Proceedings of the Korean Society of Propulsion Engineers Conference
/
2010.11a
/
pp.245-253
/
2010
The present study shows some results of developing evaporative heat exchangers with mini-channels. Heat exchangers with three different water paths were manufactured and tested to compare performances of cooling and pressure drop. Among the three types of heat exchangers, Type 2 with full-etching was proved to be the best in the cooling performances for considered operating conditions, and thus it is recommended to adopt Type 2 for its simplicity of production and outstanding performance. However, Type 1 was shown to be better when it is operated at a high air inlet temperature condition. The developed evaporative heat exchanger will be installed in Environmental Control Systems(ECSs) for aerial vehicles, and it can be used effectively in case an ECS is not only limited in its weight and volume but also required to absorb heats without supplying water (or a coolant) for a certain period of time.
Ku, Hee-Kwan;Jung, Bum-Young;Hong, Kwang;Jung, Eun-Sun;Jeong, Hyun-Jun;Park, Byung-Gi;Rhee, In-Hyoung;Park, Jong-Woon
Journal of the Korea Academia-Industrial cooperation Society
/
v.10
no.12
/
pp.3748-3754
/
2009
An integral head loss test in a test apparatus was conducted to simulate chemical effects on a head loss across a strainer in a pressurized water reactor (PWR) containment water pool after a loss of coolant accident (LOCA). The test was conducted during 30 days in the condition of a short spray, a long spray, and no materials with chemical effects. The result exhibited that the head loss was affected on amounts of the exposed materials according to spray conditions. XRD analysis of the collected precipitates showed that the precipitates were phosphate compounds. Comparison of the head loss with dissolved species concentration showed that high increase rate of the head loss resulted from the corrosion of aluminum and zinc but slow increase rate of the head loss resulted from the precipitates induced by Si, Mg, and Ca from leaching reaction at NUKON and concrete after passivation of metal specimens.
Journal of the Korean Society of Propulsion Engineers
/
v.24
no.5
/
pp.43-55
/
2020
The effect of cutted pin in front of pin-fin array was analyzed for increasing the cooling performance of gas turbine blade. The numerical simulations were conducted to figure out the flow and thermal characteristics. The base case which is staggered pin-fin array, cut pin case 1 which has X2/Dp=1.25 cut pin and cut pin case 2 which has X3/Dp=1.75 cut pin were compared. The results showed that cut pin increases the strength of the horseshoe vortex which occurred at the leading edge of pin-fin array. Furthermore, the wake effect is reduced at the trailing edge of pin-fin array. As a result, the heat transfer distribution on the endwall increases. However, the friction factor increases owing to the installation of cut pin, but the thermal performance factor is increased maximum 23.8% in cut pin case 2. Therefore, installation of cut pin will be helpful for increasing the cooling performance of pin-fin array of gas turbine blade.
Journal of the Korean Society of Fisheries and Ocean Technology
/
v.18
no.2
/
pp.91-96
/
1982
Temperature inversions are investigated by using the oceanographic data obtained in the Yellow Sea from 1965 to 1979. The temperature inversions are found in every depth in almost all areas of the Yellow Sea. While in summer, they frequently occur below thermocline in the west region of the Jeju Island. Such phenomena in winter can be explained by surface cooling effects associated with a net heat loss at the surface and a southward advection of cold water, and those in summer result from the process of mixing between the Yellow Sea Warm Current and the Yellow Sea Bottom Cold Water.
Journal of the Korea Academia-Industrial cooperation Society
/
v.17
no.11
/
pp.732-739
/
2016
In Korea, the summer is hot and humid, and much electricity is consumed for air conditioning. Thus, the simultaneous usage of an indirect evaporative cooler and a common air conditioner could reduce the sensible heat and save electricity. This study developed a U-type cross-counter flow indirect evaporative cooler (IEC) made of plastic and paper. The efficiencies were compared with those of a cross-flow IEC. The specimen was $500mm{\times}500mm{\times}1000mm$. the results show that the indirect evaporation efficiencies of the cross-counter flow sample were 6-21% higher than those of the cross-flow sample. The pressure drops of the cross-counter sample were 51-66% higher. Thermal analysis based on the -NTU method predicted the experimental data within 10%. The electrical energy saved by the use of the cross-counter flow IEC was larger than that of the counter flow IEC, and the difference increases with the velocity. However, the the cross-counter IEC is two times larger than the cross-flow IEC, which may increase the material cost and water usage.
Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
/
2003.04a
/
pp.140-140
/
2003
신선한 채소나 과일은 무게의 74~94%에 상당하는 수분을 함유하고 있는데, 이러한 수분은 자칫하면 빠져나가기 쉽다. 품질이 우수한 채소나 과일이라도 수분손실이 생기면 다시는 보충할 수 없기 때문에 겉껍질을 마르고 쭈글쭈글하게 되어 품질등급과 가격결정에 손해가 된다. 또 무게의 5~l0%까지 수분이 줄어들면 상품성을 잃게되고, 무게단위로 판매되는 채소와 과일은 수분손실이 곧 무게감소이므로 총수입도 줄어드는 원인이 된다. 따라서 채소나 과일을 수확 한 후에 수분손실이 생기지 않도록 잘 관리하는 것은 농가소득과 직결되는 중요한 일이다. 그러나 기존의 저온저장고들은 저장고 내의 상대습도가 70~85%의 범위로 조성되고 있으며, 이러한 저습도의 문제를 해결하기 위하여 저장고의 바닥에 물을 뿌리는 등의 작업을 하고 있으나 문제가 해결되지는 않는다. 이에 따라 농업기계화연구소에서는 저온저장고 내의 상대습도를 90% 이상으로 유지할 수 있는 유닛쿨러를 '01년에 개발하였고,'02~'03년에 이것을 실제로 농가의 저온저장고에 설치하여 그 효과를 실증하였는데 그 결과를 요약하면 다음과 같다. 1. 현장연구에 사용된 저온저장고는 천안시에 있는 이진기 농가의 25평형 배 저온저장고 2동이었으며, 한 동은 시험구로 한 동은 대조구로 사용하였다. 2. 배의 저장온도는 0~-0.2$^{\circ}C$이었고, 상대습도는 대비 저온저장고의 경우 75~90% 범위에 있었으나 신기술투입 저온저장고에서는 98%로 유지되었다. 또 냉각기에 생기는 얼음을 제거하기 위해 작동되는 전기히터의 작동시간은 대비 저온저장고에서는 하루에 7회, 회당 45분 씩 이었고, 신기술 투입 저온저장고에서는 하루에 1회, 회당 30분 씩 이었다. 3. 배를 플라스틱 상자에 담아 저장할 때 대비 저온저장고에서는 111일 동안에 11.7%의 중량감모가 발생하였으나, 신기술투입 저온저장고에서는 5.6%의 중량감모만이 발생하여 약 50%의 중량감모를 줄일 수 있었으며, 배의 색깔이나 경도도 대비구 보다 우수하였다. 4. 배를 비닐로 포장하여 대비 저온저장고에 저장한 경우와 비닐로 포장하지 않고 신기술투입 저온저장고에 저장한 경우를 비교할 때 11월~다음해 1월 까지는 중량감모, 과피색깔 및 경도에 큰 차이가 없었으나, 2월부터는 비닐로 포장하여 대비 저온저장고에 저장한 배의 품질변화가 급격히 증가되어 중량감모, 과피색깔 및 경도가 신기술 투입시 보다 급속하게 나빠졌다.
The Transactions of the Korean Institute of Power Electronics
/
v.3
no.4
/
pp.307-314
/
1998
A novel high power factor Dual Half Bridge Series Resonant Inverter (DHB-SRI) for an induction heating appliance with multiple loads is proposed to remove the interferential acoustic noise caused by the difference between operating frequencies of adjacent loads. The circuit enables independent full power range control of two induction heating elements by one inverter circuit and has minimum switching losses due to the zero voltage switching characteristic. According to the mode analysis, I will explain the operation of the proposed circuit. To evaluate the required cooling capacity, loss analysis is performed through deriving some loss equations. In order to obtain the power factor correction capability and to lessen the system size, suitable design guides are given. Using the designed values, the proto-type circuit with 2.8kW power consumption for each induction heating element is built and tested to verify the operation of the proposed circuit.
