• Title/Summary/Keyword: 넓은 속도 범위

Search Result 276, Processing Time 0.036 seconds

Analysis of Key Parameters for the Printing Process Optimization of a Fluid Dispensing Systems (유체 디스펜싱 시스템의 프린팅 프로세스 최적화를 위한 주요 파라미터 분석)

  • Hoseung Kang;Haechang Jeong;Soonho Hong;Nam Kyung Yoon;Sunyoung Sohn
    • Journal of the Korean Institute of Electrical and Electronic Material Engineers
    • /
    • v.37 no.4
    • /
    • pp.382-393
    • /
    • 2024
  • The Microplotter system with a fluid dispensing method, sprays fluid based on ultrasonic pumping through piezoelectric devices. This technique can possible for various materials with a wide range of viscosities to be printed in microscale. In this paper, we introduces dispenser printing technology as well as aim to understand and apply various processes using the equipment. In addition, we will explain how to optimize the equipment by adjusting parameters such as spray intensity, tip height during printing, and patterning speed. By utilizing Microplotter's advantage of being compatible with a wide range of fluids, including metal nanoparticles, carbon nanotubes, DNA, and proteins, it is expected to be used in various fields such as printed electronics, biotechnology, and chemical engineering.

A 10b 50MS/s Low-Power Skinny-Type 0.13um CMOS ADC for CIS Applications (CIS 응용을 위해 제한된 폭을 가지는 10비트 50MS/s 저 전력 0.13um CMOS ADC)

  • Song, Jung-Eun;Hwang, Dong-Hyun;Hwang, Won-Seok;Kim, Kwang-Soo;Lee, Seung-Hoon
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.48 no.5
    • /
    • pp.25-33
    • /
    • 2011
  • This work proposes a skinny-type 10b 50MS/s 0.13um CMOS three-step pipeline ADC for CIS applications. Analog circuits for CIS applications commonly employ a high supply voltage to acquire a sufficiently acceptable dynamic range, while digital circuits use a low supply voltage to minimize power consumption. The proposed ADC converts analog signals in a wide-swing range to low voltage-based digital data using both of the two supply voltages. An op-amp sharing technique employed in residue amplifiers properly controls currents depending on the amplification mode of each pipeline stage, optimizes the performance of op-amps, and improves the power efficiency. In three FLASH ADCs, the number of input stages are reduced in half by the interpolation technique while each comparator consists of only a latch with low kick-back noise based on pull-down switches to separate the input nodes and output nodes. Reference circuits achieve a required settling time only with on-chip low-power drivers and digital correction logic has two kinds of level shifter depending on signal-voltage levels to be processed. The prototype ADC in a 0.13um CMOS to support 0.35um thick-gate-oxide transistors demonstrates the measured DNL and INL within 0.42LSB and 1.19LSB, respectively. The ADC shows a maximum SNDR of 55.4dB and a maximum SFDR of 68.7dB at 50MS/s, respectively. The ADC with an active die area of 0.53$mm^2$ consumes 15.6mW at 50MS/s with an analog voltage of 2.0V and two digital voltages of 2.8V ($=D_H$) and 1.2V ($=D_L$).

A Study on Ensuring Biosafety of Biotechnology Product under Debate about Trade and the Environment (DDA 무역-환경 논의와 생명공학제품의 안전성 확보)

