• The Journal of Engineering Geology
• /
• v.7 no.3
• /
• pp.173-189
• /
• 1997

A study on the geological structure and geothermal gradient distribution was carried out to evaluate the feasibility of developing a new geothermal field in the Yusong area. It is suggested that geothermal water in the Yusong area is closely related with faults, dykes, and their dipping characteristics with the study of geothermal gradient distribution. A fault of EW direction locates in northern boundary of the study area and another fault of N40{\citc}W$ crosses the EW fault at the western part of the study area. Locations of faults are recognized quite well by lineaments, geophysical exploration and geothermal gradient distribution characteristics. Three sets of dyke are found in the study area. According to the result of the geothermal gradient distribution study, the location of geothermal anomaly belt and dykes coincide each other, and the area has the temperature gradient of larger than 3$^{\circ}C$ between the depths of 0.5m and 1.0m below ground surface. The thermal anomaly belt those temperature gradient is larger than 2.5$^{\circ}C$ between the depths of 0.5m and 1.Om below ground surface is expected in the direction of N80{\citc}W$ in the study area. The dirping of dyke is almost vertical according to the linear distribution of dykes on surface and the results of geophysical survey. From the distribution of geothermal anomaly belt and the locations of dyke, three locations for the development of hot spring water could be recommended and the depth that ensure over 4$0^{\circ}C$ geotheraral water is estimated as 170~200m below the ground surface.

• Elastomers and Composites
• /
• v.48 no.1
• /
• pp.67-75
• /
• 2013

E-TPE (Engineering Thermoplastic Polyether Ester) was Ester Elastomer with functional groups as recycling and fast processability. In addition, if the car's lightweight enough to highlight eco-friendly materials that help to improve fuel economy has become. Have all the attributes of the rubber and engineering plastics E-TPE the available temperature area is spacious, heat resistance and oil resistance is excellent but getting attention as a new material in the field of auto parts in the field of electrical and electronic domestic depends entirely on imports by the lack of core technology and has been research and development is urgently needed. In this study, the hard segments, polyester (TPEE) as the base soft elastomers of the segments Ethylen-prophylene-Copolymer and CSM (Choloro sulphonated polyethylene Rubber), VAMAC (Ethylene Acrylic Rubber), NBR (Acrylonitrin Butadiene Rubber), 1, 3-Phenylene-bisoxazoline is dealing with Dynamic Vulcanized by content and added rubber properties, thermal variation observed. As a result, the properties of the dynamic vulcanization with NBR compared to other rubber heat resistance and oil resistance is on the increase.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.460-468
• /
• 2021

This study investigated the enhanced combustion efficiency of an "air-cooled combustion system" with single F.D. fan, and performed a numerical analysis for the operation and design conditions to increase the combustion efficiency. The combustion efficiency in an actual combustor was compared before and after the structure modification. Numerical analysis for application of a single fan revealed the difficulty of forming a turbulence for circular combustion conditions. This is because the supply ratio of combustion air supplied into 2 flow paths becomes irregular in the combustion furnace due to a change in friction force and pressure in each flow path. Subsequently, two methods of supplying air into the combustion furnace were analyzed numerically to obtain the optimal combustion conditions of an air-cooled combustion system. The first method involved injecting the preheated combustion air after a 180~360 degree rotation from the outer wall, whereas in the second method, the combustion air was injected into the combustion furnace in a tangential direction after primary heat exchange outside the combustion furnace, by applying a rotatable vane structure in the combustion furnace. Results reveal that application of a single F.D. fan to the air injection into a rotatable combustion furnace is desirable for optimization of the combustion conditions for applying a duct structure having a dual cooling wall for the cooling of the outer wall of the combustion furnace, and for maintaining perfect mixing in the combustion furnace. We therefore confirmed enhanced combustion efficiency by comparing the actual combustion efficiency before and after structure modification.

• Polymer(Korea)
• /
• v.34 no.3
• /
• pp.215-219
• /
• 2010

Nitrile rubber (NBR) composites were prepared using the commercially avaliable rubber compounding process with Cloisite$^{(R)}$ 10A or carbon black as fillers. When Cloisite$^{(R)}$ 10A was used as a filler in the NBR composites, the mechanical properties, oil resistant, and oxygen barrier were better than those for carbon black composites. In cure characteristics of NBR/clay composites, scorch time and curing time were reduced. It was found that alkyl ammonium ion inserted in Cloisite$^{(R)}$ 10A was considered as an accelerator of vulcanization for NBR composites.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.462-463
• /
• 2018

Traditional document analysis systems used word-based analysis using a morphological analyzer or TF-IDF technique. These systems have the advantage of being able to derive key keywords by calculating the weights of the keywords. On the other hand, it is not appropriate to analyze the contents of documents due to the structural limitations. To solve this problem, the proposed algorithm calculates the weights of the documents in the document and divides the paragraphs into areas. And we calculate the importance of the divided regions and let the user know the area with the most important paragraphs in the document. So, it is expected that the user will be provided with a service suitable for analyzing documents rather than using existing document analysis systems.

