Metal oxide(MgO) was added to FKM rubber in order to develop automotive fuel hose which ran show elastic characteristics under extreme condition. Cure characteristics, physical properties, thermal resistance and fuel resistance of FKM compounded rubber with MgO were investigated. MgO was mixed to FKM rubber materials within the range of $0{\sim}20phr$. From the test results of rheological properties and Mooney viscosity, the $t_{s2}$, $T_{c90}$ values increased as the MgO contents increased in FKM rubber compounding. Hardness and 100% modulus of FKM compounded rubber slightly increased, but tensile strength and elongations at break slightly decreased. From the test results of thermal resistance of rubber specimens at 130, 150, and $170^{\circ}C$ for 70 hrs, the changing rate of physical properties was found to be relatively small. Fuel resistance tests were carried out for fuel A, B, C and D at $40^{\circ}C$ for 70hrs, and the results showed that the changing rate in physical properties was found to increase from Fuel A to D, Furthermore thermal properties of FKM compounded rubber containing MgO were also investigated by using TGA/DSC. The optimum mixing ratio of additive to FKM rubber to get the maximum effect on thermal resistance and fuel resistance, within the range of desirable specification for rubber material, was determined to be 6 phr for MgO.
Journal of the Society of Cosmetic Scientists of Korea
/
v.48
no.4
/
pp.313-319
/
2022
In this study, the stability of cream containing 1% of cannabidiol (CBD) with more than 99% extracted from domestic Cannabis sativa was evaluated. The pH, hardness, content, and chromaticity were measured at intervals of 2 weeks under storage conditions for each temperature for 12 weeks (4 ℃, 25 ℃, 37 ℃, and 45 ℃). The pH of the experimental group containing 1% of CBD tended to decrease more than that of the control group. As a result of measuring the change in the content of CBD in the cream under each temperature for 12 weeks using HPLC, the difference in the amount of decrement according to temperature was confirmed. It was confirmed that as a result of measuring the chromaticity using color difference meter, the yellowness of the cream containing CBD increased according to the increase by the storage period and temperature compared to the control group. From the above results, it was confirmed that the content decrease and color change according to the temperature of the pH 5 ~ 6 cream formulation containing CBD. When CBD is applied to medicine and cosmetic formulations in the future, it is considered that research and development should be conducted in consideration of the change in the quantity and physicochemical quality of CBD under the temperature.
This study is about a technique for obtaining collagen by extracting fat by treating collagen-containing liposuction effluent in the presence of supercritical fluid. Using a supercritical solvent, a collagen extract could be obtained from animal-derived fat in a short time (about 6 hours), and about 2-3% of collagen by mass compared to the raw material could be obtained. The presence of collagen in the extract obtained by supercritical extraction was confirmed by SDS-PAGE, and it was confirmed that it was type 1 collagen having a relatively large molecular weight. In addition, the growth factors of IGF-1, bFGF, VEGF and NGF were analyzed to find out which growth factors were present in the collagen obtained by supercritical extraction, and it was found that these growth factors were contained in the extract. There was no significant difference in DNA content per mg of sample before and after supercritical treatment. Further in-depth studies are likely to be needed on decellularization technology using the supercritical process. In conclusion, the extracellular matrix obtained through the solvent extraction process using a supercritical fluid contains growth factors above a certain amount even after decellularization and removal of fat, so that it was found that not only biocompatibility is greatly increased, but also tissue regeneration can be rapidly induced.
Journal of the Korean Recycled Construction Resources Institute
/
v.11
no.2
/
pp.153-160
/
2023
In this study, nano-sized C-S-H crystals were synthesized using the liquid phase reaction method and their properties were investigated. The synthesized C-S-H crystals were added to the cement composite in suspension form to determine their effect on the hydration properties of the cement. The amount of chemical admixture was varied to obtain nano-sized C-S-H crystals with optimal agglomerated morphology, and SEM photographs were analyzed. A cleaning process was added to remove harmful substances other than the synthesiz ed C-S-H crystals. It was found that the concentration of harmful substances was reduced in the case of C-S-H crystals subjected to the cleaning process. The synthesized C-S-H suspensions were prepared with and without the cleaning process, and cement composites were prepared with the cement weight content as the main variable. The effect of C-S-H crystals on the initial hydration properties of the cement was confirmed by microhydration heat analysis. In addition, mortar specimens were prepared to measure the compressive strength over time. The test results showed that the nano-sized C-S-H crystals act as nucleation sites in the cement paste to promote the early hydration of the cement and increase the early compressive strength.