  • Sung, Bong-Suk;Yoon, Ki-Kwan
    • Environmental and Resource Economics Review
    • /
    • v.13 no.3
    • /
    • pp.519-547
    • /
    • 2004
  • This paper analyze problems about scope of specific trade obligations(STOs), principle of dispute settlement procedure, and non-parties in context of the Cartagena Protocol on Biosafety(POB), which based on sub-paragraph 31(i) of DDA WTO Ministrial Declaration. The implications based on result of this study are as follows. First, to accept the wider scope of STOs under POB in Korea, importing country, won't be harmful to LMOs and Bioindustry. Instead, it will ensure a high level of biosafety concerning the import of LMOs. Exporters can take different kinds of trade measures to countervail adverse effect on the export of LMOs in this case. Therefore importer will endure the aftereffect. However, if korea were in exporter's place, to accept the wider scope STOs under POB will not have a good influence on the export of LMOs. Korea, therefore, should devise scheme for responding to debate about the STOs in MEAs, which have to be based on cost-benefit analysis and scenarios taking into account of speed and level in biotechology progress, status and trend of LMOs R&D and production, and condition of other industries. Second, it is not easy to agree with applying to what's rule between the POB and WTO for settlement dispute. Because there is the incompatibility between the POB characterized according to social rationality and WTO's rules for safety and environmental protection characterized according to scientific rationality. This issue have to be discussed for long period due to gap like that. Accordingly Korea, one of major LMOs importing countries, should suggest continuously that the effort is needed to ensure an adequate level of protection in transboundary movements of LMOs and scientific, environmental and socio-economic study. Third, in case of dispute between party and non-party of the POB, the duties under the WTO of non-party of the POB(if WTO member country) is valid. The country, therefore, will try to settle dispute based on WTO's rules. However, international society have to ensure for sound and safe use of LMOs in the field of transboundary movements. Accordingly Korea should devise scheme for preventing the possibility of dispute between party and non-party of the POB(if WTO member country), which is supported by policy options under the POB.

  • PDF

Evolution of Hydrothermal Fluids at Daehwa Mo-W Deposit (대화 Mo-W 열수 맥상 광상의 유체 진화 특성)

  • Jo, Jin Hee;Choi, Sang Hoon
    • Economic and Environmental Geology
    • /
    • v.46 no.1
    • /
    • pp.11-19
    • /
    • 2013
  • The Daehwa Mo-W deposit is located within the Gyeonggi massif. Quartz and calcite vein mineralization occurred in the Precambrian gneiss and Jurassic granites. Three main types (Type I: liquid-rich $H_2O$ type, Type II: vapor-rich $H_2O$ type, Type III: $CO_2-H_2O$ type) of fluid inclusions were observed and are classified herein based on their phase relations at room temperature. Within ore shoots, type III fluid inclusions have been classified into four subtypes (type IIIa, IIIb, IIIc and IIId) based on their volume percent of aqueous and carbonaceous ($CO_2$) phase at room temperatures combined with their total homogenization behavior and homogenization behavior of $CO_2$ phase. Homogenization temperatures of primary type I fluid inclusions in the quartz range from $374^{\circ}C$ to $161^{\circ}C$ with salinities between 13.6 and 0.5 equiv. wt.% NaCl. Homogenization temperatures of primary type III fluid inclusions in quartz of main generation, are in the range of $303^{\circ}C$ to $251^{\circ}C$. Clathrate melting temperatures of the type III fluid inclusions were 7.3 to $9.5^{\circ}C$, corresponding to salinities of 5.2 to 1.0 equiv. wt. % NaCl. Melting and homogenization temperatures of $CO_2$ phase of type III fluid inclusions were -57.4 to $-56.6^{\circ}C$ and 29.0 to $30.8^{\circ}C$, respectively. Fluid inclusion data indicate a complex geochemical evolution of hydrothermal fluids. The Daehwa early hydrothermal system is characterized by $H_2O-CO_2$-NaCl fluid at about $400^{\circ}C$. The main mineralization occurred by $CO_2$ immiscibility at temperatures of about 300 to $250^{\circ}C$. At the late base-metal mineralization aqueous fluid formed by mixing with cooler and less saline meteoric groundwater.

