• Journal of Energy Engineering
• /
• v.17 no.4
• /
• pp.189-197
• /
• 2008

In this study, a system to measure continuously the fuel concentration in a steady flow rig on the basis of Rayleigh scattering is presented. The system can be employed to measure both the temporal and the spatial distribution. Also, it is possible to calibrate the system for the measurement of accurate absolute concentration. Firstly, the system was tested at a calibration chamber for the determination of scattering cross section from propane, butane, acetylene, Freon-12 and Genetron 143a. After this, the system was adapted to a steady flow rig to measure the temporal and spatial fuel concentration. The rig is composed of cylinder head, intake manifold, injector, and transparent cylinder which can simulate internal combustion engine. To cope with the interference of Mie scattering, which is main obstacle of the measuring concentration with Rayleigh scattering, a hardware filter was installed for reducing the number density of particles. Furthermore a software filter was developed, which is based on the rise time and the time constant of the photomultiplier-amplifier system. In addition, background noisy was reduced by adjusting the optical array and applying the pin hall and beam trap. The results show that LRS can provide useful information about concentration field and the software filter is very effective method to remove Mie interference.

• Journal of Energy Engineering
• /
• v.24 no.4
• /
• pp.42-47
• /
• 2015

While the oxygen content of gasoline for automobiles in Korea is regulated to less than 2.3 weight %, European and World-Wide Fuel Charter (WWFC) regulate it to less than 2.7 weight %. The oxygen content of oxygen-containing materials increases the octane number of the fuel due to the secondary combustion in the internal combustion engine. It has been reported to be effective in reducing emissions, such as CO, HC, which is caused by incomplete combustion. Before 2000s in the United States and Europe, there has been many researches about vehicle application of the changes in oxygen content of gasoline. However, there are not many domestic researches which reflect the improvement of the fuel quality and automotive technology. In this study, fuels of three different oxygen contents were applied to GDI and MPI engines. As a result, the changes of fuel consumption and emission gas were very similar depends of the oxygen content changes. The PN in GDI engine was decreased as the oxygen content was increased.

• Journal of the Korean Magnetics Society
• /
• v.25 no.6
• /
• pp.189-197
• /
• 2015

As enforced the regulation of fuel efficiency, the electrification of automotive components in internal combustion vehicle has been applied instead of hydraulic pressure. A typical example of such parts is the EPS (electric power steering), and it is applied to most automotive at present. In electric power steering system, the core component is motor. The reduction of cogging torque and torque ripple is required to improve steering feeling and reduce NVH (Noise Vibration Harshness) in EPS. Generally the skewed design of stator or rotor is applied in order to reduce cogging torque and torque ripple. This paper propose the design and analysis methodology of Brusheless PMSM (Permanent Magnet Synchronous Motor) which is applied to skewed stator. The proposed methodology is as follows: First Intial Design PMSM with skewed stator for EPS, Second Optimal design using RSM (Response surface method), Third Performance Analysis such as Phase Back EMF, Inductance, Load torque using FEA (Finite Element Method). Finally, the reliability of proposed design methodology will be verified through the experiments of prototype sample.

• Membrane Journal
• /
• v.27 no.1
• /
• pp.68-76
• /
• 2017

Flat membrane with $0.4{\mu}m$ pore size was prepared with PVdF (polyvinylidene fluoride) nanofiber, which has the advantages such as excellent strength, chemical resistance, non-toxicity, and incombustibility. The spiral wound module was manufactured with the flat membrane and a woven paper. Hybrid water treatment process was composed of the PVdF nanofibers spiral wound microfiltration and granular activated carbon (GAC) adsorption column. Effect of GAC packing mass was investigated by comparing the case of recycling or discharging the treated water using the synthetic solution of kaolin and humic acid. After each filtration experiment, water back-washing was performed, and recovery rate and filtration resistances were calculated. Also, effect of GAC adsorption was compared by measuring turbidity and $UV_{254}$ absorbance. As a result, there was no effect of GAC packing mass on turbidity treatment rate; however, the treatment rate of $UV_{254}$ absorbance was 0.7~3.6% for recycling the treated water, and increased to 3.2-5.7% for discharging the treated water. In the case of recycling the treated water, reversible filtration resistance ($R_r$) and irreversible filtration resistance ($R_{ir}$) trended to decrease as increasing GAC packing mass; however, total fitration resistance ($R_t$) was almost constant, and recovery rate of water back-washing trended to increase a little.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.1
• /
• pp.67-72
• /
• 2017