The purpose of this study was to investigate the views of Joseon held by Kano Jigoro, who was the creator of judo and spread the martial arts ideology across the world, to shed light on the fundamental essence of the martial arts ideology spread around Korea. Conducted in this perspective, the study generated the following results: first, Kano Jigoro grew up, receiving history education from classical scholars of Japan. He was accordingly influenced by the Seikanron, which argues that Empress Jingu, a mythical character, conquered Silla, Baekje and Gaya. The Seikanron became the basis of the Imna Ilbonbu theory during the Japanese rule and was projected onto martial arts ideas Jeongryeokseonyong and Jatagongyeong that were completed by Kano Jigoro and introduced into Joseon. Secondly, Kano Jigoro distributed and expanded the tale of statehood in the prism of martial arts ideology since the Meiji Restoration, which was possible because he connected his martial arts ideas to the statehood of Japan. As a result, they were used as the logic of Korea and Japan are One in Joseon unlike the rest of the world where they were applied as peace ideas. Finally, his martial arts ideology introduced into Joseon during the Japanese rule went through acculturation and showed the contradiction of being interpreted differently according to different individuals. Most Japanese people made use of his martial arts as a means of the Korea and Japan are One policy, whereas the pioneers of the Korean people excluded Kano Jigoro's view of state, included the nationalistic features in it, and trained their martial arts as a means of overcoming the national crisis.
This article purposes to investigate opening process of the 21st National Assembly in the middle of severe conflicts between two major-parties, and predict the changes it will bring to the operation of the National Assembly. With incumbent party's taking all leadership positions of standing committees, it broke the practice since 13th National Assembly, that is, distribution of the standing committees based on the seat-ratio. It means that our National Assembly has entered a new phase in the decision-making process. While the incumbent party, with overwhelming victory in general election, emphasizes that it should dominate legislative process to support the government, the out-party claims that they should take leverage to check over government. Two opposing trends are characteristically observed in the operation of the Korean National Assembly. First of all, due to the experience under authoritarian regimes, the National Assembly has been institutionalizing decision-making processes in the direction of enforcing cooperation between parties. On the other hand, the polarization in political parties has been stronger, making it difficult to reach consensus between parties. This article claims strongly that the 21st National Assembly need to find a balance amid such two-conflicting trends. To do so, three necessary conditions are proposed: observing decision-making procedures, securing diversity within party and National Assembly, and deliberative legislative activities.
Jeong Gul Jang;Sung-Tae Yu;Byung-Do Kim;Myung-Hoon Yi;Hye-Yeon Kwon
Proceedings of the Plant Resources Society of Korea Conference
/
2021.04a
/
pp.21-21
/
2021
주걱댕강나무는 경남 양산의 천성산에서만 생육하는 산림청·국립수목원 지정 희귀식물(Critically Endangered, CR)로 현지외 보전 및 대체 서식지 조성을 위해 번식 특성에 대해 알아보았다. 종자번식의 경우 450립의 종자를 저장방법에 따라 파종한 결과 노천매장 3.56%, 저온건조저장 0.67%, 습사저온저장 0.22%로 발아율이 매우 저조하였으며, 배양토 조건에 따라 직파 실험한 결과 모래 2.44%, 원예용 상토 2.22%, 현지내 산림토 1.11%, 현지외 산림토 0%로 이 또한 발아율이 매우 저조하였다. 삽목번식의 경우 숙지삽은 모래+펄라이트 36.1%, 모래 31.1%, 원예용 상토 20.0%로 나타났으며, 휴면지 삽수의 발근촉진제 처리 효과는 IBA 1,000PPM에서 37.8%, IBA 7,000PPM 30.0%, 무처리 28.9%, IBA 5,000PPM 27.8%의 발근율을 보였고 신초길이, 뿌리의 수, 뿌리 길이는 전반적으로 발근촉진제 처리와 함께 농도가 높아질수록 뿌리 성장이 왕성한 것으로 나타났다. 녹지삽은 모래 80%, 모래+펄라이트 76.7%, 피트모스+마사토 73.3%, 피트모스+펄라이트+버미큘라이트 70.0% 순이며, 왕모래와 왕모래+마사토는 26.7%와 36.7%로 다소 저조하였다. 녹지삽수의 굵기는 4mm이상 구간에서 발근율이 73.3%로 가장 높았으며, 녹지삽수의 길이는 7~8cm 구간에서 80.0%로 가장 높게 나타나 삽수의 굵기가 굵고 8cm내외의 길이가 효율적인 것으로 나타났다. 근삽은 발아율이 88.3~96.7%로 모든 배양토에서 높게 나타났다. 근삽수 직경 7~8mm에서 100%이며 3~4mm 또한 91%로 나타났다. 근삽수 길이는 4~5cm와 10~11cm에서 100%, 6~7cm 88.1%, 8~9cm 94.4%로 나타나 4~5cm를 제외하고는 삽수 길이가 길수록 신초 생장과 발근이 비례하는 것을 확인하였다. 주걱댕강나무는 실생보다 삽목번식이 더 효율적이며, 그 중 근삽이 가장 발근율이 높다. 배양토는 모래 단용구를 제외하고는 평균 95%이상으로 나타났으며, 근삽수는 직경이 굵고 길수록 신초 생장과 발근이 왕성하다. 따라서, 현지외 보전을 위해 향후 휴면성의 종자 발아 연구가 필요하며, 영양번식을 할 경우 근삽이 가장 효율적인 것을 확인하였다.