Experimental and Comparative Analysis about Discharge Coefficient of Sharp-crested Side Weir (횡월류예연위어 유량계수에 관한 실험 비교 연구)

  • Rhee, Dong-Sop;Kim, Chang-Wan;Lee, Dong-Kee
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2006.05a
    • /
    • pp.1295-1299
    • /
    • 2006
  • 횡월류위어는 홍수 피해 경감을 위해 계획되는 방수로나 저류지의 유입부에 주로 사용된다. 따라서 이러한 횡월류위어를 통해 방수로나 저류지로 월류되는 월류량을 정확히 예측하는 것은 이러한 시설의 홍수 피해 경감 능력을 예측하는데 있어 매우 중요하다. 횡월류위어를 통해 흐르는 흐름은 매우 복잡하기 때문에 일반적으로 이러한 흐름을 분석하는 것은 매우 어렵다. 따라서 대부분의 횡월류위어 유량계수 공식은 De Marchi의 해석해와 다양한 실험 자료에 근거하여 제시되고 있다. 따라서 지금까지 횡월류위어 유량계수에 대하여 많은 공식이 제안되어 왔지만, 대부분의 공식이 유사한 형태를 가지고 있으며, 횡월류위어의 상류에서의 프루드수$(Fr_1)$를 제일 중요한 설계 인자로 고려하고 있다. 그러나 최근 횡월류위어에 대한 연구가 점차 발전됨에 따라 횡월류위어 상류에서의 프루드수 외에도 위어높이와 횡월류위어 상류 수심의 비(h/y), 그리고 횡월류위어의 길이와 본류 폭의 비(L/B) 등이 고려되고 있다. 그 중에서 L/B 의 효과는 점차 중요하게 고려되고 있다. 그러나 대부분의 연구자들이 사용한 실험 장비들은 상 대적으로 높은 L/B 조건을 가지는데 반하여, 현재 국내에서 계획되고 있는 천변저류지 등에 설계된 횡월류위어의 설계 범위는 대체로 $1/10{\sim}1/200$이므로 기존 연구자들의 실험 범위와 매우 다르다고 할 수 있다. 따라서 본 연구에서는 상대적으로 폭이 넓은 실험 수로를 이용하여 횡월류예연위어의 유량 계수에 대한 실험을 수행하였다. 지금까지의 실험 결과에 의하면 동일한 실험 조건에 대해서 기존 연구자들에 의해서 제안된 공식으로 계산한 유량계수 보다 측정된 자료를 이용하여 계산한 유량계수의 값이 상대적으로 더 큰 것 으로 나타났다. 통해 배수될 때 암석이 머금고 있는 물로 인해 추가적으로 발생하는 중력은 다른 재료가 가지지 못한 화산석의 또 다른 장점이라 할 수 있다.서는 자료변환 및 가공이 필요하다. 즉, 각 상습침수지구에 필요한 지형도는 국립지리원에서 제작된 1:5,000 수치지형도가 있으나 이는 자료가 방대하고 상습침수지구에 필요하지 않은 자료들을 많이 포함하고 있으므로 상습침수지구의 데이터를 인터넷을 통해 서비스하기 위해서는 많은 불필요한 레이어의 삭제, 서비스 속도를 고려한 데이터의 일반화작업, 지도의 축소.확대 등 자료제공 방식에 따른 작업 그리고 가시성을 고려한 심볼 및 색채 디자인 등의 작업이 수반되어야 하며, 이들을 고려한 인터넷용 GIS기본도를 신규 제작한다. 상습침수지구와 관련된 각종 GIS데이타와 각 기관이 보유하고 있는 공공정보 가운데 공간정보와 연계되어야 하는 자료를 인터넷 GIS를 이용하여 효율적으로 관리하기 위해서는 단계별 구축전략이 필요하다. 따라서 본 논문에서는 인터넷 GIS를 이용하여 상습침수구역관련 정보를 검색, 처리 및 분석할 수 있는 상습침수 구역 종합정보화 시스템을 구축토록 하였다.N, 항목에서 보 상류가 높게 나타났으나, 철거되지 않은 검전보나 안양대교보에 비해 그 차이가 크지 않은 것으로 나타났다.의 기상변화가 자발성 기흉 발생에 영향을 미친다고 추론할 수 있었다. 향후 본 연구에서 추론된 기상변화와 기흉 발생과의 인과관계를 확인하고 좀 더 구체화하기 위한 연구가 필요할 것이다.게 이루어질 수 있을 것으로 기대된다.는 초과수익률이 상승하지만, 이후로는 감소하므로, 반전거래전략을 활용하는 경우 주식투자기간은 24개월이하의 중단기가 적합함을 발견하였다. 이상의 행태적 측면과 투자성과측면의 실증결과를 통하여 한국주식시장에 있어서 시장수익률을 평균적으로 초과할 수 있는