Proceedings of the Korean Institute of Surface Engineering Conference
/
2018.06a
/
pp.113-113
/
2018
환경 친화형 전기자동차, 하이브리드 자동차, 전철 등에서는 고내압 및 소형으로 전력손실을 감소시킬 수 있는 파워 디바이스가 필수이다. 최근, 실리콘 카바이드(SiC, silcon carbide)는 기존 실리콘(Si)보다 스위칭 손실의 저감 및 고온환경에서의 동작 특성이 우수하여, 차세대 저 손실 전력반도체 재료로서 기대를 받고 있다. 용액 성장 법에서 고품질 SiC 결정을 만들 수 있다. 그러나 늦은 성장 속도 때문에 SiC의 양산을 어렵게 하고 있다. 현재까지 성장 속도 향상을 위한 Si용매에 Cr을 첨가하여 탄소 용해도를 높이는 방법이 사용되고 안정된 성장을 위한 Si-Cr용매에 Al를 첨가하는 등 다양한 금속을 첨가하는 방법이 이용되고 있다. 선행 연구에서는 다양한 용매인 탄소 용해도를 실측하고 특히 큰 탄소 용해도를 보인 것은 Co이었다. 본 연구에서는 $Si_{0.6}Cr_{0.4}$원료와 Co를 첨가한 $Si_{0.56}Cr_{0.4}Co_{0.04}$의 용매에 의한 SiC용액 성장을 실시하고 결정 성장 속도 및 표면 상태의 변화를 검토했다. on-axis 4H-SiC(000-1)을 사용한 Top-seeded solution growth(TSSG)법과 원자 비율로 $Si_{0.6}Cr_{0.4}$와 $Si_{0.56}Cr_{0.4}Co_{0.04}$의 용매를 이용하여 SiC 용액 성장을 실시했다. Ar가스에서 저항 가열로 내를 치환 후에 $1800^{\circ}C$까지 가열하고 종자화 후에 120분간 유지하고 결정 성장을 실시했다. 냉각 후에 성장의 표면에 남은 용매를 $HF+HNO_3$에서 제거했다. 광학 현미경을 이용하여 결정면과 두께를 관찰 측정했다. Co를 첨가한 $Si_{0.56}Cr_{0.4}Co_{0.04}$의 경우는 $Si_{0.6}Cr_{0.4}$의 경우보다 결정 성장 속도가 향상됐다. 또한 $Si_{0.6}Cr_{0.4}$보다 step-flow의 성장을 나타낸 결정의 표면이 전반적으로 관찰됐으며 안정된 결정성장을 나타냈다. 본 연구에서 실시한 연구 방법과 결과는 고품질 및 고속의 SiC 용액성장을 위한 매우 유용한 자료로 활용 될 수 있을 것으로 판단한다.
In this paper, we propose the development of nitrogen cooling equipment for personalized local area. The proposed equipment consists of a cold air supply module, a body, and nitrogen injection with the following characteristics. First, it automatically controls the amount and time of cold air supply by utilizing information measuring skin temperature with volumetric temperature sensors, so it can have a competitive edge in function by ensuring complete safety. Second, if the distance measuring sensor is applied to the skin for more than a certain distance, it can block the cold air or control the discharge of nitrogen in conjunction with the control GUI to improve the efficiency of higher cooling therapy while providing safe management. Third, by installing a control module that can control the supply of nitrogen, the cost of maintenance can be minimized by minimizing the loss of nitrogen. Experiments at an external testing agency to evaluate the performance of the proposed equipment showed that the accuracy of the temperature sensor was measured in the range of ±3.8%, which is lower than the world's highest level(±5%), with a range of 110℃ to -160℃ similar to the world's highest level. Distance accuracy was measured in the range of ±3.0%, lower than the world's highest level(±5%), and weight accuracy in the range of ±0.1%, lower than the world's highest level(±5%). In addition, emission control was measured in four stages, higher than the world's highest level(stage 1) and nitrogen use was measured at 0.8L/min below the world's highest(6L/min). Therefore, the effectiveness of the methods proposed in this paper was demonstrated because they produced the same results as the world's highest levels.
A dual side cooling annular fuel having internal and external coolant channels has many advantages basically due to low fuel temperature and high DNBR margin, which can make a significant increase of core power density possible. So recently a 12x12 square annular fuel array was proposed for the fuel assembly to be reloaded without structural interference with operating reactors of OPR-1000s. Even through the inherent potential of the annular fuel on the high power density, it may be seriously eroded in the case of a severe unbalanced mass flux split to the internal and external channels in standpoint of DNB. Mass flux split is determined pressure drop characteristics between inner and outer channels. The spacer grids binding fuel array influence greatly the pressure drop in outer channels and the mass flux split. As an important factor of DNB behavior, the enthalpy differences at both channel exits were evaluated using the mass flux splits.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.