This study developed an electric power propulsion personal watercraft by combining a battery and an electric system from the domestic automobile industry with water motorcycle from marine leisure industry in a convergence of technology. It also developed a safety inspection plan and type approval standard for personal watercraft that use electric power propulsion. For the registration and production of the electric power PWC (Personal Watercraft), a safety inspection standard (draft) and type approval standard (draft) have been established. PWC that use this electric power propulsion certification standard have been divided into two categories according to the use of gasoline engines as related to the ship's electrical system. The contents of these safety inspections standards is divided into 7 categories, and their purpose is to confirm the facilities used for the safe operation of PWC. Type approval is divided into 7 categories and is intended to ensure the safe production of PWC. This is basic data can be used to establish criteria for safety inspection and type approval of electric power propulsion vessels and to guide the production of the environmentally friendly PWC in Korea.

• Journal of the KSME
• /
• v.29 no.6
• /
• pp.573-580
• /
• 1989

현재 한국의 자동차 공업은 80년대 초반부터 급격한 발전으로 세계의 다른 자동차 생산국으로부 터 경계의 대상이 되고 있다. 그러나 그 내면을 살펴보면 아직도 중요한 기술은 거의 대부분 일 본이나 독일, 미국 등 자동차 선진국의 기술에 의존하고 있으며 특히 엔진 분야는 대부분 외국 기술에 의존하고 있다고 해도 과언이 아니다. 엔진은 자동차 생산원가의 약 30%를 차지하며 자동차의 성능을 좌우하는 경우 기술료 지급은 물론이며 부품구매 선택의 여지가 없어진다. 또한 요즈음과 같이 상품의 수명주기가 짧게 되어 가는 추세 하에서는 시장의 요구에 대처해나가는 엔지니어링 적응력이 부족하게 되면 결국 경쟁성을 상실하게 된다. 그러나 이러한 문제점을 인 식하면서도 80년대 초까지 독자적인 엔진개발을 하지 못했던 원인은 크게 2가지로 분석할 수 있다. 첫째는 한국의 자동차 회사들의 기술 축적의 미약과 둘째는 독자개발의 낮은 투자효율성 이다. 즉 엔진과 변속기를 기술 도입할 때 기술료 지급은 자동차 생산댓수당 5-6만원에 달하지만 엔진과 변속기를 독자개발시의 투자비는 약 300-500억원에 달하므로 간단한 산술적 계산으로는 모델당 100만대를 생산하여야만 투자의 가치가 있는 것으로 보여진다. 물론 위에서 언급한 바와 같은 여러 가지 요인에 의하면 이 숫자보다 훨씬 적은 생산량으로도 경쟁성이 확보될 것으로 예상된다. 이제 한국의 자동차 생산량도 연간 백만 대를 상회하는 수준이며 앞으로도 급격한 양과 질적인 팽창이 기대되고 있는 시점에 자동차 메이커들은 각사 모두 독자적인 고유 엔진 개발을 착수하였으며 일부 회사는 이미 성공을 거두어 양산 준비를 하고 있는 것으로 알고 있다. 그러나 아직도 엔진의 설계부터 양산까지 걸리는 기간이 타 선진 메이커에 비하면 상당히 길며 이로 인해 신제품의 경쟁력 저하가 우려되고 있는 상태이다. 이러한 문제점 해결에 도움을 주기 위해서 학계는 기업체의 기술 개발방향과 전략을 이해하는 것이 필요하다.grightarrow$cn-semistratifiable over$\longrightarrow$semistratifiable over $\alpha$ 2, 어떤 공간이 cn-Semistratifiable over $\alpha$이기 위한 필요충분 조건은 그것이 linearly cushioned cn-pairnet를 갖는 것이다. 3. cn-semistratifiable over $\alpha$의 부분공간 역시 cn-semistratifiabie over $\alpha$ 하다. 4. on-semistratifiable over $\alpha$의 유한개의 적공간 역시 cn-semistratifiabie over $\alpha$한다. 5. 폐 cn-semistratifiable over $\alpha$ 부분공간들의 합공간 역시 on-semistrbtifiable over $\alpha$ 하다. 6. 폐연속 net-cevering 함수에 의하여 cn-semistratifiable over $\alpha$ 성질이 보존된다. 보잘것이 없었고, 현재에도 각 시도별 또는 대학주관의 경시대회가 있으나 거국적인 호응을 받지 못했다. 물론 국제 대회에 참석시키는 것은 엄두도 내지 않았다.로 나타났다. 4. 코코넛과 소나무수피의 경우 암모니아 가스에 대한 흡착 능력은 거의 비슷한 것으로 사료되며, 코코넛의 경우 전량을 수입에 의존하고 있다는 점에서 국내 조달이 용이하며, 구입 비용도 적게 소요되는 소나무수피를 사용하는 것이 경제적이라고 사료된다. 5. 마지막으로 악취제거 미생물균주를 접종한 소나무수피 50%와 펄라이트 30%의 혼합재료를 24시간 동안 장기간 운전 실험을 수행한 결과 암모니아 99.06%, 황화수소 96.61%의 제거

