• Journal of Oral Medicine and Pain
• /
• v.38 no.2
• /
• pp.121-136
• /
• 2013

It has been known that saliva may affect the most of oral diseases. On the contrary, several systemic conditions may affect salivary flow and cause oral dryness and psychosocial stress especially may a crucial role in the etiology of hyposalivation and oral dryness. Many studies have focused on macroscopic effects of the stress on the salivary glands by autonomic response, but on the other hand it has hardly been reported on cellular microscopic effects of the stress on the salivary glands. Therefore, this study was performed to examine clusterin, a antiapoptotic and cytoprotective protein, in the parotid glands under restraint stress condition. For this study, 18 rats were divided into 3 groups; 1) 2 rats of group I were selected as a normal control. 2) 2 rats of group II, as a experimental control were placed in the restraint cone for 2 hours 3) 14 rats of group III were placed in the restraint cone for 2 hours once a day. The rats were sacrificed immediately(group II, as a experimental control), 1, 2, 3, 4, 5, 6 and 7 days after application of the stress and the both parotid glands were excised. Immunohistochemistry and electron microscopy were performed. The finding were as follows: 1. In parotid glands, repeated stress denaturalize the acinar cells, interacinous tissues and interacinous connective tissues were separated to individual acinar cells. After 4 days of experiment, there were lots of vacuoles and intercalated ducts. 2. In parotid glands, repeated stress make the rER which is in acinar cells swollen after 3 days of experiment and it was intensified to 4 days. After 5 days of experiment the edema got worse and degenerated. 3. In parotid glands, clusterin was reduced in ductal cell cytoplasm but in intercalated duct clusterin was slightly stained until 3 days prominently increased until 4 days and then decreased again after 5 days of experiment.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.2
• /
• pp.144-152
• /
• 2004

The aim of this study was to evaluate the resistance to degradation of three commercial compomers in an alkaline solution. Dyract(Dentsply), Elan(Kerr) and F-2000(3M) polyacid modified resin composites(compomers) were used in this study. The resistance to degradation was evaluated on the basis of mass loss(%), degradation $depth({\mu}m)$ and Si, Al, Ba loss(ppm). The results were as follows : 1. The mass loss of each brand was $1.42%{\sim}2.14%$ and there was no statistically significant difference of mass loss among Dyract, F2000 and Elan. 2. The degradation layer depth of each brand was $182.92{\sim}227.7{\mu}m$ and there was no statistically significant difference of degradation layer depth among Dyract, F2000 and Elan. 3. There was statistically significant differences in Si-loss and Al-loss among three compomers (p<0.05). Si loss was the highest value in Dyract and Al loss was the highest value in F2000. 4. There was statistically significant correlation between mass loss and degradation layer depth (r=0.60, p<0.05). 5. In SEM finding, there was some destruction of compomer matrix-filler interface in post-exposure specimen to NaOH solution. As the matrix decreased, the filler particles distinguished and the periphery of the filler particles appeared whitish color due to degradation.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.2
• /
• pp.290-298
• /
• 2004

In children, change in lifestyles such as an increase in participation of physical activities has increased the chance of receiving an injury, harming the child and their parents. This study was carried out to give basic information of traumatic injuries to the upper anterior teeth which can be used in prevention of future complications that may arise. From June, 2002 to May, 2003, of the 8,799 children in their primary and mixed dentition visiting Department of Pediatric Dentistry, College of Dentistry, Yonsei University 955 upper anterior teeth(primary 543, permanent 412) of 487 children(male 316, female 171) with traumatic injures to the upper incisors were studied. The results were as follows: 1. Trauma to the primary teeth prevailed at the age of 1-3 and to the permanent teeth at the age of 7. The male to female ratio was 1.85:1. 2. Trauma to the upper incisors for both the primary and permanent teeth occurred in the afternoon. Primary teeth were injured most frequently in the home(44.1%) and the permanent teeth outdoors, in the street(17.5%). 3. Both the primary and permanent teeth were most injured by fall-down injuries(39.8%, 12.9%), and next were collisions(22.2%, 6.0%). For the primary teeth, high fall, traffic accident, violence and sports are next in order, and for the permanent teeth, violence, sorts, traffic accidents were next. 4. Average number of 1.6 primary teeth and 2.8 permanent teeth were injured with the right central incisor most prevailing. 5. Crown fracture without pulpal exposure and subluxation injures were highest in frequency in both the primary and permanent teeth.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.9 no.1
• /
• pp.21-28
• /
• 2006