• The Journal of the Acoustical Society of Korea
• /
• v.13 no.5
• /
• pp.69-76
• /
• 1994

Acoustic cues of some consonantal phonology were tested in Korean words. All Korean consonants were recorded and acoustically analyzed in controlled phonological environments :ⅰ) word-initial, ⅱ) inter-vocalic, and ⅲ) word-final positions. The observed acoustic regulations are : ⅰ) The lengths of obstruents are longer word-initially than word-finally, ⅱ) The lengths of sonorants are longer word-finally than in word-initial or inter-vocalic positions, ⅲ) The formants of the lateral sound /l/ are higher word-finally than intervocalically. The phonological explanations of these acoustic regulations can be found in the rules of ⅰ) inter-vocalic voicing of plain stops, ⅱ) syllable-final unreleasing of obstruents, ⅲ) word-initial aspiration of stops, and ⅳ) liquid alternation between [r] and [l]. Numerical data of all these acoustic regulations are reported in order to facilitate their application toward improving naturalness for speech synthesis and accurateness for speech recognition.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2008.04a
• /
• pp.60-74
• /
• 2008

일반적으로 종이 도공의 바인더로 사용되는 라텍스는 입자경이 작을수록 도공층이 부동화 되기 전에 도공층 내에서 원지 혹은 도공층 표면으로의 이동 특성이 강해져서 최종 도공지의 인쇄적성에 다양한 품질의 변화를 보일 수 있다. 라텍스는 원지와 접촉하는 순간부터 원지의 특성에 따라 원지 방향으로 1차 마이그레이션이 일어나고 건조공정의 건조조건(IR-Infra Red 혹은 Hot Air Dryer)에 따라 도공층 표면으로의 2차 마이그레이션이 일어나며 이로 인해 도공층 내에서 Z-방향으로 바인더 분포가 불균일하게 분포하게 됨으로서 인쇄 모틀 현상에도 영향을 미치게 된다. 따라서 본 논문에서는 도공액의 농도와 라텍스의 입자경 그리고 건조조건에 따른 도공층의 구조변화가 최종인쇄적성에 미치는 상관성을 검토하였다.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.8
• /
• pp.24-30
• /
• 2001

This article is concerned with automatic segmentation for Korean speech signals. All kinds of transition cases of phonetic units are classified into 3 types and different strategies for each type are applied. The type 1 is the discrimination of silence, voiced-speech and unvoiced-speech. The histogram analysis of each indicators which consists of wavelet coefficients and SVF (Spectral Variation Function) in wavelet coefficients are used for type 1 segmentation. The type 2 is the discrimination of adjacent vowels. The vowel transition cases can be characterized by spectrogram. Given phonetic transcription and transition pattern spectrogram, the speech signal, having consecutive vowels, are automatically segmented by the template matching. The type 3 is the discrimination of vowel and voiced-consonants. The smoothed short-time RMS energy of Wavelet low pass component and SVF in cepstral coefficients are adopted for type 3 segmentation. The experiment is performed for 342 words utterance set. The speech data are gathered from 6 speakers. The result shows the validity of the method.

• Journal of the Korean Society of Groundwater Environment
• /
• v.7 no.1
• /
• pp.32-46
• /
• 2000

Hydrogeochemical and isotope ($\delta$$^{18}$ O, $\delta$D, $^3$H, $\delta$$^{13}$ C, $\delta$$^{34}$ S, $^{87}$ Sr/$^{86}$ Sr) studies of various kinds of waters (thermal groundwater, deep groundwater, shallow groundwater, and surface water) from the Yusung area were carried out in order to elucidate their geochemical characteristics such as distribution and behaviour of major/minor elements, geochemical evolution, reservoir temperature, and water-rock interaction of the thermal groundwater. Thermal groundwater of the Yusung area is formed by heating at depth during deep circlulation of groundwater and is evolved into Na-HCO$_3$type water by hydrolysis of silicate minerals with calcite precipitation and mixing of shallow groundwater. High NO$_3$contents of many thermal and deep groundwater samples indicate that the thermal or deep groundwaters were mixed with contaminated shallow groundwater and/or surface water. $\delta$$^{18}$ O and $\delta$D are plotted around the global meteoric water line and there are no differences between the various types of water. Tritium contents of shallow groundwater, deep groundwater and thermal groundwater are quite different, but show that the thermal groundwater was mixed with surface water and/or shallow groundwater during uprising to surface after being heated at depths. $\delta$$^{13}$ C values of all water samples are very low (average -16.3$\textperthousand$%o). Such low $\delta$$^{13}$ C values indicate that the source of carbon is organic material and all waters from the Yusung area were affected by $CO_2$ gas originated from near surface environment. $\delta$$^{34}$ S values show mixing properties of thermal groundwater and shallow groundwater. Based on $^{87}$ Sr/$^{86}$ Sr values, Ca is thought to be originated from the dissolution of plagioclase. Reservoir temperature at depth is estimated to be 100~1$25^{\circ}C$ by calculation of equilibrium method of multiphase system. Therefore, the thermal groundwaters from the Yusung area were formed by heating at depths and evolved by water-rock interaction and mixing with shallow groundwater.

• Journal of the Korean Society of Visualization
• /
• v.9 no.4
• /
• pp.16-21
• /
• 2011

The effects of stroke change on turbulent kinetic energy for the in-cylinder flow of a four-valve SI engine were studied. For this study, the same intake manifold, head, cylinder, and the piston were used to examine turbulence characteristics in two different strokes. In-cylinder flow measurements were conducted using three dimensional LDV system. The measurement method, which simultaneously collects 3-D velocity data, allowed a evaluation of turbulent kinetic energy inside a cylinder. High levels of turbulent kinetic energy were found in regions of high shear flow, attributed to the collisions of intake flows. These specific results support the more general conclusion that the inlet conditions play the dominant role in the generation of the turbulence fields during the intake stroke. However, in the absence of two counter rotating vortices, this intake generated turbulent kinetic energy continues to decrease but at a much faster rate.