  • PDF

Major, Rare-Earth and Trace Geochemistry of Ulleungdo Volcanic Rocks (울릉도 화산암의 주원소, 휘토류 및 미량원소 지구화학)

  • 송용선;박계헌;박맹언
    • The Journal of the Petrological Society of Korea
    • /
    • v.8 no.2
    • /
    • pp.57-70
    • /
    • 1999
  • The volcanic rocks of Ulleungdo reveal very high alkali element abundances and most of them have high K20/Na20 ratios and belong to potassium-series. Ulleungdo volcanics show very wide range of variation in their composition from basalts to trachytic basalt, basaltic trachyandesite, trachyandesite, and finally to trachyte on total alkali-silica diagram. Such a general trend of compositional variation can be explained well by differentiation due to fractional crystallization of various minerals. Olivine, clinopyroxene, plagioclase, ilmenite, and apatite are suggested as the major fractionated minerals. Ulleungdo volcanics show Nb/U and PbICe ratios similar to oceanic volcanics such as MORB and OIB, but significantly different .from volcanic rocks of island arc environments, which suggest that they are not directly related with subduction along the Japanese arc. LREE abundances of Ulleungdo volcanics are highly enriched compared with HREE abundances ((La)N=193-420, (L~)~=7.5-19.5).O nly trachyte-1 show appreciable negative Eu anomalies among various rock types, which suggests significant amount of plagioclase were fractionated. However, trachyte-2, trachyte-3, phonolite, and pumice reveal quite different variation trend of trace and rare earth element abundances from trachyte-1, which suggest that they have originated from different magma batches and have experienced different differentiation processes. A prominent bimodal distribution, thus lacking of intermediate composition, is observed from the Ulleundo volcanics.

  • PDF

Characterization of Single Stranded DNA-Dependent ATPase Activities of Deinococcus radiodurans RecA Protein (Deinococcus radiodurans RecA 단백질의 외가닥 DNA-의존성 ATPase 활성 분석)

  • Kim, Jong-Il
    • Korean Journal of Microbiology
    • /
    • v.43 no.4
    • /
    • pp.250-255
    • /
    • 2007
  • The RecA protein of Deinococcus radiodurans is essential for the extreme radiation resistance of this organism. The central steps involved in recombinational DNA repair require DNA-dependent ATP hydrolysis by recA protein. Key feature of RecA protein-mediated activities is the interactions with ssDNA and dsDNA. The ssDNA is the site where RecA protein filament formation nucleates and where initiation of DNA strand exchange takes place. The effect of sequence heterogeneity of ssDNA was examined in this experiment. The rate of homopolymeric synthetic ssDNA-dependent ATP hydrolysis was constant or nearly so over a broader range of pHs. For poly(dT)-dependent ATP or dATP hydrolysis, rates were generally faster, with a broader optimum between pH 7.0 and 8.0. Activities of RecA protein were affected by the ionic environment. The ATPase activity was shown to have different sensitivity to anionic species. The presence of glutamate seemed to slimulate the hydrolytic activity. Dr RecA protein was shown to require $Mg^{2+}$ ion greater than 2 mM for binding to etheno ssDNA and the binding stoichiometry of 3 nucleotide for RecA protein monomer.

