• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.265-266
• /
• 2012

의료용 X-ray의 발전에 따라, 영상의 Digital화가 필요하게 되었다. Digital 영상 구현을 위해 다양한 형태의 영상 검출기가 개발되었다. 진단 영상의 조건으로는 구현 시간이 빠르고 해상도가 높아야 한다. 조건에 부합하는 Flat panel 형태의 직접방식과 간접방식 검출기의 개발이 주로 이루어졌으며, X-ray 검출 효율이 높고 공간 분해능이 높은 직접 방식의 검출기에 대한 연구가 활발히 진행되고 있다. 기존 직접방식의 X-ray 검출물질로는 A-Se이 이용되었다. 하지만 A-Se의 경우 낮은 원자번호로 인해 X-ray에 대한효율이 낮으며, 제조 공정과 수율의 문제로 인해 대체 물질의 개발과 공정의 개선이 필요하다. 선행 연구를 통해 X-ray 검출물질의 전기적 특성을 파악을 통해 대체 물질로서 가능성을 알아보았다. 본 연구에서는 기존에 제작된 X-ray 검출물질의 상부전극 증착 물질과 증착법 선정에 대한 연구이다. 선행 연구를 통해 선정된 X-ray 검출물질은 HgI2이다. 상, 하부 전극 선택에 있어 HgI2의 일함수 값(4.15eV)을 고려하여 그와 비슷한 일함수 값을 가진 물질로 전기적 장벽을 제거하여야 한다. 따라서, ITO (일함수 4.45eV)와 Au (일함수 5.1eV)을 선택하였다. ITO의 증착으로 이용된 방법으로는 on-axis 형태의 magnetron plasma sputtering을 이용하였으며, Au의 증착으로 이용된 방법은 Thermal evaporation deposition을 이용하였다. plasma sputtering에 이용된 타겟은 In2O3;SnO2 (조성비:90:10wt%)를 사용하였으며, Chamber의 크기는 넓이 456 ${\phi}cm^2$ 높이 25 cm이며, 로 target과 기판과의 거리는 15cm이다. plasma발생에 필요한 가스로는 Ar과 O2를 이용하였다. 고 진공 환경 조성에 이용된 장비로는 Rotary pump와 Turbo molecular pump이다. plasma 발생 전 진공도는 $3.2{\times}10^{-5}$ Torr, 발생 후 진공도는 $5.1{\times}10^{-5}$ Torr이다. plasma 환경이 조성된 후 증착 시간은 1분 30초이다. Au는 순도 99.999%를 이용하였으며, 이용된 금은 1회 증착에 0.3 g을 이용하였다. Chamber의 넓이 1,444 ${\phi}cm^2$이며, 높이 40 cm, boat와 기판과의 거리는 25 cm이다. 고 진공 환경 조성에 이용된 장비로는 Rotary pump와 diffusion pump를 이용하였다. Au의 승화 전 진공도는 $2.4{\times}10^{-5}$ Torr 증착 시 진공도는 $4.2{\times}10^{-5}$ Torr이며, Boat에 가해준 전압, 전류는 0.97 V, 47 A이며, 증착 시간은 1분 30초이다. 광도전체 층에 각각 증착된 전극의 저항을 통해 증착상태를 판단하였다. DMM (Digital Multimeter)로 1 cm 간격으로 측정된 표면의 저항은 ITO 약 $8{\Omega}$, Au 약 $3{\Omega}$으로 전극으로서 이용이 가능한 상태이다. Au와 ITO가 증착된 HgI2 시편의 전기적 특성은 기존에 이용된 X-ray 변환물질의 성능보다 우수하였다. 하지만 Au와 ITO가 각각 증착된 시편의 전기적 특성은 큰 차이를 보이지 않았다. ITO의 경우 진공 상태에서 이용되는 Gas가 이용되며, Plasma 환경 조성 유지가 어려운 점이 있다. Au전극은 증착 환경 조성이 쉽지만, 전극 물질 이용효율이 떨어지는 단점이 있다. 본 연구를 통해 X-ray 변환물질인 HgI2의 전극물질로 Au와 ITO의 이용가능성을 알아보았다. 두 전극으로 제작된 검출기의 성능은 큰 차이 없이 우수하였고, 전기적 장벽 상태가 낮아 높은 검출 효율을 보였다. 상대적으로 Au 전극의 공정이 간단하고 수율이 높다. 하지만 Au Source의 이용 효율이 떨어지는 단점이 있다. 본 연구의 결과를 통해 공정상의 유리함과 Source의 이용효율을 고려한 분석에 대한 연구가 필요할 것으로 사료된다.

