• International Journal of Highway Engineering
• /
• v.9 no.3
• /
• pp.51-62
• /
• 2007

Recently various low-noise-pavement methods have been developed. Since tire/pavement noise is the major source of traffic noise at high speed condition, the core-technology of low-noise pavement is to produce the road surface texture that can reduce tire/pavement noise. The difficulties in the development of the low-noise pavements are high costs and time to construct test roads, since vehicles have to travel on the test roads to evaluate the noise from a particular condition of pavement surface. Tire/Pavement Noise Simulator were developed to overcome those difficulties and the reliability of developed Tire/Pavement Noise Simulator are investigated based on the simulating and measuring the noise of tire-tined concrete pavement and tire-non tined concrete pavement.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.4
• /
• pp.1631-1638
• /
• 2013

Distress data, IRI, etc. are important factors in the evaluation of pavement condition. Recently, the need to consider tire-pavement noise in PMS (pavement management system) is raised. Generally, tire-pavement noise highly depends on the characteristics of pavement texture. Therefore, estimation of texture characteristics may give useful information to predict tire-pavement noise. Measurement of MPD (Mean Profile Depth) by using PLP (Portable Laser Profiler) provide very fast. The texture characteristics by means of MPD can be in a short time. hence, It can be a good alternative to give noise information, if MPD and tire-pavement noise have robust relationship. In this study, MPD and tire-pavement noise were simultaneously collected on the number of asphalt section to evaluate the tire-pavement noise due to the pavement texture characteristics. A set of statistical analysis was performed to propose relationship between tire-pavement noise and MPD for asphalt concrete pavement.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.5
• /
• pp.917-922
• /
• 2009

This paper presents a technique to generate road surface profiles in a spatial domain using a power spectral density function. A single track power spectral density function is proposed to describe a road surface profile, which is also applicable for multi-track vehicle response analysis. The roads in lateral direction makes the relation between the coherence of the lateral tracks. The derived road surfaces are compared to ISO(International Organization for Standardization) standards. Generated road profiles are in good agreements with the target road PSD shape and measured coherence relation.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2006.04a
• /
• pp.327-332
• /
• 2006

본 연구의 목적은 GIS 공간분석을 이용하여 음영에 따른 노면결빙예상구간을 정량적으로 평가하는데 있다 산악지역의 도로는 절토 및 터널구간이 많아서 겨울철에는 결빙구간이 발생될 우려가 있으며, 이는 교통 안전사고를 크게 야기시킬 수 있다. 따라서 도로의 기본설계에서부터 각 구간에서의 일조 환경 및 노면결빙예상구간을 정량적으로 정확하게 예측할 수 있는 분석이 필요하다. 본 연구에서는 동해고속도로 중 약 29km구간에 대하여 3차원 모델링, 일조 시뮬레이션, 지오데이터베이스 구축, GIS 중첩 기능에 의한 공간분석을 통해 노면결빙 예상구간을 추출할 수 있었다. 연구결과, GIS를 이용할 경우 기상조건 별로 도로의 일조영향에 따른 노면결빙 예상구간을 정량적으로 추출할 수 있었으며, 연구대상지역 중 상당한 구간이 결빙의 위험에 노출되어 있음을 알 수 있었다. 또한 GIS를 이용한 렌더링 기법이 기존의 음영기복 방법보다 정확하며, 3차원 상에서 그림자의 변화를 시각적으로 판단할 수 있음을 알 수 있었다. 향후 본 논문이 도로관련 법제도상의 노면결빙구간에 대한 규정을 제정하는데 크게 이바지할 수 있을 것으로 생각되며, 도로 설치 구조물의 배치 및 도로포장의 종류 등을 고려한 추가적인 음영구간추출 연구가 필요하다고 판단된다.

• Korean Journal of Construction Engineering and Management
• /
• v.7 no.6
• /
• pp.79-89
• /
• 2006

Current removing process is labor intensive and time consuming, employing a conventional grinding type manual machine. From a social and economic point of views, these kinds of manual tasks bring about social inconvenience and economic loss including traffic jam and high labor costs. The objective of the study was to develop and evaluate a road stripe removal equipment using water jet technology. The following shows the results. First, It was analyzed that the obtainable productivity from the equipment developed in the study is 280% compared to the current equipment. In this study, it was also calculated the Benefit/Cost Ratio and the result showed that the ratio is 3.28, so it is expected that the equipment can produce great benefits for the relevant companies. Second, an analysis was also conducted on the traffic congestion cost, and the equipment could save about \2,550 million per day compared to the conventional equipment. Therefore, it is analyzed that the economic viability of the equipment is sufficient.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.5D
• /
• pp.813-819
• /
• 2006