• Korean Chemical Engineering Research
• /
• v.56 no.2
• /
• pp.281-290
• /
• 2018

As the internal combustion engine vehicles of high fuel efficiency and low emission are demanded, it becomes important to procure technologies for improving low-temperature performance of automotive catalyst systems. In this study, we showed that the combustion rate of diesel particulate matter is greatly enhanced at low temperature by applying fuel-borne catalyst and perovskite catalyst concurrently. It was tried to examine the correlation between elemental composition of perovskite catalyst and combustion activity of mixed catalyst system. To achieve this goal, we applied temperature-programmed oxidation technique in testing the combustion behavior of perovskite-mixed particulate matter bed which contained the element of fuel-borne catalyst or not. We tried to explain the synergetic action of two catalyst components by comparing the trends of concentrations of carbon dioxide and nitrogen oxide in temperature-programmed oxidation results.

• Journal of the Korean Institute of Gas
• /
• v.19 no.6
• /
• pp.15-21
• /
• 2015

Natural gas fuel has known to be very promising in terms of abundancy and economic value. Therefore it is widely treated as research topics in a variety field of production, storage and utilization. Natural gas has become one of the major sources for the power generation by using internal combustion engines(ICE). Development of natural gas fuel injection device should be preceded to realize a reliable natural gas fuel supply system for a MW class power generation reciprocating ICE. In this research, an injection valve which consists of solenoid and body part with a moving plate was designed and its dynamic performance was experimented in the engine-like environment. As a result of the experiments, linearity of flow rate was obtained and overall around 2ms of response time was observed at the pressure difference of 1bar. In addition, more than 100Liter/min(@2Hz) of gas flow rate was witnessed, which is expected to be adequate for the fuel supply system of a MW class natural gas engine.

• Review of Culture and Economy
• /
• v.17 no.2
• /
• pp.81-102
• /
• 2014

As carbon dioxide, the main greenhouse gas, is generally emitted by vehicles, the development and distribution of electric cars is important for the sustainability of environmentally-friendly tourism, especially in national parks. National parks in Korea, however, still see the use of traditional vehicles powered by internal combustion engines in the handling of visitors and the transportation of goods and staff. Such engines being the cause of environmental problems such as exhaust emission and noise pollution, the introduction of electric cars in national parks is needed. This study aims to analyze the economic value of electric cars in national parks as well as contribute to the development of the Green Transportation model in tourism destinations. The study used a logit model to estimate the willingness to pay for the introduction of electric cars in national parks. Adults over the age of twenty, with gender and age apportioned equally, were surveyed using questionnaires that included dichotomous as well as demographic questions. The findings show that the amount an individual is willing to pay for the purpose of environmental conservation is 3,948 won, while the value the national parks would derive from the use of electric cars is 56,138,130,000 won. The introduction of electric cars in national parks is expected to offer both direct and indirect benefits while helping to improving the environment of the national parks by eliminating exhaust emission and noise. This introduction would also be a response to climate change that can be taken by society as a whole.

• Korean Journal of Soil Science and Fertilizer
• /
• v.22 no.1
• /
• pp.1-5
• /
• 1989

This study was carried out by using laboratory data to calculate Soil Moisture Control Section (SMCS) for medium textured topo-sequential soils derived from porphyry in Milyang area. The soils studied were characterized by loam to silty clay loam, and the moisture content at -1/3 bar in the solum ranged around 21.06% to 32.42%. The moisture contents per centimeter of soil layer within a solum calculated at field capacity (FC) ranged from 0.11cm to 0.19cm. The upper boundaries of SMCS of the soils calculated on the basis of FC as the water content at -1/3 bar, ranged from 16.2cm to 21.2cm and the lower boundaries from 44.4cm to 63.8cm, and the depth of SMCS were from 27.7cm to 42.6cm in the soil profiles. The Bongsan soil on the summit had shallower in the boundaries and narrower in the depth of SMCS than the soils on side-slopes or on valley.