• Korean Journal of Materials Research
• /
• v.4 no.6
• /
• pp.687-694
• /
• 1994

Heteroepitaxial InP/GaAs layers were grown using the selective liquid phase epitaxy (SLPE) technique. It was observed that the optimum LPE conditions were $660^{\circ}C$ growth temperature, $5^{\circ}C$ supercooling, and $0.4^{\circ}C$/min cooling rate. Maximum expitaxial layer overgrowth (ELO) of 110-160$\mu \textrm{m}$ was obtained when the seed was aligned along (112) orientation. Initial melt-back of the substrate was observed but limited to the seed region so that flat In-Ga-As-P layers were grpwn throughout the GaAs substrates. The InP/GaAs heteroepitaxial structure could be obtained by growing an additional InP layer on top of the In-Ga-As-P layer.

• Geophysics and Geophysical Exploration
• /
• v.14 no.1
• /
• pp.18-24
• /
• 2011

A multi-channel seismic reflection (MCS) survey was conducted in 2009 to explore the deep crustal structure of the Pacific Plate south of Hokkaido. The survey line happened to traverse a 250-km-wide Warm Core Ring (WCR), a current eddy that had been generated by the Kuroshio Extension. We attempted to use these MCS data to delineate the WCR fine structure. The survey line consists of two profiles: one with a shot interval of 200m and the other with a shot interval of 50 m. Records from the denser shot point line show much higher background noise than the records from the sparser shot point line. We identified the origin of this noise as acoustic reverberations between the sea surface, seafloor and subsurface discontinuities, from previous shots. Results showed that a prestack migration technique could enhance the signal buried in this background noise efficiently, if the sound speed information acquired from concurrent temperature measurements is available. The WCR is acoustically an assemblage of concave reflectors dipping inward, with steeper slopes (${\sim}2^{\circ}$) on th ocean side and gentler slopes (${\sim}1^{\circ}$) on the coastal side. Within the WCR, we recognised a 30-km-wide lens-shaped structure with reflectors on the perimeter.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.471-479
• /
• 2015

This study examined the effects of smart phone use while young adults negotiated an obstacle (2 cm high). Seventy-four young adults (mean age: $23.76{\pm}3.17years$, age range: 20-27 years) participated in the study. They were allocated randomly into two groups; smart phone group and no smart phone group. The smart phone group negotiated an obstacle while simultaneously using a smart phone at a self-paced speed whereas the no smart phone group negotiated an obstacle with no special option. A motion analysis system were used to measure the gait parameters, such as toe clearance, cadence, step length, step width, stride length, and walking velocity in two groups. The toe clearance, and step-width, cadence, and step-length were significantly greater for the smart phone group than the no smart phone group (p<.05) and the walking velocity was significantly lower in the smart phone group (p<.05). On the other hand, there was no significant difference in the stride length between the two groups. This study suggests that smart phone use degrades the obstacle avoidance abilities of healthy young adults, which may increase risk of falls.

• The Journal of the Korea Contents Association
• /
• v.13 no.10
• /
• pp.256-265
• /
• 2013

With economic development and ever-changing technology, human has entered the era of "Product-as-a-Service". At the same time, the update of the product gradually accelerated. The demand of consumers for products are slowly changed, they pay more attention to convenience, comfort and reliable quality and safety of the product. That is the humanized design problem that often mentioned in the product design. This also put forward new requirements for the design and development of product modeling. So how to reflect the humanized ideas in the product design has also become common focus of attention of product designers, users and producers of a new era. The paper is based on the principles of ergonomics to investigate and improve the daily life utensil - flashlight. Firstly, make a sample survey of the flashlight in Beijing market and analyze the characteristics and problems of flashlight products. Secondly, explore the use of the flashlight and proposed Flashlight curved grip design to reduce the occurrence of wrist discomfort and damage to the body caused by poor posture of the operation of users. Finally, determine the range of the length and width of the body of the flashlight according to the length and width measurement data of the Chinese palm. Wishing that the improvements of flashlight products in ergonomics can improve use of feelings of these products and give a theoretical guidance for solving similar problems.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.8
• /
• pp.611-620
• /
• 2018

For the past decades, the analytic model for distributed surface roughness has been developed to improve the accuracy of the icing simulation code. However, it remains limitations to validate the developed model and determine the empirical parameters due to the absence of the quantitative experimental data which were focused on the surface state. To this end, the experimental study conducted to analyze the ice covered surface state from a micro-perspective. Above all, the tendency of the smooth zone width which occurs near the stagnation point has been quantitatively analyzed. It is observed that the smooth zone width is increased as growing the ambient temperature and freestream velocity. Next, the characteristics of the ice covered surface under rime and glaze ice have been analyzed. For rime ice conditions, ice elements are developed as the opaque circular corn in the opposite direction of freestream. The height and interval of each circular corn are increased as rising the ambient temperature. For glaze ice conditions, numerous lumps of translucent ice can be observed. This is because the beads formed by gravity concentrate and froze on the lower surface.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.431-440
• /
• 2017

