• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.28-36
• /
• 2018

Islands are supplied with power from diesel generation or from photovoltaic power generation, and problems with offshore environmental impacts (age deterioration, salt pollution), environmental pollution (exhaust gas, noise, dust) and power generation costs (installation, maintenance) have increasingly emerged. In 2016, the cost recovery rate was only 27%, and deficits reached 73% on 65 islands managed by KEPCO. In terms of deficits, the costs incurred in the power generation sector accounted for 91%, with the ratio of fixed costs at about 60%. Analysis suggests that operating costs can be reduced with an optimal power supply system that improves power generation efficiency and makes operating systems more efficient. Therefore, it is possible to simplify fuel transportation and facility maintenance, because one island integrates the power plants of remote islands, and offshore cable is used to supply power to the other islands. From the economic evaluations in this paper, an algorithm deciding offshore cable layout validity for an integrated power supply between adjacent islands is presented. Simulation results based on the proposed algorithm confirmed that an integrated power supply is economical for existing stand-alone operations on islands having diesel generation, low peak power, and near distances.

• Journal of Energy Engineering
• /
• v.24 no.2
• /
• pp.129-143
• /
• 2015

Increasing concerns on climate change and energy security accelerated policies to reduce green-house gas emission, especially from the transportation sector. Electric vehicle (EV) has been on the spotlight to deal with such environmental issue and V2G (Vehicle-to-Grid) technology began to draw attentions as an alternative to reduce ownership costs while contributing to an efficient and decentralized power grid. This study conducts a scenario analysis on total cost of ownership of EV under V2G scheme and compare with non-V2G EV and Internal Combustion Engine (ICE) vehicle. As result, V2G service is expected to provide an annual average profit of $210 to EV users willing to reverse flow its residual power in the battery. The profit from V2G service leaves a margin of $4,530 over operational lifetime, compared with $2,420 cost of charge for non-V2G EV. In summary, total cost of ownership of V2G-capable EV was 6.2% less than non-V2G EV and 10.2% higher than ICE vehicle. The results confirm a comparative economic advantage of operating EV under V2G scheme. Increased number of EVs with V2G service has shown to provide positive effects to power industry for valley filling in load distribution, thus, favorably increasing the overall economic feasibility.

• Fire Science and Engineering
• /
• v.30 no.5
• /
• pp.1-8
• /
• 2016

Safety management in hazardous areas with potentially explosive gas atmospheres (here in after referred to as hazardous areas) in large scale facilities dealing with combustible or flammable materials at home and abroad is very important (significant) for the coexistence of the company and local society based on business continuity management (BCM) and reliance. For the safety management in hazardous areas, two systems are mainly used: (1) the control system for the prevention of combustible or flammable substances and (2) the explosion proof system for the elimination of ignition sources when flammable gases are leaked to inhibit the transition to fire or explosion accidents. While technology and regulations on explosion proof facilities or devices for electrical ignition sources are well developed and defined, those for thermal ignition sources need to be more developed and established. In this study, the internal combustion engine in hazardous areas was investigated to determine the risk of ignition. For this purpose, document searches were conducted on the relevant international standards and accidents cases and risk analysis reports. In addition, this study assessed the application cases of the diesel engine's safety equipment, such as spark arresters regarding the site of process safety management (PSM) system in central Korea. To practically apply these results to the hydrocarbon industry, the safety management method for explosion prevention in hazardous areas was provided by risk identification for ignition sources of internal combustion engines, such as diesel engines.

• Elastomers and Composites
• /
• v.38 no.1
• /
• pp.57-64
• /
• 2003

Metal oxide(MgO) was added to FKM rubber in order to develop automotive fuel hose which ran show elastic characteristics under extreme condition. Cure characteristics, physical properties, thermal resistance and fuel resistance of FKM compounded rubber with MgO were investigated. MgO was mixed to FKM rubber materials within the range of $0{\sim}20phr$. From the test results of rheological properties and Mooney viscosity, the $t_{s2}$, $T_{c90}$ values increased as the MgO contents increased in FKM rubber compounding. Hardness and 100% modulus of FKM compounded rubber slightly increased, but tensile strength and elongations at break slightly decreased. From the test results of thermal resistance of rubber specimens at 130, 150, and $170^{\circ}C$ for 70 hrs, the changing rate of physical properties was found to be relatively small. Fuel resistance tests were carried out for fuel A, B, C and D at $40^{\circ}C$ for 70hrs, and the results showed that the changing rate in physical properties was found to increase from Fuel A to D, Furthermore thermal properties of FKM compounded rubber containing MgO were also investigated by using TGA/DSC. The optimum mixing ratio of additive to FKM rubber to get the maximum effect on thermal resistance and fuel resistance, within the range of desirable specification for rubber material, was determined to be 6 phr for MgO.