Since the usage of tributyltin(TBT) has been banned, many chemicals including Sea-Nine 211, Cu-pyrithione, and Zn-pyrithione were developed to use as antifouling agents for ships and coastal structures. However, the toxicity of these antifouling chemicals have not been systematically evaluated in ecotoxicological and biological studies. In this study, we investigated the effect of four antifouling substances on survival of estuarine rockfish, Sebastes schlegeli and amphipod, Monocorophium acherusicum. Survival of S. schlegeli and M. acherusicum during the 96-h exposure period were used to estimate the median lethal concentrations(LC50s) of test chemicals for each test species. Among antifouling agents, Cu-pyrithione($56{\mu}g{\cdot}1^{-1}$;96-h LC50) was most toxic to S. schlegeli, followed by $TBT(73{\mu}g{\cdot}1^{-1}),\;Sea-Nine(184{\mu}g{\cdot}1^{-1})\;and\;Zn-pyrithione(l707{\mu}g{\cdot}1^{-1})$, while TBT($26{\mu}g{\cdot}1^{-1}$) was most toxic to M. acherusicum followed by Sea-Nine($49{\mu}g{\cdot}1^{-1}$), Cu-pyrithione($119{\mu}g{\cdot}1^{-1}$) and Zn-pyrithione($334{\mu}g{\cdot}1^{-1}$). Effect concentrations of the antifouling chemicals estimated in this study can be used when assessing the potential risks of these substances, of which usage is increasing in the coastal environment.

• Restorative Dentistry and Endodontics
• /
• v.26 no.5
• /
• pp.409-417
• /
• 2001

The purpose of this study was to investigate the influence of light irradiation over self-priming adhesive on dentin bonding. After acid etching the exposed dentin, a self-priming adhesive (Prime&Bond$^{\circledR}$NT dental adhesive system Dentsply DeTrey, GmbH, Konstanz, Germany) was applied and light irradiation was done for 20 sec with regular intensity (600 mW/$\textrm{cm}^2$) in group I and for 3 sec with ultra-high intensity (1930 mW/$\textrm{cm}^2$) in group III. No light irradiation was done over self-priming adhesive in groups II and IV. Composite resin was added on the self-priming adhesive and irradiated for 40 sec with regular intensity (600 mW/$\textrm{cm}^2$) in groups I and II and for 3 sec with ultra-high intensity (1930 mW/$\textrm{cm}^2$) in groups III and IV. To see the effect of light curing time on dentin bonding, another 3 group specimens were prepared. Without light-irradiation over self-priming adhesive, added composite resin was irradiated for 3, 6, or 12 sec with ultra-high intensity light. After bonded specimens were stored in 37$^{\circ}C$ distilled water for 24 hours, shear bond strength were measured using a universal testing machine (4202, Instron, Instron Co., U.S.A.) and fractured surfaces were examined under a stereomicroscope (SZ-PT Olympus, Japan). Statistical analysis were done with one-way, two-way ANOVA and chi-square test. The results were as follows : 1. The shear bond strengths from the groups irradiated over self-priming adhesive were significantly higher than those from the groups without irradiation (p<0.05). 2. There was no significant shear bond strength difference between regular intensity light irradiation groups and ultra-high intensity ones (p>0.05). 3. There was no significant shear bond strength difference among various irradiation time groups with ultra-high intensity ones (p>0.05). 4. In stereomicroscopic examination of fractured surfaces, adhesive-cohesive mixed failure mode was mostly seen in all groups, and there was no significant difference in failure mode among groups (p>0.05).

