• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.22 no.1
• /
• pp.60-69
• /
• 1996

3-APPA는 생체내 물질 Υ-amino butyric acid와 유사한 구조를 갖는 물질로서 human fibroblasts 3-dimensional culture system 등의 in vitro 시험에서 collagen 합성촉진 효과, 세포증식 효과를 나타내며, hairless mouse를 이용한 동물시험에서도 collagen 합성이 증가되는 것으로 보고된 바 있다. 또한 피부 안정성에서도 우수한 결과를 보여줌으로서 화장품 분야에서 새로운 노화억제 물질로서 주목을 받게 되었다. 본 시험에서는 180명의 피검자를 대상으로 3개월간의 임상시험을 통하여 새로운 노화억제 물질인 3-APPA의 효능을 기존의 GABA 유사물질, aminopropane sulfonic acid와 비교하였다. 본 시험은 double-blind, randomized, vehicle-controlled clinical study로서 180명의 피검자를 APSA군, 3-APPA군, vehicle군으로 분류한 후 3개월간 매일 저녁 취침 전, 안면에 시험제품을 사용하도록 하였으며, 사용 전, 사용 1주후, 2주후, 6주후, 12주후 5회 설문지를 통하여 피부상태를 조사하였다. 각 설문내용은 피부 건조도, 피부 탄력도, 피부 주름량, 피부 윤기도, 피부 거칠기 정도에 대한 5개 질문으로 구성된 효능에 관한 질문과 흡수정도, 끈적임, 매끄러움, 보습력, 보습지속성, 전체적인 사용감에 대한 6개 질문으로 구성된 사용성에 관한 것이었다. 각 질문에 대하여는 매우 좋음 1점, 좋은 2점, 보통임 3점, 나쁨 4점, 매우 나쁨 5점 사이에서 답할 수 있도록 하였다. 시험 결과 APSA군은 6주와 12주후 피부 건조도, 피부 거칠기 항목에서 사용전에 비하여 유의한 차이를 나타내었다. 3-APPA군은 6주후 피부 건조도, 피부 거칠기, 피부 탄력도 항목에서 시료사용전에 비해 유의한 차이를 나타내었으며 12주후에는 피부 건조도, 피부 탄력도, 피부 윤기도, 피부 거칠기 항목에서 유의한 차이를 나타내었다. 12주후 APSA군은 피부 주름, 피부 탄력도 항목에서 vehicle 사용 피검자군에 비하여 유의적인 차이를 나타내었으나 3-APPA군은 피부 탄력도, 피부 주름량, 피부 윤기 항목에서 vehicle군에 비하여 유의적인 차이를 나타내었다. 결론적으로 3-APPA와 APSA 사이에 유의적인 차이가 있지는 않았으나 3-APPA군은 APSA군에 비하여 6주, 12주에서 사용전과 유의한 차이를 나타내는 항목이 많았으며 12주에서 vehicle과 유의적인 차이를 나타내는 항목도 많으므로 3-APPA가 APSA 보다 광범위한 피부노화 억제 효과를 갖는 물질이라고 할 수 있다.

• International Journal of Highway Engineering
• /
• v.4 no.4 s.14
• /
• pp.53-66
• /
• 2002

Asphalt binder characteristics in asphalt mixture are changed due to aging. However. depending upon aggregate and binder used, asphalt mixture dose not show the same level of stiffness and brittleness under the same ageing level. The factors affecting Physical Properties change of the asphalt binder within aged asphalt concrete are not well known and there is limited study which is dealing with this topic This study dealt with evaluation of physical properties of asphalt binder recovered from the mixtures after short-term and long-term aging. Two asphalts. two aggregates. two gradations and four polymers were used to make 32 mixture combinations. The mixtures were prepared and aged artificially in a forced draft oven. The measured physical properties included absolute viscosity, kinematic viscosity and penetration. Statistical analyses were carried out to find out the factor(s) having a significant effect on change of physical property of asphalt binder due to asphalt mixture aging. The results of study shown that aggregate, gradation and polymer had a significant effect on change of physical properties of asphalt binder.

• Composites Research
• /
• v.20 no.2
• /
• pp.1-9
• /
• 2007

To evaluate and investigate the aging characteristics and the structural service lifetime of the CFV(carbon fiber pressure vessel), natural aging tests were carried out using the CFVs, which had been placed and aged at outdoor and indoor laboratories for 10 and 15 years, respectively. To obtain the probabilistic characteristics of ageing characteristics in aged CFVs, inner pressure loading test was conducted with ring specimens taken from aged CFVs. And, to observe the interface morphology of aged CFVs, the micro-photographs were taken by SEM microscope and the fractured interfaces between the carbon fiber and the matrix resin were scrutinized. Based on the Weibull parameters of the tensile failure strain of aged CFVs, the degradation of the 10 and the 15 year aged CFV occur by 19% and 23%, respectively, and the effect of the placement, whether being placed inside the laboratory or not, is not so significant. However, the outer layer protection, such as painting, is found very advantageous to prevent CFV from aging.

