• 한국식품과학회지
• /
• 제30권1호
• /
• pp.237-240
• /
• 1998

새로운 저열량 감미료인 tagatose를 이용한 초콜렛을 제조하여 설탕으로 제조한 초콜렛과 물성을 비교하였다. 제조한 초콜렛의 물성을 Casson 식에 적용한 결과 tagatose를 첨가하여 만든 초콜렛의 consistency index는 1,070 cp이었고 yield stress는 3.4 Pa으로 설탕을 사용한 초콜렛과 유사한 점도 특성을 보였다. Tagatose를 첨가하여 제조한 초콜렛을 DSC를 사용하여 열 특성을 살펴본 결과 설탕을 사용한 초콜렛과 유사하였다. 두 초콜렛의 점성 특성과 열 특성은 유사하였으나 강도의 경우는 tagatose를 사용한 제품의 강도가 설탕으로 만든 초콜렛의 강도보다 떨어짐을 보여주었다.

• 한국재료학회지
• /
• 제21권11호
• /
• pp.623-627
• /
• 2011

This is a study on the distribution of acoustic emission parameters during a burst test for a type-II CNG vehicle fuel tank. A resonant AE sensor with a central frequency of 150 kHz was attached to the composite materials in the center of the fuel tank. The pressure was increased from 30 to 100% of the expected burst pressure and was maintained for 10 minutes at each level. Damage at 70% of expected burst pressure occurred by various damage mechanisms including fiber breakage and delamination, while that of below 60% only occurred by matrix crack initiation and growth. The count, duration and rise time of the AE signal at 60% of the expected burst pressure are distributed below 500, 5000 ${\mu}s$ and 300 ${\mu}s$, respectively. Then, at above 70% they increased with pressure by superimposing of individual AE signal generated at a nearby place. These results confirmed that the analysis of the distribution of AE parameters is an effective tool for estimating damage of a CNG fuel tank.

• 대한기계학회논문집A
• /
• 제35권9호
• /
• pp.1131-1136
• /
• 2011

본 연구는 자동차용 CNG 연료탱크의 파열시험시 발생하는 음향방출변수의 분석에 관한 내용이다. 연료탱크의 복합재료 중앙부 표면에 150kHz 공진형 AE센서를 부착하여 파열시험시 발생하는 음향방출 신호를 획득하고, 가압유지시간 동안의 hit, amplitude, count, duration, risetime, signal strength 등과 같은 음향방출 변수들을 분석하였다. 음향방출 변수 중 total count, total signal strength가 연료탱크 손상정도를 평가하는데 유용한 변수임을 알 수 있었다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제17권2호
• /
• pp.22-27
• /
• 2012

$^{226}Ra$ in groundwater could be analyzed by various methods. LSC (liquid scintillation counter) is used to measure its activity of Ba co-precipitates with Hisafe III scintillation cocktail solution. Counting efficiency was obtained using NIST $^{226}Ra$ standard solution in triplicate and calculated $^{226}Ra$ concentration using the efficiency values. $^{226}Ra$ values of 19 groundwaters having Gross-${\alpha}$ concentrations of more than 5 pCi/L ranged from ND (${\leq}$ 0.1 pCi/L) to 1.18 pCi/L. Geologic settings of the 19 areas are composed of granitic rocks of Pre-Cambrian and Jurassic and Cretaceous, gneiss (schist) of Pre-Cambrian, and volcanic rocks of Cretaceous. No relationship was shown among $^{226}Ra$ a concentrations and in-situ water quality data, and Gross-${\alpha}$, uranium, radon concentrations.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제25권3호
• /
• pp.65-73
• /
• 2020

Exposure assessment methodology for outdoor air inhalation pathways (i.e., inhalation of volatile compounds and fugitive dust in outdoor air) was investigated. Default values of several parameters currently used in Korea (e.g., Q/C; inverse value of concentration per unit flux, and frs; soil fraction in PM10) may not be suitable and lack site-specificity, as they have been adopted from the risk assessment guidance of the United States or the Netherlands. Such limitation can be addressed to a certain degree by incorporating the volatilization factor (VF) and the particulate emission factor (PEF) with Box model. This approach was applied to an exposure assessment of a site contaminated with petroleum hydrocarbons in Korea. The result indicated that the suggested methodology led to more accurate site-specific exposure assessment for outdoor inhalation pathways. Further work to establish methodology to determine site-specific Q/C values in Korea needs to be done to secure the reliability of the exposure assessment for outdoor air inhalation pathways.

