• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.6
• /
• pp.475-478
• /
• 2002

Post-harvest treatment for barley production requires many steps including drying, cleaning, and packing, and these steps be needed many labor input. Rice processing complex (RPC) is useful for post harvest management system in rice production. However, it is rare to be used for barley production. This study was conducted to explore the variations of quality and labor saving between conventional method and bulk-management system in post-harvest using RPC. The sorting rate was not different between manual method and bulk management. The hardness of non-polished grain was ranged 10,175-10,329 g/$3.14mm^2$, and that for non-polished grain was higher than that for polished grain, but there was not different between drying method. There was not be showed the hunter's value such as L, a and b according to drying method. Cooking characters such as water absorption ratio, swelling ratio, and water soluble extracts by circulated or continued dryer was higher than manual drying using solar heat. Labor input per ha for each cultivation process in bulk-management of barley using rice processing complex was 21 hours, compared to 46 hr/ha in the conventional method, labor input was greatly saved by up to 54.3% in the post-harvest bulk management system.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.290-293
• /
• 2003

The field organization management in construction industry is very important factor improvement and cost reduction. But, until now, evaluation methods on the existing field organization did not make ready and endeavor of organization betterment was insufficient in construction industry. The purpose of this study to provide basic data for reasonable selection and evaluation of the field manager through analyzing operation status of the existing field organization in apartment and office building project by interview and questionnaire on the 22 construction companies. This study presented optimal proposal on the selection and evalution of field manager for productivity improvement and cost reduction by means of efficient construction progress in apartment and dffice building project.

• The Journal of the Korea Contents Association
• /
• v.18 no.2
• /
• pp.188-199
• /
• 2018

The purpose of this study is to grasp the type of network activity and corporate competency based on network theory and to compare and analyze the relationship between these characteristics and business performance. The results showed that the frequency, importance, and reliability of CEO's had a positive (+) effect on business performance, and the mediating effect of corporate competency (industrial information competency, opportunity capture competency, strategic flexibility, and transaction cost reduction) appeared. This study tried to measure business performance by including corporate competency as a direct performance variable of CEO's network activity and found that it is desirable to focus on interacting with the most important network sources and to make efforts to strengthen the qualitative characteristics of network activities rather than expanding the scope of the network in order to improve the performance of CEO's Network Activity.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.40 no.2
• /
• pp.18-28
• /
• 1998

현재의 가축분뇨처리 형태와 축종별 적용대상은 표 3과 같이 분류되며, 축분 퇴비화 뇨오수 정화방식의 고액분리 형태에서 분뇨혼합물의 동시처리 즉, 깔감축사(소, 돼지), 슬러리 발효 퇴비화를 통한 무방류 시스템으로 변화되는 추세이다. 이러한 현상은 최근의 방류수질 규제강화에 따른 무방류화 저비용 단순화를 지향하고 있으며, 무방류화의 가장 큰 걸림돌은 톱밥과 같은 수분조절재 부족이라 할 수 있다. 현재 이용되고 있는 주요 시스템별 개선안은 다음과 같다. $\square$ 주요 처리 시스템 적용의 문제제기 $\circ$ 축분발효시설 - 톱밥 등 부자재 무이용을 위한 축분의 예비 건조시설 이용 - 교반식 발효기의 악취확산방지를 위하여 밀폐형 하우스 및 강제환기 장치 설치에 의한 악취 포집 및 탈취 - 중소규모 발효시설 개발 $\circ$ 화력건조 - 예비건조를 통한 톱밥, 연료비용 절감 - 악취방치 장치부착 의무화 $\circ$ 활성오니 정화시설 - 시설 운전관리 단순화 - 1차 고액분리를 통한 유입수 오염부하량 감소 및 균일화 $\circ$ 깔감축사 - 경제적으로 흡수를 극대화할 수 있는 수분조절재의 조합비 결정 및 혼합물을 깔감으로 재이용 기술개발 $\circ$ 슬러리 발효퇴비화 시설 - 톱밥 등 수분조절재 사용량 절감기술 - 증발량 극대화 기술개발 및 소요에너지 최소화기술개발 우리나라는 사계절이 뚜렷하여 외기상에 따라 편차가 심하며, 고밀도 사육 및 지역적 편중성, 경지면적 협소, 고비용 시장구조 등의 축산환경을 고려한다면 근원적으로 가축분뇨문제 해결한다는 것은 결코 쉬운 일이 아니다. 이는 저공해 사료개발에서부터 분뇨가 발생단계에서 분리, 수거할 수 있는 수거시설, 고효율 분뇨처리시스템의 정립, 액비 및 퇴비의 가공, 토양환원되었을 때 작물생장장애, 액비, 퇴비의 유통, 가축분뇨처리 정책 및 규제법 등의 각 분야에서 복합적 노력이 필요하다.