Journal of The Korean Society of Grassland and Forage Science
/
v.34
no.4
/
pp.288-295
/
2014
This study was conducted to evaluate the effect of mixing time for TMR (total mixed rations) mixed with corn silage on particle size, peNDF (physically effective neutral detergent fiber), laceration, and ruminal in situ dry matter degradation. The study also aimed to evaluate the effect of consumption of the TMR on the milk yield and milk components of mid-lactational dairy cows. TMRs were mixed for 30 minutes (T1) and 50 minutes (T2) using the same material. All samples were then analyzed with a Penn State Particle Size Separator (PSPS). The particle size of T1 was significantly lower in the bottom pan (8 mm>) than that of T2 (p<0.01). $peNDF_{>8.0}$ was significantly higher in T1 (17.18%) than in T2 (13.85%) (p<0.01). For ruminal in situ dry matter degradation of particle retention (>19 mm), no significant difference was found after 72 hours incubation, although T1 degradation was significantly higher after 24 hours incubation (p<0.01). Milk yield was no different between the groups of cows, whereas the milk fat from T1 fed cows was significantly higher (p<0.01). The results show that feeding TMR mixed for 30 minutes to dairy cows may improve the physical value of forage without negative effects on the milk yield and milk components.
Ki, Kwang Seok;Lim, Dong Hyun;Park, Seong Min;Lim, Hyun Joo;Park, Su Bum;Kim, Tae Il;Jeong, Seok Geun;Baek, Kwang Soo;Kwon, Eung Gi;Lee, Se Young
Korean Journal of Food Science and Technology
/
v.47
no.3
/
pp.359-363
/
2015
This study was conducted to investigate the differences in the physicochemical properties of organic and conventional milk from Chungnam and Jeonbuk, Korea. The milk was collected from 10 organic and 10 conventional milk farms in February, March and August, and then analyzed for milk composition, minerals and fatty acids. Organic milk showed lower fat (p<0.01) and total solid (p<0.05), but higher phosphorous (p<0.01) content than conventional milk. However, there was no difference in the content of lactose or the somatic cell count. Organic milk showed lower (p<0.01) stearic acid and total saturated fatty acid content, but higher (p<0.01) total, mono-, and poly-unsaturated fatty acid content. These results showed that organic and conventional milks differ mainly in their fat and unsaturated fatty acid content. Due to increasing consumer interest in food safety and health, organic milk, which contains more beneficial fatty acids, might be preferred over conventional milk.
The movement of tooth-bone segments by osteotomy can simultaneously shift tooth and surrounding alveolar bone in a relatively short period. The purpose of this study was to evaluate the tissue changes in pulp, periodontal ligament, and alveolar bone in rapid tooth-bone movement with osteotomy. The mandibular 3rd premolar of a dog was extracted and cortical bones of the buccal and lingual area were eliminated, and then cortical bones around the mesial and distal area of root, and below the root apex of the mandibular 4th premolar were osteotomized. After a one-week latency period, a tooth-borne distraction device was activated for 6 days. And pulp, periodontal ligament and alveolar bone were evaluated clinically, radiologically, histologically and immunohistochemically at 0, 1, 2, 4, 6, 8 weeks of the consolidation Period and conclusions were roached as follows. 1. Latency period didn't affect total amount or tooth movement and healing process of tissue during consolidation period. 2. Bone formation continued through 8 weeks of consolidation in distracted side, with a high peak at 1-2 weeks, and the lowest at 6-8 weeks or consolidation. 3. At 1 week of consolidation, alveolar bone resorption, osteoclast appearance and inflammatory cell infiltration were the most active, and dentinoclasts characteristically appeared on the pulp and pressure side of the periodontal ligament. 4. The expression of $TGF-\beta$ was area-specific, as it was strong-positive at bone matrix, osteoblast osteoclast of alveolar bone, and dentinoclast inside pulp, but weak in pulp, cementoblast and acellular cementum. 5. The expression of $TGF-\beta$ was generally observed at the initial 1-2 weeks of consolidation at vessels, periodontal ligament cells, and osteoblast near alveolar bone on the distraction side of the periodontal ligament, and was significantly decreased after 6 weeks of consolidation.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.