• Korean Journal of Heritage: History & Science
• /
• v.52 no.4
• /
• pp.170-183
• /
• 2019

Fiber scutching refers to the process of extracting fibers from plants by separating or extracting fibers from the raw materials. As the definition of the term implies, the "Fiber Scutching" is performed on plants with advanced bast fiber as the primary material processing technique performed on plant materials. Some of the most popular phosphorus plants are ramie, hemp, flax, and the paper mulberry, which have a long history of cultivation and a wide range of distribution, making them very universal as a material supporting human life and culture. This study was described in Oju-yeonmunjangjeon-sango but was designed to re-examine the method of breaking dried stalks, which is currently unused in Korea, to examine the feasibility and characteristics of the technology. As a result of sampling and experimenting with hemp bast using the method recorded in the literature, hemp fiber was actually produced. The criteria for removing the shell from the hemp stem were the degree of discoloration and drying, and only when the stalk was completely discolored to yellow could segregation of the stalk from the shell be performed. The amount of sunlight and temperature were conditions that accelerated drying. However, if exposed for a long time, it is confirmed that hemp bast will be in a suitable condition to process, regardless of the amount of sunlight and temperature. 'Breaking of dried stalks', which utilizes the physical power of 'threshing with a flail' is considered a core process of the fiber scutching technique in 'Yukjin' in Hamgyeong-do. The bark and the core of the hemp were separated by tapping, the bast was thinly split, and the shell was peeled off, making it suitable for collecting with thread. The method of collecting the fibers by applying physical power causes downing on the fibers, which is to be generally avoided in the manufacture of bast fabric woven hemp or ramie. However, Hamgyeong-do's fiber scutching method seems to have applied this principle to the method of making fragile fabrics by using it in reverse. This method is distinct from the steaming or boiling of the stalks' in Andong, Korea, and it is similar to the Western method of spinning fabrics.

• Journal of Korean Ophthalmic Optics Society
• /
• v.13 no.2
• /
• pp.1-7
• /
• 2008

Purpose: This study was performed to evaluate the changes of lens morphology and tear stability during wearing soft contact lenses (SCLs) which were kept in drying condition like dry eye or became to be dried due to heedless care. Method: SCLs having different water content, thickness or material were rehydrated after being dehydrated artificially 2 or 4 times, and estimated their diameter and radius. Furthermore, the changes of tear film break-up time (TBUT) during SCL wearing were also measured. Result: Due to the dryness, the diameter of both 70% water content SCL and 59% water content SCL decreased, but the decrement was larger in 59% water content SCL. The more 59% water content SCL was dehydrated, the more its radius changed. However, the radius of 70% water content SCL did not change by 2 times dehydration and increased greatly by 4 times dehydration. The reduction of diameter of -1.00 D SCL was greater than that of -9.00 D SCL. Moreover, the radius of -1.00 D SCL increased depending on the frequency of dehydration but that of -9.00 D SCL did not changed. The diameter and radius changes of lotrafilcon B, silicone hydrogel lens, were less than those of hilafilcon B, copolymer of HEMA and N-vinyl pyrrolidone. TBUT during wearing SCLs decreased by wearing dehydrated SCLs. Conclusion: The diameter and radius of dehydrated SCLs as well as TBUT during wearing them were changed in spite of rehydration, which would be the important cause of uncomfortable feeling when people wore dehydrated SCL. The changes of SCL morphology and TBUT differed according to the water content, lens thickness and material.

