Transactions of the Korean Society of Mechanical Engineers B
/
v.35
no.10
/
pp.1061-1066
/
2011
In this study, the flow characteristics of an injection nozzle installed in a high-pressure holder for improving productivity were determined. The inlet velocity, nozzle inflow angle, and nozzle outlet diameter were selected as design factors having an influence on the flow characteristics, and numerical analysis was conducted for these factors. As the inlet velocity is high and the nozzle outlet diameter is small, the pressure and velocity of the injected flow are high. In the case of the nozzle inflow angle, the variation of flow characteristics according to angle was slight, but the highest pressure and velocity were found at $15^{\circ}$. In addition, the possibility of chip elimination by the injected flow was analyzed on the basis of the numerical results.
Journal of the Korean Society for Aeronautical & Space Sciences
/
v.36
no.9
/
pp.898-906
/
2008
A tested turbine consists of two stages, and an axial-type and a radial-type turbine are applied to the first and second stage, respectively. The mean diameter of the axial-type turbine rotor is 70 mm, and the outer diameter of the radial-type turbine is 68mm at the inlet. In this experiment, an axial-type turbine, two different radial-type turbines, and three different nozzle flow angles are applied to find the optimal design parameters. To compare the turbine performance, the net specific output torque is evaluated. The test results show that the nozzle flow angle on the first stage is a more important parameter than other design parameters for partially admitted small turbines to obtain high operating torque. For a 3.4% partial admission rate, the net specific output torque is increased by 13% with the addition of a radial-type rotor to the second stage when the turbine operates at $75^{\circ}$ nozzle flow angle.
Journal of Advanced Marine Engineering and Technology
/
v.36
no.8
/
pp.997-1002
/
2012
Emission regulations have been strengthened step by step for marine engines. A noble measure is required both inside and outside of the combustion chamber. The combustion characteristics in cylinder have a very close relationship with the exhaust emission characteristics. Injection valve and nozzle hole geometry is an important factor for combustion. The study to improve the spray characteristics has concentrated on nozzle inlet geometry and nozzle hole diameter, but the exit geometry has not considered. In this study the nozzle exit angle variation was tested. The results show that the angle between $30^{\circ}$ and $60^{\circ}$ is more effective than the other cases.
Proceedings of the Korean Society of Propulsion Engineers Conference
/
1999.04a
/
pp.15-15
/
1999
2차 유동 분사에 의한 추력 방향 제어 방법은 복잡한 기계적 작동장치와 이에 따른 무게의 증가를 배제할 수 있다. 본 연구에서는 유동 해석을 통하여 2차원 및 3차원 초음속 수축-팽창 노즐 유동에 2차 유동을 분사하여, 2차 유동의 분사 위치, 분사 유량 및 분사 각도 등이 추력의 방향 및 크기에 미치는 영향을 밝혀 추력 방향 제어를 위한 최적의 2차 분사 조건을 제시하였다. 유동 해석 결과 2차 유동의 분사 위치는 생성된 경가 충격파가 노즐 출구까지 분포되는 지점이 최대 전향각과 횡추력을 가지는 분사위치임을 알 수 있었고, 분사 각도는 주 유동의 역방향으로 분사하는 것이 수직방향으로 분사하는 것보다 더 큰 전향각을 얻을 수 있었다. 또한 2차원의 경우보다 3차원 유동에서 큰 전향각이 생김을 알 수 있었다.
Journal of the Korean Society of Fisheries and Ocean Technology
/
v.27
no.4
/
pp.255-265
/
1991
In order to find the excavating performance of water-jet nozzle on the sand, the authors were carried out the excavating experiment with the model nozzles which were semi circular sectioned nozzles and rectangular nozzle in water tank. The results were as follows. 1) Excavating maximum depth and width on the sand by the water jet were straightly increased in proportion to the velocity of water jet and the section area of nozzle, and that, by the nozzle distance from the excavating point on the sand, the depth was decreased, while the width was increased straightly. 2) Rectangular nozzle which the thick of hole is 1mm, was a little bit better than the circular nozzle of the same sectioned area on the excavating performance. 3) Empirical equations between the velocity of water jet, the distance of nozzle, and the maximum excavating depth and width by angle of nozzle were expressed as linear, they were as follows on the 45$^{\circ}$ angle of the rectangular nozzle(1$\times$12mm); D=0.0093V sub(0)-0.23H+5.7. W=0.0147V sub(0)+1.06H+10.2. where, D is the maximum excavating depth(cm), W is the maximum excavation width(cm), V sub(0) is the velocity of water jet(cm/s); 926$\leq$V sub(0)$\leq$1504, H is the distance(cm) from nozzle tip to water-jetted point on the surface of sand.