• Journal of Korean Society of Forest Science
• /
• v.111 no.4
• /
• pp.538-547
• /
• 2022

In this study, the population and community structure of Berchemia berchemiaefolia stands located at Mt. Naeyon (Gyeongbuk, Korea) were quantified, and multivariate analysis was done to determine the correlations between vegetation group types and environmental factors and to have reference data for the conservation and restoration of this species. In total, there were 164 B. berchemiaefolia trees in Mt. Naeyon. The average DBH of the trees was 24.5 cm, forming a normal distribution. It rarely appeared in an understory vegetation height of 3 m. About37.1% of the trees were branched. B. berchemiaefolia stands were classified into two groups: B. berchemiaefolia-Quercus serrata community and B. berchemiaefolia-Carpinus laxiflora community. Canopy gap, organic matter, exchangeable Ca, and cation exchange capacity were the major site characteristics affecting the distribution pattern of the stands. Currently, B. berchemiaefolia trees dominate in Mt. Naeyon, but depending on different habitat positions, the species was in a natural successional stage to C. laxiflora or C. cordata, which is a shade-tolerant species.

• 방재와보험
• /
• s.122
• /
• pp.36-44
• /
• 2007

BP 텍사스 시티의 석유정제소의 화재폭발은 2005년에 가장 많은 인명의 손실을 끼친 유동화자산의 화재폭발사고로서 15인의 생명을 앗아가고 200여 명의 사람을 다치게 하였다. 트럭 한 대의 역화(내연기관의 부정폭발)에서 시작된 점화원은 이성질체화시스템(ISOM) 대기암 통기구에서의 가연성 탄화수소 액체와 증발 기체를 발화시켰다. 화학안전위원회는 그 사고를 조사 및 검토한 후 BP사가 모든 면에서 기계적인 결함과 함께 안전성이 불완전하였음을 발견하였다. 본 고는 저자들이 미국화학안전위험조사위원회에 제출한 이들의 조사보고서를 번역 게재한 것이다.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1998.05a
• /
• pp.125-130
• /
• 1998

인간의 역사상 거의 모든 기술과 공학적, 역사적 사건중 가장 첫 번째로 꼽는 것이 불의 발견이라고 할 수 있고 생식에서 가공식의 시작이고 에너지의 이용기술의 시작이라고 할 수 있다. 열에너지의 이용기술은 증기터빈, 내연기관, 발전소 등의 응용기술로 많은 발전을 거듭하고 있으나 열에너지와 전기에너지지간의 변환에서는 여러 측면에서 손실을 가지고 있다. (중략)

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2000.11a
• /
• pp.243-246
• /
• 2000

연료전지(Fuel Cell)는 carnot 과정을 거치지 않고 연료의 화학 에너지를 전기 에너지로 직접 전환시키는 고효율의 전기화학적 발전장치이다. 기존의 내연기관은 실제 효율이 20-45%이지만, 연료전지는 40-65%의 효율로 운전할 수 있고 공해물질의 발생도 거의 없는 장점이 있다. 또한 다양한 대체 연료를 사용할 수 있어 석유에너지 절감과 대체 에너지 개발에 기여할 수 있다는 장점이 있다.(중략)

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.33 no.1
• /
• pp.59-67
• /
• 1997

This paper gives a controller design method by Linear Matrix Inequality(LMI) for internal combustion engine with Continuously Variable Transmission(CVT) which satisfies the given $H_\infty$ control performance and robust stability in the presence of physical parameter perturbations. To the end, the validity and applicability of this approach are illustrated by simulation in the all engine operating regions.

• Journal of the korean Society of Automotive Engineers
• /
• v.7 no.4
• /
• pp.9-17
• /
• 1985

엔진이 고성능화가 되어감에 따라 실린더 헤드 가스켓 재료나 밀봉(sealing) 구조가 계속해서 변 천되어 가고 있고 이는 엔진의 성능향상이 헤드 가스켓에 의해 크게 좌우된다는 것을 알려준다. 그러나 종래에는 헤드와 엔진보아(bore) 간의 밀봉문제가 가스켓만의 문제로 해서 검토하는 경우 가 많았다. 거기에다 검토 되어지는 것도 엔진의 개발 최종단계에서 이기 때문에 엔진을 개선할 수 없어 여러 가지 문제점을 가스켓이 부담하는 경우가 많았다. 그에 의한 무리한 대책은 나중 에 여러 가지 문제를 야기하는 결과를 가져다 준다. 그래서 여기서는 실린더 헤드 가스켓에 관 한 전반적인 내용을 서술하고자 한다.