The purpose of this study was to investigate the effects of Iyengar yoga practice on the lower body imbalance in middle-aged women. The subjects (n=24), who had not performed yoga training prior to this study (and) were not attending any other training programs, participated after undergoing an X-RAY examination with the Gonstead Technique and then their lower body imbalance (was reevaluated). The subjects completed the yoga program for 12 weeks (3 times per week, 90 minutes per session). The data were analyzed with the paired t-test and alpha was set at 0.05. It was found that 1) the height differences between the right and left iliac crests (p < 0.001), width (p < 0.001) and length (p < 0.001) differences between the right and left iliac fossa, and width differences between the right and left sacrum (p < 0.001) were significantly reduced after the training program. In addition, 2) the lower limb length discrepancy was significantly reduced (p < 0.001). Our data suggest that Iyengar yoga training for 12 weeks reduces the pelvic imbalance and length differences between the right and left lower limbs in middle-aged females.

• Journal of Wetlands Research
• /
• v.19 no.4
• /
• pp.409-422
• /
• 2017

In order to understand the environmental factors affecting the waterbird community in winter, we divided the watershed into 6 sections and investigated the size of the stream, the water quality, benthic invertebrates, and fish including birds. The influences on the community of water birds in Wonju stream were river structure, temperature and water quality. Among the structure of the river, the factors affecting the waterbird community in winter were the width of the stream and the width of the flowing water. The wider the width, the more species and the number of the winter waterbirds were. As the width of river water was wide, the smaller the width and width of the waterway, the fewer the population. The temperature changes of the wintering season affected the community of water birds because it led to freezing of rivers. The sections that were not frozen showed a significant increase and decrease in the temperature drop and rise. The values of pH, water temperature, COD, BOD, TN, TP and total E. coli increased with the increase of the downstream waterbirds population in the water quality survey. The water quality of S6 was affected by the downstream sewage treatment plant The number of wintering waterbirds was also highest. The effluent from the sewage treatment plant seems to have a considerable influence on the water quality. The increase of several items such as TN promotes the nutrition of the river, which leads to the accumulation of organic matter and the proliferation of aquatic organisms. This may be the cause of the increase in winter waterbirds as a food source. The benthic macroinvertebrate communities and fish communities did not show any correlation with the wintering water-birds communities.

• Journal of Digital Convergence
• /
• v.15 no.8
• /
• pp.465-476
• /
• 2017

This study attempted to investigate the effects of gold therapy on myofascial pain syndrome(MPS) in the neck, back and shoulder in comparison to stone therapy and verify its availability as an efficient nursing mediator in clinical trials. For this, therapy was given to a total of 20 women in two groups (gold therapy group, stone therapy group: 10 persons each) living in the capital region three times a week (40 min. at a time) for two weeks. In both groups, a statistically significant decrease was found in the following after the treatment: neck circumference, shoulder width, width of the inferior angle of scapula, shoulder thickness and waist circumference (p<0.001). In terms of differences, the gold therapy group was greater than the stone therapy group. In both groups, a statistically significant increase was observed after treatment in the following: cervical lateral bending (right), cervical lateral bending (left), cervical flexion and cervical extension angle (p<0.001). In terms of differences, the gold therapy group was greater than the stone therapy group. In conclusion, this study seems to show that gold therapy is a nursing intervention option having effective fascial relaxation and pain relief for the neck, back and shoulder. Therefore, it would be valuable as safe, non-invasive therapy.

• Korean Journal of Remote Sensing
• /
• v.35 no.6_1
• /
• pp.973-985
• /
• 2019

In this paper, we propose a method to separate the ground and building areas and generate building models automatically through planarity analysis using UAV (Unmanned Aerial Vehicle) based point cloud. In this study, proposed method includes five steps. In the first step, the planes of the point cloud were extracted by analyzing the planarity of the input point cloud. In the second step, the extracted planes were analyzed to find a plane corresponding to the ground surface. Then, the points corresponding to the plane were removed from the point cloud. In the third step, we generate ortho-projected image from the point cloud ground surface removed. In the fourth step, the outline of each object was extracted from the ortho-projected image. Then, the non-building area was removed using the area, area / length ratio. Finally, the building's outer points were constructed using the building's ground height and the building's height. Then, 3D building models were created. In order to verify the proposed method, we used point clouds made using the UAV images. Through experiments, we confirmed that the 3D models of the building were generated automatically.