• Journal of the Korean Society for Railway
• /
• v.12 no.5
• /
• pp.678-686
• /
• 2009

A trial run of locally-developed tilting train has been in process on Chungbuk line since the test vehicle was first produced. For the system stabilization, interface verification among the systems including track, structure, catenary and signaling system, not to mention the rolling stock, is very crucial. Therefore, in this study, the dynamic rail force of the tilting (Hanvit 200), high-speed (KTX) and general (Mugunghwa) vehicle caused by driving in transition curve track was measured. And, it compared the tilting response with the other by using the measured rail force data in transition curve track, and then evaluated probability the range of load fluctuation for the variable dynamic vertical and lateral wheel load. As a result, a range of rail force by occurred a change of cant from the high-speed and general vehicle which had fixed bogie structure was distributed throughout small deviation. Otherwise, in case of the tilting train which was consisted of the pendulum bogie structure was distributed wide range about large deviation by changed of cant.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• v.y2005m4
• /
• pp.47-52
• /
• 2005

We present a simple idea to simulate dynamic fracture and fragmentation of a propulsion system exposed to an extreme condition, such as a fire. The system consists of energetic materials confined in a steel cylinder. The strain failure model of the confinement is a modified Johnson-Cook model with a statistical failure distribution. By using the size distribution data of the fragments from the thermal explosion tests, the failure strain distribution can be empirically obtained and then entered into the model. The simulated fracture and fragment sizes are compared with the experimental records.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.13-21
• /
• 2005

I consider the structure of steady wave system which is admitted by the continuum equations for materials that undergo phase transformations with exothermic chemical reaction. In particular, the dynamic phase front structures between liquid and gas phases, and solid and liquid phases are computationally investigated. Based on the one-dimensional continuum shock structure analysis, the present approach can estimate the nano-width of waves that are present in combustion. For illustration purpose, n-heptane is used in the evaporation and condensation analysis and HMX is used in the melting and freezing analysis of energetic materials of interest. On-going effort includes extension of this idea to include broad range of liquid and solid fuels, such as rocket propellants.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.11
• /
• pp.2033-2048
• /
• 1992

This paper presents the theoretical development and qualitative evaluation of a new concept in the mathematical modeling of dynamic structures. We use both test data and analytical approximations to identify the parameters of an incomplete model. The model has the capability of predicting the response of the points of interest on the structure over the frequency range of interest and can be used to predict the changes in natural frequencies and normal modes due to structural changes. The theory was tested by running simulated tests on a relatively simple structure, identifying the parameters of the incomplete model, and using this model to predict the effects on frequency and mode shapes of several mass and stiffness changes. The conditions of the tests were varied by selecting different numbers of points of measurement, varying the frequency range, and by including assumed measurement error. It is recommended that the theoretical development be continued and that applications to more complex structures be carried out in order to develop a better understanding of the limitations and capabilities of the method. A successful, more definitive sevaluation could lead to immediate practical applications.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2018.11a
• /
• pp.55-58
• /
• 2018

본 논문에서는 가이디드 영상 필터를 (guided image filter) 이용하여 컨볼루션 신경망 (convolutional neural network) 을 이용한 역 톤 매핑 (inver tone - mapping; iTMO) 기법의 결과를 향상 시킬 수 있는 알고리듬을 제안한다. 기존 low dynamic range (LDR ) 영상을 high dynamic range (HDR ) 디스플레이에서 표현할 수 있는 역 톤 매핑 기법이 과거부터 계속 제안되어 왔다. 최근에 컨볼루션 신경망을 이용하여 단일 LDR 영상만으로 넓은 동적 범위 (dynamic range) 를 가진 HDR 영상으로 변환하는 알고리듬이 많이 연구되었다. 기존의 알고리듬 중 포화 영역 (saturated region) 으로 인해 잃어버린 화소 정보를 학습된 컨볼루션 신경망을 이용해서 복원하는 알고리듬은 그 효과가 좋지만 포화 영역이 아닌 부분의 잡음을 제거하지 못하며 포화 영역의 디테일을 복원하지 못한다. 제안한 알고리듬은 입력 영상에 가중치 기반 가이디드 영상 필터를 사용해서 비포화 영역의 잡음을 제거하고 포화 영역의 디테일을 복원시킨 다음 컨볼루션 신경망에 인가하여 결과 영상의 품질을 개선하였다. 제안하는 알고리듬은 실험을 통해서 기존의 알고리듬에 비해 높은 정량적 화질 평가 지수를 나타내었고, 기존의 알고리듬에 비해 세부 사항을 효과적으로 복원할 수 있음을 확인할 수 있었다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.3
• /
• pp.46-55
• /
• 2016