• Journal of the military operations research society of Korea
• /
• v.32 no.2
• /
• pp.1-20
• /
• 2006

In modern marketing environment, we are more interested in logistics as industrial structure is complicated and globalized. Most companies focus on reducing the cost price. So a lot of companies study on cost estimation logistics. However, it Is very difficult to estimate the cost of logistics. Thus they mainly use linear method such as the simple distance of transportation. This study defines the cost of logistics, structure & network of military logistics and proposes the costing estimation model in the logistics. We apply to battle shoes which are the main clothing in the military. In the result, we found some differences on the rate of cost structure between military and civil companies. This study can be used directly to the decision making for optimal military logistics alternatives and contribute to the efficient operation of military budget.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.5
• /
• pp.463-471
• /
• 2014

As building height and span is getting taller and longer, the researches to increase material's strength and serviceability are continuously performed. This study evaluated mechanical and chemical properties of newly developed high-strength steel (HSS) for building structures, namely HSA800 and verified cost-effectiveness and applicability of HSS for a tall building by comparing the analysis results of normal strength steel (SM490) model. HSA800 was manufactured by TMCP to have a good weldability in spite of HSS and satisfied Korean Industrial Standards (KS). The analysis results for evaluating cost-effectiveness show that total steel quantity could be saved approximately 30% when using HSS compared to SM490. It is expected that HSA800 will contribute to enhance constructability of building.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.43 no.4 s.310
• /
• pp.15-22
• /
• 2006

Nowadays, there is called energy saving, that it is accomplished with a lot study and application development as according to demand of all around world. It is using to network device of wire or wireless such as internet, lan, plc, and zigbee and that we should be accomplished to study about method that spending a little cost to fatal error in control system that be expected of frequent occurrence on network, and that have method to do construction a little bit tried out. Also, in that such a embedded system with network function case, there is important thing that it is remote management to network node and control methods to trust because firmware upgrade have the advantage of more than the other device. In this paper, we have verified through a result of experiment for efficient remote management and control method as previously stated in this paper, that it is area of the PLC for sensor node and doing management to relay, and implementation of the LACC which is core part of the ESS, and in order to get a result to trust from doing analysis of capacity and test.

• Journal of Convergence Society for SMB
• /
• v.2 no.2
• /
• pp.13-19
• /
• 2012

Various quality requirements have increased in developing embedded systems. One of those requirements in mobile embedded system is to reduce energy consumption because of limited power supply. Especially as the complexity of embedded software is increased, the interests of the software energy consumption analysis is also increased. In recent years, some studies has been carried out model-based analysis because it can be able to reflect energy consumption requirements in design phase. In this paper, we proposes a model-based energy analysis technique using SysML parametric diagram. The proposed technique designs software activity model using characteristics of parametric diagram, and then energy consumption value by the execution of the model is derived. Our technique has merit that can perform tradeoffs analysis for energy quality property between different implementations.

• Environmental and Resource Economics Review
• /
• v.15 no.1
• /
• pp.95-133
• /
• 2006

This research first reviewed and analysed the current domestic situation of the voluntary agreement implementation and then it developed the policy implementation scenarios which will be applied to the model, KORTEM_ V.2. The model, consisted with 83 industries and commodities, examined the economic and environmental impacts of this policy instrument. Depending on the efforts of participating sectors and agents for fuel substitution and energy efficiency improvement, it has been evaluated that the voluntary agreement could be the "no-regret" policy. In other words, if the participating sectors and agents can achieve the voluntary energy conservation and emission reduction target without the negative impact on output level, the reduction of national emission will be achieved by creating the economic benefit, simultaneously. Therefore, for the successful implementation of voluntary agreement, this study emphasized the importance of expansion and strengthening of the current financial and institutional support for participating sectors and agents.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.4
• /
• pp.47-53
• /
• 2013

Nowadays, Advanced country have devised a plan energy-saving through lighting effectiveness and increasing performance of lighting control system. If it uses the LED as a source of light then conserve electricity by 50%. This paper implement LEMS(Lighting Energy Management System) that applicate and Smart Dimmer and Smart Switch that control the digital LED light, support wired-wireless communication using USN(Ubiquitous Sensor Network). This system of validity and reliability control special purpose lamp including indoor and outdoor lighting and landscape lighting effectively. It minimize the use of indoor and outdoor lighting energy by USN remote integral control function of Digital System Lighting of LED and increase effectiveness of energy and is a collaborative system that can feedback the use of electricity by measurement itself through Web and Switch.