• 비파괴검사학회지
• /
• 제35권3호
• /
• pp.179-184
• /
• 2015

본 연구에서는 풍력 블레이드의 피로손상으로 발생하는 음향방출신호의 특성을 살펴보기 위하여 길이 48 m의 풍력 블레이드 flap fatigue test를 100만 회까지 실시하였다. 60만 회까지는 hit수와 total energy가 꾸준히 증가하는 것으로 보아 블레이드의 손상이 지속되는 것으로 보이며, 주 손상기구는 rise time의 분석결과 기지균열의 생성과 성장으로 판단되었다. 또한 채널별 신호 분석을 통해 가장 손상을 많이 받은 부위가 체결부 20 m 지점의 skin과 spar의 접합 부위로 추정하였고 실제 손상 부위는 육안검사를 통해서도 확인되었다. Event source location 결과는 각 채널의 total energy 변화와 관련이 있었으며, 이러한 결과가 반영됨으로써 풍력 블레이드의 최적 설계에 유용할 것으로 판단된다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제21권6호
• /
• pp.169-178
• /
• 2016

The Standards, Measurement and Testing Programme (SM&T-formerly BCR) extraction procedure was applied to fractionate Cr, Cu, Ni, Pb and Zn in 23 top soil samples into: (i) exchangeable phase; (ii) reducible phase; (iii) oxidisable(sulfides and organics bound) phase; and (iv) residual phase. Fractions of Cr and Ni were in the order of residual > oxidisable > reducible > exchangeable phase. The oxidisable phase was identified as dominant for Cu and Pb. Zn had the highest ratio of exchangeable phase in comparision to the other metals. The bioavailability and mobility were assessed to be the greatest for Zn, followed by a decreasing order of Pb, Cu, Ni and Cr. All metal average concentrations in topsoil samples was higher in industrial sites than in agricultural sites. Our results revealed higher concentrations in topsoil samples (0~15 cm) than in sub soils (15~30 cm, 30~60 cm) for most metals at six sites (No. 5, 6, 17, 19, 20, 23). The fractions of exchangeable, reducible ad oxidisable phases showed relatively high correlation with soil pH, Fe/Mn oxide concentrations and organic matter contents, respectively.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제18권2호
• /
• pp.10-18
• /
• 2013

The pilot scale biopile system was designed and operated for evaluation of bioremediation efficiency for petroleum contaminated soil. The pilot scale biopile consisted of biopile dome, aeration system and monitoring system and two biopiles were operated with nutrients and inoculum for more 100 days. The test pile A and B were analyzed with regard to pH, total carbon contents, water contents, nutrients (N, P) and TPH. The initial TPH concentrations for pile A and pile B were about 10,000 mg/kg and 2,300 mg/kg, respectively. After 100 days, the TPH contents decreased about 70% in the pile A and 30% in the pile B. Also, n-$C_{17}$/pristane and n-$C_{18}$/phytane ratios in all pile were significantly changed. The microbial densities in the pile A was increased by approximately $10^7$ CFU/g-soil~$10^8$ CFU/g-soil, but there was almost no changed in the pile B. The average biodegradation rates were calculated about 66.8 mg/kg-day in the pile A and 10.9 mg/kg-day in the pile B. Over the course of operation period, pile temperature was considered the major limiting factor for the efficiency of all biopiles.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제23권4호
• /
• pp.48-59
• /
• 2018

Beryllium (Be), cobalt (Co), thallium (Tl) and vanadium (V) are candidates of 21 priority soil pollutants in Korea. The distribution of their concentration in soils from three contamination sources including industrial, roadside and mining areas was investigated. Concentrations of the metals were evaluated quantitatively using pollution indices and the fractionation of metals was conducted using modified SM&T (Standards Measurements and Testing programme) sequential extraction. Concentrations of the metals for all samples from industrial and roadside soils were within the range of natural background levels, while some of Be in soils from abandoned mines exceeded that the range. Enrichment Factor (EF) and Nemerow Integrated Pollution Index (NIPI) for Be, Co, Tl and V showed that there are effects or possibilities of anthropogenic activities. Pollution Load Index (PLI) analyses indicated all investigated sites needed further monitoring. The results of sequential extractions indicated mobile fractions (F1+F2) of Be, Tl and V were below 30% except some of Co in soil, which implies their low mobility to neighboring environment media. Variable tools like sequential extraction, comparison with background/actual concentration and pollution indices, as well as aqua regia extraction should be considered when evaluating Be, Co, Tl, V in soil.

• 비파괴검사학회지
• /
• 제32권1호
• /
• pp.1-6
• /
• 2012

본 연구에서는 광대역(100 kHz - 1 MHz) 탐촉자를 사용하여 자동차용 CNG연료탱크의 파열시험시 발생하는 음향방출신호의 분석을 통해 압력용기의 손상정도를 평가하였다. 압력이 420 bar까지 올라가기 전의 각 단계에서는 Kaiser 효과가 나타나고 creep 효과가 거의 나타나지 않으나, 420 bar 이상 상승시 creep 효과가 현저히 나타남으로써 용기가 손상을 입었다는 것을 알 수 있었으며, 480 bar 압력 상승 단계에서는 Kaiser 효과가 없어졌다. 540 bar의 압력 단계에서 공진형 탐촉자의 경우에서는 480 bar의 압력단계에 비하여 energy나 count 같은 activity가 감소하였으나 광대역 탐촉자의 경우 계속적으로 증가하였다. 또한 rise time이나 주파수 분석을 통해서 복합재료 압력용기의 손상 메카니즘을 관찰하기 위해서는 일반적으로 금속압력용기에서 많이 사용되는 공진형 탐촉자(150 kHz)보다 광대역 탐촉자가 효과적임을 알 수 있었다.