• Elastomers and Composites
• /
• v.44 no.4
• /
• pp.397-400
• /
• 2009

Ozone caused the crack on the surface of a rubber article by oxidation of double bond at room temperature. Wax migrates to the surface of a rubber article and makes a physical barrier to prevent process of ozonation. We investigated change of molecular weight distribution of waxes in unfilled NR, SBR, and BR vulcanizates before and after aging at room temperature for 6 months. Migration and evaporation behaviors of wax in a rubber article at ambient conditions help understand a role of wax as an antidegradant and appearance contamination of a rubber article. The relative intensity distribution of n-alkanes of the NR specimen after the aging was shifted to higher molecular weight compared with the relative intensity distribution before the aging, while those of the SBR specimen before and after the aging did not show a big difference.

• Elastomers and Composites
• /
• v.40 no.2
• /
• pp.119-127
• /
• 2005

Material characteristics and lifetime evaluation are very important in design procedure to assure the safety and reliability of the rubber components. In this paper, the material test and accelerated heat aging test were carried out to predict the useful life of NBR and EPDM rubber mount for a compression motor which is used in a refrigerator. In order to investigate the effects of heat-aging on the material properties, crosslink density, modulus at 100% strain, stress-strain curves were obtained from uniaxial and equi-biaxial tensile tests. The change of compression set were used for assessment of the useful life and the time to threshold value were plotted against the reciprocal of absolute temperature to give the Arrhenius plot. The useful life at variable temperatures are obtained in the Arrhenius relationship.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5A
• /
• pp.417-424
• /
• 2010

The dynamic properties of laminated rubber bearings used as isolators in structures could be significantly deteriorated because of the change of microstructure in rubber caused by thermal aging. As a result, a catastrophic failure of bridges and buildings unexpectedly occurs when they are subjected to earthquake attack. Here, the dynamic properties of laminated rubber bearings before and after different of compression-shear loading and repeated cycles loadings, ultimated failure test with thermal aging were first measured and compared to each other. The experimental results, the effects of thermal aging on the shear stiffness, energy absorption, and equivalent damping coefficient of laminated rubber bearings are investigated. It is found that the deterioration of dynamic properties of laminated rubber bearings caused by thermal aging is significant and should be taken into account in designing rubber bearings.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.9
• /
• pp.769-774
• /
• 2016

Epoxy polymer exposed to solar radiation on long-term is required to a long-term environmental test in order to ensure the reliability of operation performance. In this paper, the solar aging experiment is performed for 7, 14, 28, 56, and 84 cycles, using solar simulator designed according to MIL-STD-810. After the aging experiment, measuring RGB values and using the CIE1976 color space, each RGB decreasing rates and total color shift are calculated. In addition, using a universal testing machine, mechnical properties according to ASTM-D638 are measured. As a result, by increasing solar aging period, total color shift is increased, and the tensile strength and elongation are decreased, but the elastic modulus and the poisson's ratio are slightly changed.

• Journal of the KSME
• /
• v.43 no.6
• /
• pp.62-65
• /
• 2003

이 글에서는 가속 열노화시험을 통하여 노화수명을 예측하고 방법을 고무 재료의 수평 선도와 유한요소해석 결과로 부터 고무부품의 피로숙명을 예측하여 신뢰성을 평가하는 방법을 소개하였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.5
• /
• pp.368-376
• /
• 2005

Coolant rubber hoses for automobile radiators can be degraded and thus failed due to the influence of contacting stresses of air and coolant liquid under thermal and mechanical loadings. In this study, for EPDM(ethylene-propylene diene monomer) rubber conventionally used as a radiator hose material the aging behaviors of the skin part due to thermo-oxidative and electro-chemical stresses were nondestructively evaluated. Through the thermo-oxidative aging test, it was shown that the surface hardness IRHD(International Rubber Hardness Degrees) of the rubber increased with a considerable reduction of failure strain. On account of the penetration of coolant liquid into the skin part the weight of rubber specimens degraded by electro-chemical degradation(ECD) test increased, whereas their. failure strain and IRHD hardness decreased largely. The penetration of coolant liquid seemed to induce some changes in inner structure and micro hardness distribution of the rubbers. Consequently, EPDM rubbers degraded by thermo-oxidative aging and ECD could be characterized nondestructively by micro-hardness and chemical structure analysis methods.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.595-601
• /
• 2020

During the safety inspection of nitrocellulose-made explosive containers stored for more than 10 years, cracks were found in the containers. Therefore, a failure cause analysis test was performed. First, the cause of failure through the failure tree analysis was conducted to select the factors that influenced failure. The changes in the properties of the container caused by the acceleration of the reaction were found to be the cause of the failure by confirming the influence on the environment and internal/external factors that may occur during storage. To confirm this, environmental tests, such as thermal shock test and vacuum thermal stability test, were performed using a naturally aged container to analyze the cause of failure, and an accelerated aging test was performed to reproduce the failure. Through this, the chemical reaction was accelerated by heat and charge, as in the result of the fault tree analysis, and it was confirmed that the physical properties of the container were changed. In addition, the service life of the container was estimated using the Arrhenius model for the storage life due to thermal aging.