This work proposes a 13b 100MS/s 45nm CMOS ADC with a high dynamic performance for IF-domain high-speed signal processing systems based on a four-step pipeline architecture to optimize operating specifications. The SHA employs a wideband high-speed sampling network properly to process high-frequency input signals exceeding a sampling frequency. The SHA and MDACs adopt a two-stage amplifier with a gain-boosting technique to obtain the required high DC gain and the wide signal-swing range, while the amplifier and bias circuits use the same unit-size devices repeatedly to minimize device mismatch. Furthermore, a separate analog power supply voltage for on-chip current and voltage references minimizes performance degradation caused by the undesired noise and interference from adjacent functional blocks during high-speed operation. The proposed ADC occupies an active die area of $0.70mm^2$, based on various process-insensitive layout techniques to minimize the physical process imperfection effects. The prototype ADC in a 45nm CMOS demonstrates a measured DNL and INL within 0.77LSB and 1.57LSB, with a maximum SNDR and SFDR of 64.2dB and 78.4dB at 100MS/s, respectively. The ADC is implemented with long-channel devices rather than minimum channel-length devices available in this CMOS technology to process a wide input range of $2.0V_{PP}$ for the required system and to obtain a high dynamic performance at IF-domain input signal bands. The ADC consumes 425.0mW with a single analog voltage of 2.5V and two digital voltages of 2.5V and 1.1V.

• Journal of Sensor Science and Technology
• /
• v.18 no.1
• /
• pp.77-85
• /
• 2009

We propose a new image pixel architecture which has OFD(Over Flow Device) node by improving conventional 3TR pixel structure. Newly designed pixel consists of photo diode which is verified with HSPICE simulation, PMOS reset transistor, several NMOS and several PMOS transistors. Photodiode signals from each PMOS and NMOS are detected by Reset PMOS. These output signals give enough chances to detect wide operation coverage because OFD node has overflow photocurrent. According to various light intensity, we analyzed characteristic of the output voltage with a SPICE tool. Proposed pixel output has specific value which can detect possible from $0.1{\mu}W/cm^2$ to $10W/cm^2$ light intensity. It has wide-dynamic range of 160 dB.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.3
• /
• pp.281-288
• /
• 2002

This paper has realized a control system of a vibrator using PM excited Transverse Flux Linear Motor(TFLM). Proposed vibrator can supply a vibration force up to 700[N] at rated current, wide operation range of vibration displacement and high frequency for a tested structure. Also, volume of a vibrator system can be decreased because of a high trust force rato(a thrust force per weight=N/Kg). A proposed vibrator instead of a hydraulic vibrator can improve efficiency and have may advantages of maintenance and management. A desired value command is a vibration frequency and displacement in a controller for a vibrator system and a controlled values we a instant position and velocity of a mover Output value of the controller is phase current controlled by PWM converter. In this research, Dynamic simulation has been executed for analysis of a control algorithm and dvnauuc characteristics and is compared with experimental result.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.4
• /
• pp.231-241
• /
• 2006

Creating controllable, responsive avatars is an important problem in computer games and virtual environments. Recently, large collections of motion capture data have been exploited for increased realism in avatar animation and control. Large motion sets have the advantage of accommodating a broad variety of natural human motion. However, when a motion set is large, the time required to identify an appropriate sequence of motions is the bottleneck for achieving interactive avatar control. In this paper, we present a novel method for training avatar behaviors from unlabelled motion data in order to animate and control avatars at minimal runtime cost. Based on machine learning technique, called Q-teaming, our training method allows the avatar to learn how to act in any given situation through trial-and-error interactions with a dynamic environment. We demonstrate the effectiveness of our approach through examples that include avatars interacting with each other and with the user.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.49 no.1
• /
• pp.78-84
• /
• 2012

In this paper, we introduced the design technique about a Ka band receive module for millimeter wave seekers. The receiver module consists of a waveguide, circulator and transition for antenna connection, and a limiter and gain control amplifier for receiver protection. This module is comprised of a sum, azimuth and elevation channel for receiving monopules signal, and a SLB channel for the acquisition of jamming signal. In this paper, receiver gain and range of gain control dependent on ADC nonlinear characteristic was analyzed and designed for wide dynamic range receive. In the test result of the fabricated Ka-band receive, the frequency band is 1 GHz, the noise figure is as low as 8.2 dB, the gain is $56{\pm}2dB$, the dynamic range is 135 dB, the gain congtrol is more than 86 dB, the channel isolation is more than 35 dB.