• 한국체육학회지인문사회과학편
• /
• v.54 no.5
• /
• pp.727-737
• /
• 2015

The study investigated the relationship between vitamin D status and lifestyle risk factors in office workers. A total of 515 office workers(336 men and 179 women) aged 30 years or older were voluntarily recruited from S-city. Along with serum vitamin D levels, lifestyle risk factors including obesity index, physical fitness, metabolic risk factors, lipids profile and sedentary behavior were measured using standardized protocols. Subjects were classified as deficiency (<20ng/mL), insufficiency (20-29ng/mL), and sufficiency (≥30ng/mL) based on serum vitamin D levels. Linear contrast analysis using one-way ANOVA showed significant linear decreases in mean body fat (p=.030) and sedentary behavior (p<.001) and significant linear increases in skeletal muscle (p=.037), cardiorespiratory fitness (p<.001) and HDL-C (p=.013) across incremental serum vitamin D levels. Compared with the low cardiorespiratory fitness group, the high cardiorespiratory fitness group had a significantly higher odds ratio (men OR=2.144, p=.042, women OR=1.971, p=.045) for having vitamin D insufficiency or deficiency even adjustment after age. Compared to the shortest sitting time group, the longest sitting time group had a significantly higher odds-ratio in a group of female office workers (OR=1.262, p=.043) for having vitamin D insufficiency or deficiency even adjustment after age. The current findings of the study showed that poor physical fitness and sedentary behavior were the risk factors of low serum vitamin D levels, implying the urgent need for a healthy lifestyle modification along with vitamin D supplementation.

• The Korean Journal of Pesticide Science
• /
• v.16 no.4
• /
• pp.343-349
• /
• 2012

Exposure and risk assessments were conducted to evaluate the relative safety of mixing/loading work of indoxacarb between wettable powder (WP) and water dispersible granule (WG). Hand exposure was monitored using cotton gloves while inhalation exposure was measured using personal air monitor. Method validation for the exposure monitoring was established successfully through several experiments. Limit of determination and limit of quantitation were 0.25 and 1 ng, respectively. $R^2$ of calibration curve linearity was more than 0.9999 and reproducibility was 0.7-6. Recovery of indoxacarb from gloves, solid sorbent and glass fiber filter at three different levels was 81.5-108.8%. Trapping efficiency and breakthrough tests gave 981.5-108.8% of recovery. During mixing/loading procedure, hand exposure amount (75 percentile of 30 repetitions) for indoxacarb WP was 6 folds (459.8 mg/kg a.i) than that of WG (81.4 mg/kg a.i). This result indicates that WG has less drift than WP thanks to its granular type of formulation. Inhalation amount was $10^{-8}-10^{-7}%$ of spray mixture prepared and $10^{-4}-10^{-3}%$ of hand exposure. In inhalation case, no significant differences were observed between two formulations. Margin of safety was calculated for risk assessment using male Korean average body weight and acceptable operator exposure level as the important exposure factors. Mixing/loading procedures for both of the formulations were considered to be of least risk because calculated MOS values were more than 1.

• The Journal of Engineering Geology
• /
• v.27 no.3
• /
• pp.275-292
• /
• 2017

Large landslides have occurred more than 100 times each year by the influence of cyclones and torrential rain each year in Vietnam. Nevertheless, they $don^{\circ}$Øt have a scientific management system to prevent the landslide disaster in advance. In this study, we acquisited the risk factor and damage factor about each slope throughout basic survey at Hoang Sa Costal Road, Danang and at Ho Chi Minh Road, Quangnam. The priority of investigation technique considering of the exposure characteristics of the road slope in Vietnam developed by the empirical analysis with the acquired data. As a result, we can set the foundation of scientific management for the road slope management system in Vietnam.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.35 no.2
• /
• pp.150-156
• /
• 2015

In this study, the effects of different mix proportions and fire scenarios (exposure temperatures and post-fire-curing periods) on fire-damaged concrete were analyzed using a nonlinear resonance vibration method based on nonlinear acoustics. The hysteretic nonlinearity parameter was obtained, which can sensitively reflect the damage level of fire-damaged concrete. In addition, a splitting tensile strength test was performed on each fire-damaged specimen to evaluate the residual property. Using the results, a prediction model for estimating the residual strength of fire-damaged concrete was proposed on the basis of the correlation between the hysteretic nonlinearity parameter and the ratio of splitting tensile strength.

• Journal of the Korean Society of Radiology
• /
• v.12 no.1
• /
• pp.79-83
• /
• 2018

In this paper, we measured and analyzed the dose correction factor, absorbed dose linearity, peak voltage X-ray response, angular dependence. Exposure dose correction factor, absorbed dose linearity, and peak voltage linearity using the medical X-ray generator were all in accordance with IEC-62387-1 (2007). The reference to the dosimetry direction at 0, 30, and 60 degrees relative to baseline radiation exposure was -29% (${\pm}30^{\circ}$) and + 67% (${\pm}60^{\circ}$). The values measured at $30^{\circ}$ were -8% lower than the standard and -18% lower than the standard at $60^{\circ}$. Therefore, the effect of direction should be corrected when using OSL dot dosimeter.