• Journal of Korean Society of Environmental Engineers
• /
• v.39 no.11
• /
• pp.634-640
• /
• 2017

Toxicity and fate assessment is necessary in the evaluation of the environmental, health and safety risks of engineered nanomaaterials (ENMs). Therefore, in order to ensure the reproducibility, reliability and relevance of ENMs toxicity results, stable and monomodal dispersion protocols in toxicity test media are needed. Zinc oxide nanoparticles (nZnO) are widely used in various products such as cosmetic products, paper, paints etc. In this study, nZnO dispersions in ecotoxicity test media were produced by following a series of steps of modified National Institute of Standards and Technology (NIST) Special publication 1200-5. In addition, natural organic matter (humic acid (HA)) was used as a stabilizing agent to disperse nZnO in the test media. The hydrodynamic diameters (HDD) of the nZnO in dispersion ranged between 150 and 200 nm according to the dynamic light scattering (DLS) measurement. Based on these dispersions in ecotoxicity test using ecological species (Oryzias latipes, Daphnia magna, Pseudokirchneriella subcapitata and Chironomusus riparius), dispersion protocol was found to have a considerable potential in ecotoxicity test of ENMs.

• Restorative Dentistry and Endodontics
• /
• v.30 no.2
• /
• pp.112-120
• /
• 2005

This study was done to evaluate whether there were any differences in microleakage of class V composite restorations according to restoration site and cavity size. Total sixty-four restorations were made in molar teeth using Esthet-X. Small ($2\;{\times}\;2\;{\times}\;1.5\;mm$) and large ($4{\times}2{\times}1.5\;mm$) restorations were made at the buccal/lingual surface and the proximal surface each. After 1,000 times of thermocycling ($5^{\circ}\;-\;55^{\circ}C$), resin replica was made and the percentage of marginal gap to the whole periphery of the restoration was estimated from SEM evaluation. Thermocycled tooth was dye penetrated with $50\%$ silver nitrate solution. After imbedding in an auto-curing resin, it was serially ground with a thickness of 0.25 mm. Volumetric microleakage was estimated after reconstructing three dimensionally. Two-way ANOVA and independent T-test for dye volume, Mann-Whitney U test for the percentage of marginal gap, Spearman's rho test for the relationship between two techniques were used, The results were as follows : 1. The site and size of the restoration affected on the microleakage of restoration. Namely, much more leakage was seen in the proximal and the large restorations rather than the buccal/lingual and the small restorations. 2. Close relationship was found between two techniques (Correlation coefficient = 0.614/ P = 0.000). Within the limits of this study, it was noted that proximal and the large restorations leaked more than buccal/lingual and the small restorations. Therefore, it should be strictly recommended large exposure of margins should be avoided by reducing unnecessary tooth reduction.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.2
• /
• pp.65-74
• /
• 2013

A research program for the roe deer (Capreolus pygargus) has been set up at the Jeju Experimental Forest of Warm-temperate and Subtropical Forest Research Center in Jeju Island. To explore the home range size and habitat environment, 3 males and 3 females have been captured and released with GPS-CDMA based telemetry since 24th April 2012. Among them 2 females were captured at Hannam Forest of Seoguipo, were pregnant and monitored by the tracking system. There are significantly different patterns in behavior around the parturition. After parturition they show recurrence behavior toward one point in the forest, while they have irregular patterns in moving before. To calculate the home range size, the MCP (minimum convex polygon) and Kernel Method are applied through the extension of ESRI ArcView GIS 3.2a. The pregnant female captured 9th May 2012 has the size of MCP=67ha and Kernel 95%=0.5ha and the pregnant female captured 12th July 2012 has the size of MCP=82ha and Kernel 95%=0.9ha. Although a fawn could move immediately just after the birth likely others to avoid any risks, they stay at very narrow space significantly, and the size become wider when more time goes by. Furthermore, they mainly have a home range away from human activity area such as forest tracking roads. The habitat environment for the parturition is summarized as 40years old cryptomeria forests with new sprouting shrubs for foods, which are the controlled forest through the thinning and removing shrubs 2 years ago. This means that forest works could cause positive results for the parturition and survival of young. The period of parturition is earlier than highland in Jeju Island, the size of home range is narrower than other countries, and the habitat environment of the shelter for a fawn is similar to previous research in other countries.