height of darinpipe. In the media composition, yield and qulity of cut rose was increased at high ratio of coir media.

• Journal of Bio-Environment Control
• /
• v.13 no.3
• /
• pp.178-184
• /
• 2004

This study carried out to develope the vision system which automatically finds out a optimum transferring period of plants (Perilla, Platycodon grandifloums and Lactuca sativa) by using image process-ing. This system mearsured a height, long diameter and short diameter of the three plants with 20 replications. Following results were obtained on each plant. Compared with real data to be measured by hand with the vernier calipers, height, long diameter and short diameter of Perilla showed 0.5 mm average error rate with 1.7%, 4.7 mm average error rate with 3.9% and 5.5 mm average error rate with 6.9% respectively. Those of Platycodon grandifloums showed 2.4 mm with 8.1%, 3.4 mm with 7.2% and 4.0 mm with 10.4% respectively. Those of Lactuca sativa showed 4.0 mm with 9.1 %,3.4 mm with 7.2% and 3.6 mm with 9.4% respectively. The system could be used to transfer accurately the plant seedling, if the system were improved enough to reduce error rate for the optimum transferring period of a plant in the greenhouse.

• The Journal of the Convergence on Culture Technology
• /
• v.10 no.1
• /
• pp.465-470
• /
• 2024

Kitchen cabinets are widely used for their spacious storage and efficient use of space, but their high installed location makes it difficult for the elderly and disabled to access. Therefore, in this paper, we propose a new height-adjustable kitchen cabinet that can be used more easily and safely. The lift-down range of cabinet was set considering the installation location of cabinet for efficient use of kitchen space and the maximum height accessible to the elderly and disabled, and the link geometry and driving method of the complex link mechanism were determined through the mechanism design procedure to ensure that the selected floor come down safely along the optimal descend path. In addition, the appropriate motor and control algorithm were added to allow the user to descend to the desired height with a simple button operation. It was confirmed through actual production that the proposed linkage mechanism performs the desired lift-down motion.

• Proceedings of the Korean Society for Bio-Environment Control Conference
• /
• 1999.04a
• /
• pp.48-53
• /
• 1999

현재 이용되고 있는 관행의 시설토마토 재배방법은 유지관리가 힘들고 온실 공간의 이용율이 낮으며, 작업환경이 좋지 않아 작업효율이 크게 떨어지고 생산 자동화시설의 도입에 어려움이 있다는 단점이 있다. 이러한 비효율성을 개선하기 위하여 새로운 토마토재배방법들이 개발되고 있으며, 새로운 시스템개발의 기본개념은 온실을 식물공장으로 전환하여 더 좋은 작업환경을 제공하고 작업효율을 높이는 것이다. (중략)