• Journal of radiological science and technology
• /
• v.44 no.3
• /
• pp.173-181
• /
• 2021

The purpose of this study was to reduce dose while maintaining image quality during digital radiographic examination of paranasal sinus by using the automatic exposure control (AEC) system. The tube voltage was set as six stages that increased by about 10 kVp to 70 kVp, 81 kVp, 90 kVp, 102 kVp, 109 kVp and 117 kVp. And then the AEC system conditions were consisted of 9 setting environments, that change mode of the sensitivity (S200, S400, S800) and the density (+2.5, 0, -2.5). We measured automatically exposed tube current (mAs) under 54 conditions with combined these, and assessed SNR and PSNR through the acquired images. In addition, four radiologists performed a qualitative assessment of the acquired images for each combination on a five-point scale of the Likert. As a result, the lowest dose and the highest values of SNR and PSNR in images with a qualitative assessment more than 4 point were the AEC control factors of 90 kVp, S800, D2.5. We applied this condition to the clinical trial, it showed an effect of 83.1% reduction in exposure radiation dose (mR). Therefore, AEC system could be used as dose reduction technology if it understood and used related regulatory factors and physical characteristics.

• Journal of radiological science and technology
• /
• v.44 no.1
• /
• pp.1-8
• /
• 2021

The purpose of this study was to analyze the effect of automatic exposure control (AEC) control factors in digital radiography systems based on the fine contrast images using coin phantoms. The AEC control factors were targeted at the range of dominent zone, sensitivity, and density. The dominent zone was divided into cases where a single coin was used to cover the field configuration, and cases where seven coins were used to cover the field configuration. The sensitivity was classified into three stages (200, 400, 800) and the density was classified into three stages (2.5, 0, 2.5). Image quality was evaluated by signal to noise ratio (SNR) and contrast to noise ratio (CNR). Then, the automatically exposed tube current was measured. As a result, the X-ray image of seven coins obtained a result value of about 1.2 times higher for SNR and 1.9 times higher for CNR than the X-ray image for one coin. The tube current was also about 1.6 times higher. In conclusion, In AEC, the higher the field configuration and dominent zone are matched and the higher the density, the lower the sensitivity, which increases the tube current and CNR, which increases the image quality. Therefore, it is judged that the appropriate setting of the range of dominent zone, sensitivity, and density of the control, which is the AEC control factor, could improve the fine contrast of images.

• Journal of East-West Nursing Research
• /
• v.29 no.2
• /
• pp.161-171
• /
• 2023

Purpose: The purpose of this study is to verify the effectiveness of the Environmental Hazards Exposure Prevention Program for Mothers with Young Child (EHEPP-MYC) and to provide basic data for environmental health projects in the community. Methods: EHEPP-MYC was developed based on the protection motivation theory. A quasi-experimental design was applied to evaluate the effectiveness of the program. The number of study participants was 30 in the experimental group and 31 in the control group. The intervention applied to the experimental group consisted of lectures as the main method, current affairs programs, discussions, booklets, animations, and practical training. The program was held twice a week for a total of 4 sessions of 60 minutes each. The effect of applying the program was measured three times through surveys (before, immediately after, and two weeks after the intervention) and analyzed through repeated measures ANOVA. Results: The EHEPP-MYC had significant effects on preventive behavior, perceived severity, perceived vulnerability, self-efficacy, response efficacy, and response costs at three time points. Conclusion: EHEPP-MYC has been shown to be effective in promoting environmental hazards prevention behaviors among mothers of young child. EHEPP-MYC can be used as baseline data for projects developing programs to prevent exposure to environmental hazards and improve the environmental health of communities.

• Journal of Bio-Environment Control
• /
• v.24 no.3
• /
• pp.226-234
• /
• 2015

To provide the data necessary to determine exposure coefficients used for calculating the snow load acting on a greenhouse, we compared the exposure coefficients in the greenhouse structure design standards for various countries. We determined the exposure coefficient for each region and tried to improve on the method used to decide it. Our results are as follows: After comparing the exposure coefficients in the standards of various countries, we could determine that the main factors affecting the exposure coefficient were terrain roughness, wind speed, and whether a windbreak was present. On comparing national standards, the exposure coefficients could be divided into three groups: exposure coefficients of 0.8(0.9) for areas with strong winds, 1.0(1.1) for partially exposed areas, and 1.2 for areas with dense windbreaks. After analyzing the exposure coefficients for 94 areas in South Korea according to the ISO4355 standard, all of the areas had two coefficients (1.0 and 0.8), except Daegwallyeong (0.5) and Yeosu (0.6), which had one coefficient each. In South Korea, the probability of snow is greater inland than in coastal areas and there are fewer days with a maximum wind velocity > $5m{\cdot}s^{-1}$ inland. When determining the exposure coefficients in South Korea, we can subdivide the country into three regions: coastal areas with strong winds have an exposure coefficient of 0.8; inland areas have a coefficient of 1.0; and areas with dense windbreaks have an exposure coefficient of 1.2. Further research that considers the number of days with a wind velocity > $5m{\cdot}s^{-1}$ as the threshold wind speed is needed before we can make specific recommendations for the exposure coefficient for different regions.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.23 no.6
• /
• pp.45-52
• /
• 2019

Steel corrosion due to carbonation in RC (Reinforced Concrete) structures easily occurs in urban cities with high CO₂ concentration. RC structures are always subjected to external loading with various boundary conditions. The induced stress level causes changes in diffusion of harmful ion like CO₂. In this work, a quantification of carbonation progress with stress level is carried out and carbonation prediction is derived through the relations. Determining the design parameters like cover depth, CO₂ diffusion coefficient, carbonatable materials, and exterior CO₂ concentration as random variables, service lifes under carbonation with design parameter's variation are obtained through MCS(Monte Carlo Simulation). Additionally the service life with different stress level is derived and the results are compared with those from deterministic method. Cover depth and cement hydrates are evaluated to be very effective to resist carbonation, and the proposed method which can consider the effect of stress on service life can be applied to maintenance priority determination.