Forest Vegetation types and Its Life-form Composition in Ulleung Island, Korea (울릉도 산림식생유형과 생활형조성)

  • Lee, Jung-Hyo;Hong, Sung-Cheon
    • Journal of Korean Society of Forest Science
    • /
    • v.95 no.3
    • /
    • pp.282-290
    • /
    • 2006
  • Forest vegetation types were studied by the phytosociological investigation and the TWINSPAN method in Ulleung Island, Korea. Two hundred thirty-two releves were sampled with $100m^2$ plots. Two main vegetation types, the mountain forest(Acer okamotoanum community group) and maritime forest(Artemisia scoparia community group), have been distinguished and typified twenty-two vegetation units. The former was divided in 4 communities, 11 groups and 7 subgroups. The latter was 2 communities and 5 groups. In a case of life-forms of mountain and maritime vegetation type, the composition ratio of species that had featured trees and herbs, hemicrypthophyte, a seed dispersion-type by wind or nature falling and erection form was high in the mountain vegetation type. Species that had featured shrubs, chamaephyte, disseminated mainly by a wind in the herbs, and animals and man or no special modification in the woody, narrowest extent of rhizomatous growth and the clonal growth by stolons and struck roots and procumbent form were abundantly distributed in the maritime bluff vegetation type. Particularly, the composition ratio of Sambucus sieboldiana var. pendula community(A6), disturbed vegetation type of middle-lower slope of mountain, that had featured a seed dispersion-type by wind, moderate and narrowest extent of rhizomatous growth and Tussock form was high.

A Seamline Extraction Technique Considering the Characteristic of NDVI for High Resolution Satellite Image Mosaics (고해상도 위성영상 모자이크를 위한 NDVI 특성을 이용한 접합선 추출 기법)

  • Kim, Jiyoung;Chae, Taebyeong;Byun, Younggi
    • Korean Journal of Remote Sensing
    • /
    • v.31 no.5
    • /
    • pp.395-408
    • /
    • 2015
  • High-resolution satellite image mosaics are becoming increasingly important in the field of remote sensing image analysis as an essential image processing to create a large image constructed from several smaller images. In this paper, we present an automatic seamline extraction technique and the procedure to generate a mosaic image by this technique. For more effective seamline extraction in the overlap region of adjacent images, an NDVI-based seamline extraction technique is developed, which takes advantage of the computational time and memory. The Normalized Difference Vegetation Index(NDVI) is an index of plant "greeness" or photosynthetic activity that is employed to extract the initial seamline. The NDVI can divide into manmade region and natural region. The cost image is obtained by the canny edge detector and the buffering technique is used to extract the ranging cost image. The seamline is extracted by applying the Dijkstra algorithm to a cost image generated through the labeling process of the extracted edge information. Histogram matching is also conducted to alleviate radiometric distortion between adjacent images acquired at different time. In the experimental results using the KOMPSAT-2/3 satellite imagery, it is confirmed that the proposed method greatly reduces the visual discontinuity caused by geometric difference of adjacent images and the computation time.

Physiology and Growth Properties of Halophilic Bacteria Isolated from Jeotgal (Salted Seafood) (젓갈(염장발효식품)에서 분리한 호염세균의 생리 및 성장특성)

  • Jung Yoo Jeong;Park Doo Hyun
    • Korean Journal of Microbiology
    • /
    • v.40 no.4
    • /
    • pp.263-268
    • /
    • 2004
  • Two species of halophilic bacteria were isolated from five salted seafoods and identified by 16S rDNA sequenc­ing homology. One was identified as Halomonas subglaciescola and other four strains were belong to Halomo­nas marina. The identity of all isolates with standard organisms was above $95\%.$ H. subglaciescola, H. marina IN, and H. marina SH-2 grew in salinity condition from $3%\;to\;18\%$ NaCl but growth of H. marina SQ and H. marina SH-l grew in salinity environment from $8\%\;to\;17\%.$ Maximum biomass of H. subglaciescola, H. marina IN, H. marina SQ, H. marina SH-1, and H. marina SH-2 growing in LB medium containing $15\%$ NaCl were about 3.2, 4.5, 4.5, 5.7, and 4.2, however the maximum biomass in LB medium containing $5\%$ NaCl were about 2.2, 1.1, 0.7, 0.2, and 2.4 as optical density at 660 nm, respectively. In scanning electron micrograph, unknown material (mucus) attached to outer membrane of all isolates was observed. When mucus isolated from halophilic bacterial cell was added to culture of E. coli, E. coli grew in medium containing $15\%$ NaCl.