Kim, Chang-Seop;Yu, U-Jun;Gwon, Seong-Pil;Yeom, Mun-Cheon;Kim, Chang;Han, Yong-Taek
Proceedings of the Korea Institute of Fire Science and Engineering Conference
/
2013.11a
/
pp.229-229
/
2013
본 연구에서는 미세 물분무 노즐의 소화성능을 분석하기 위해 유량계수, 방사거리, 방사각도, 그리고 작동압력에 따라 분사되는 물입자 크기를 측정하였다. 이를 위해서 이중 구조의 미세 물분무 노즐 LPN-61과 LPN-63을 제작하였으며, 미분무 소화설비를 구성하여 이중구조 노즐의 형상에 따라서 유동특성을 정량화하였다. 그 결과 LPN-61은 유량계수 5.116, 방사각 $120^{\circ}{\sim}125^{\circ}$로 작동압력이 $4kgf/cm^2$에서 $10kgf/cm^2$까지 증가함에 따라서 SMD는 $127{\mu}m$정도에서 $88{\mu}m$까지 입자 크기가 감소하였으며, LPN-63은 유량계수 5.121, 방사각도 $120^{\circ}{\sim}125^{\circ}$로 동일한 작동압력 범위에서 SMD는 $108{\mu}m$에서 $80{\mu}m$까지 감소하는 것을 확인하였다.
Proceedings of the Korean Society of Propulsion Engineers Conference
/
1998.10a
/
pp.33-33
/
1998
2차 유동 분사에 의한 추력 방향 제어 방법은 기존의 기계적인 장치를 이용한 방향제어 방법에 비해 부가적인 복잡한 기계적 작동장치와 이에 따른 무게의 증가를 배제할 수 있다. 본 연구에서는 전산 유동해석을 이용하여 2차원 초음속 수축-행창 노즐 유동에 2차 유동을 분사하여, 2차 유동의 분사우치 및 분사 유량 및 분사 각도 등이 추력의 방향 및 크기에 미치는 영향을 밝혀 이들 상호간의 상관관계를 구하여 추력 방향 제어를 위한 최적의 2차 분사 조건을 제시하였다. 유동 해석 견과 2차 유동의 분사 위치는 생성된 경사 충격파가 노즐 출구까지 분포되는 지점이 최대 전향각과 횡추력을 가지는 분사 위치임을 알 수 있었다
The one of basic functional conditions of suspended overhead sprayer, which is openly made use of irrigating on bedding plants in greenhouse, is to be kept the growing uniformity of bedding plants by making uniformly the spraying irrigation depending on the distribution of sprayed water. This study was performed to find out the optimum position of sector formed injection nozzle which is placed from the top of plant 0 the tip of the nozzle to keep spraying uniformity. The test of spraying distribution using a overhead sprayer, which was installed in a row of sector formed injection nozzles, was performed The measuring factor to represent spraying distribution was the water weight filled in each cup when the overhead sprayer was moving across the upside of the cups which were placed directly under the nozzles on keeping the distance from nozzle tip. The test results were as following , The standard mr of weights of each cup filled with spraying water was lower values at Position far from more than 60cm under nozzle tip. The driving speed variation of sprayer was not effected on spraying uniformity but the spraying water weight was inversely proportioned to the speed. To make best spraying uniformity, it was represented that the tip of the nozzle is positioned to keep the distance which the top of plants is placed at the second cross point of each injection sector of nozzles.
한국은 급격한 고령화가 진행 중에 있다. 세계적으로도 유례가 없는 급격한 고령화에 노인시설 및 병원에서 생활하는 고령자의 수 역시 증가하고 있는 추세이다. 시설이나 병원에서 고령자의 샤워수발은 수발자에게는 매우 힘든 노동이 되고 있다. 따라서 본 연구에서는 샤워 수발자의 불편함을 해소할 수 있는 와상형 자동 샤워링 시스템을 개발하는 것을 연구목적으로 한다. 와상형 자동 샤워링 시스템을 개발하기 위하여 본 연구에서는 기존 국외제품의 노즐위치 문제점을 분석하고, 수발자의 수발행위가 최적화될 수 있는 최적노즐위치 구현을 위한 샤워링 테스트, 샤워링시뮬레이션 등을 사용하여 최적노즐위치를 구현하였다. 또한 적은 노즐 수로 넓은 범위를 효과적으로 세정할 수 있는 스윙노즐을 개발하여 시제품에 적용하였다. 샤워링 테스트의 노즐위치 최적화결과를 샤워링 시뮬레이션에 적용하여 노즐위치 및 분사각의 최적화를 수행하였고, 이를 실제 시제품 설계에 적용하였다. 본 연구에서는 와상형 샤워링 시스템의 개발에 있어 사용자의 수발부담을 경감할 수 있는 가장 중요한 설계요소를 노즐위치 및 분사각으로 정의하고, 노즐위치 및 분사각도의 최적화를 중심으로 와상형 자동샤워링 시스템 개발 연구를 수행하였다. 본 연구의 사용자 중심 제품개발과정은 앞으로 다양한 고령친화제품을 개발하는데 있어 수발자의 부담을 감소시키고, 고령사용자의 자립생활을 지원하는데 있어 적용 가능할 것으로 사료된다.
본 논문에서는 비데용 물 분사 노즐의 내부유동을 가시화하기 위해서 여러 가지 설계변수에 관한 연구가 수행되었다. 특히 물 분사에 만 의존했던 과거의 세정시스템과는 달리 물과 공기를 혼합해서 물도 절약하고 세정의 효과도 높이고자 하는 기술을 개발하고자 했다. 상용코드인 CFD-ACE+를 이용하여 내부유동 특성을 관찰했고 여러 가지 인체 공학적인 설계가 되도록 다양한 각도에서 검토되었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.