Skid Resistance is a index to represent the friction between tire and road surface, which influences driving safety. Skid resistance varies with the conditions of tire, abrasion of road surface, vehicle speed, drying, wet and freezing condition of road surfaces. Especially, freezing occurs when temperature drops below $0^{\circ}C$ followed by snow or rain causes decrease of skid resistance. To recover the decreased skid resistance deicing work is applied. As a results of deicing works, freezing condition is changed into wet condition. However the wet road surfaces containing the remaining deicings agents may not show the skid resistance of normal wet condition. In this study, skid resistances in the condition of freezing, deicing process and deicing agents remained after snow-removal are evaluated. The test results, skid resistance recover quickly when Pre-wetted salt spreading and NaCl was used as deicing method. Skid resistance of Deicing agents remained on the road surface showed that concrete is higher than asphalt. superior effect. Recovery rate of skid resistance by comparison wet condition is 54~80%.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2010.05a
• /
• pp.391-392
• /
• 2010

The frozen road is effected as major cause of car accident in winter. Especially, road surface freezing on the highway can lead to fatal accident. The accident by frozen road can effectively reduced by prevent road surface freezing before it frozen as evaluate road surface condition. Therefore, this study installed thermometer in each depth of concrete pavement for evaluate road surface conditions which freezing chronically. The result of this study will be used as preliminary data for predict before freezing.

• Journal of Korean Society for Geospatial Information Science
• /
• v.13 no.4 s.34
• /
• pp.19-25
• /
• 2005

This study suggests a method for securing road safety by extracting the expected surface freezing section in planning a route using GIS. When planning a road construction in a mountainous area it is possible to confront surface freezing especially in the wintertime. In addition, it is required assessment data of surface freezing rates in the case of turnkey inspections of newly constructed or expanded roads. Consequently, an analysis method that can quantitatively estimate the surface freezing section and sunshine influence on each section of a road is needed. We can extract the expected surface freezing section which amounted to around 29km of the Donghae highway, with such techniques as three-dimensional modeling, sunshine simulation geographical database construction and spatial analysis using the overlay function of the GIS spatial analysis. This study can be used as a method to assess advance safety which has a direct influence on planning the blueprint that should be approved by a policy maker after efficiently understanding the expected surface freezing section in accordance with hill shade.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.6
• /
• pp.101-107
• /
• 2020

Road surface measurement is an essential process for quantifying the degree and displacement of roughness in road surface management. For safer road surface management and quick maintenance, it is important to accurately measure the road surface while mounted on a vehicle. In this paper, we propose a sophisticated road surface measurement system that can be measured on a moving vehicle. The proposed road surface measurement system supports more accurate measurement of the road surface by using a high-performance line laser sensor. It is also possible to measure the transverse and longitudinal profile by matching the position information acquired from the RTK, and the velocity adaptive update algorithm allows a manager to monitor in a real-time manner. In order to evaluate the proposed system, the Gocator laser sensor, MRP module, and NVIDIA Xavier processor were mounted on a test mobile and tested on the road surface. Our evaluation results demonstrate that our system measures accurate profile base on the MSE. Our proposed system can be used not only for evaluating the condition of roads but also for evaluating the impact of adjacent excavation.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.1
• /
• pp.185-194
• /
• 2014

This study investigates the methodology to evaluate the quantified performance of pavement markings and traffic guide signs using digital images. This methodology is significant to attempt to quantify their performance without large brightness photometer at the nighttime and bad weather. The retroreflective performance of pavement markings are evaluated through the contrast of gray levels of pavements and markings in collected digital images under the case of rain, dampness, and dryness. In addition, the appraisal of retroreflective performance of traffic guide signs are implemented through the comparison between interior illuminated and the existing retroreflective traffic guide signs using the contrast of luminance extracted from the value of RGB of backgrounds and legends in collected digital images according to geometric design, driving lanes, and the distance between the car and the sign. As a result, the retroreflective performance of pavement markings deteriorates about 3.5 times and 2 times under the case of rain and dampness respectively than dryness. Also, the performance of the existing traffic guide signs is significantly influenced by geometric design, driving lanes, and the distance, otherwise interior illuminated traffic guide signs. This methodology can be utilized to construct objective information of performance of traffic safety facilities to select appropriate position of expensive high reflective pavement markings and interior illuminated traffic guide signs considering diverse weather and geometric design.