• The Journal of the Acoustical Society of Korea
• /
• v.17 no.6
• /
• pp.54-61
• /
• 1998

중주파수대역은 내부 음향 모드의 공명 및 모드간 상호 간섭 특성을 완전히 무시할 수는 없으나 모드 밀도가 비교적 높기 때문에, 기존의 저주파수용 모드기법이나 고주파수에 대한 통계적 및 기하학적 해석방법과는 다른 기법이 필요한 구간이다. 본 논문에서는 위상 을 포함한 기하음향모델을 이용하여 중주파수 특성을 고려하는 개념을 이용하여 해석기법을 확립하였으며, 삼각형빔법을 기초로 한 모델링을 하였다. 세 개의 서로 다른 특성을 지닌 대 상 공간에 대해 음향 경계요소법 및 실험에 의한 음향 주파수응답함수와 본 연구 결과를 비 교함으로써 유효성과 오차특성을 검토하였다. 이로부터 위상으로 고려한 중주파수 대역에 잘 적용될 수 있음을 확인하였고, Schroeder의 차단주파수 이하의 저주파수에서는 내부구조 에 의한 회절이, 차단주파수의 네 배 이상인 고주파수에서는 벽면에서의 산란이 간섭현상과 함께 고려되어야 함을 보였다. 이러한 해석기법은 중주파수대역에 있어서 청감특성을 고려 한 내부공간의 음향설계에 매우 유용할 것으로 사료된다.

• 한국해양학회지
• /
• v.26 no.2
• /
• pp.133-143
• /
• 1991

A new internal tide model for solving flow fields and wave generations is presented here which seems to be simple to apply, converges fast and yields accurate results. The new method employs a representation of vertical structure using dynamic basis functions which depend on the stratifications. The present method has been applied to the East Sea. For a constant Brunt-Vaisala case, weak baroclinic currents are generated over the entire continertal slop: however, results using a more realistic stratification can be described using only the lowest modes and exhibit much more realistic behavior. Baroclinic tide generation is confined to the upper slope. Model results for the East sea show the semi-diurnal baroclinic modes contain almost all the energy transferred from the barotropic mode.

• Convergence Security Journal
• /
• v.8 no.4
• /
• pp.153-159
• /
• 2008

Graded-Index Multimode Optical fibers have recently received a lot of attention as regards their application and lightwave behavior in relation to broadband communication links. Accordingly, this aticle presents a novel lightwave mode analysis that solves the wave equation using a numerical analysis based on an eigenvalue problem method, thereby avoiding the typical complicated Bessel function method. Angular depedences and number of modes were observed as well. Future research implications will be possibly noticed such areas as bending effects and mode coupling analyses thru this research.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.1
• /
• pp.108-113
• /
• 2014

This paper presents the influence on the transmission characteristics of swelling in rectangular waveguides for Q-band. We derived the Green's functions of the waveguide with eigenfunction expansion method. The reflection coefficient of the waveguide with a swelling is calculated by using internal impedance in order to investigate the influence of swelling in the waveguide. In order to check the validity of the theoretical analysis, the calculated reflection coefficients are compared with the measured results.

• Journal of Korean Association for Spatial Structures
• /
• v.7 no.4
• /
• pp.89-96
• /
• 2007

The fundamental frequency maximization of beam structures is carried out by using strain energy based topology optimization technique. It mainly uses the modal strain energy distributions induced by the mode shapes of the structures. The modal strain energy to be minimized is employed as the objective function and the initial volume of structures is adopted as the constraint function. The resizing algorithm devised from the optimality criteria method is used to update the hole size of the cell existing in each finite element. The beams with three different boundary conditions are used to investigate the optimum topologies against natural mode shapes. From numerical test, it is found to be that the optimum topologies of the beams produced by the adopted technique have hugh increases in some values of natural frequencies and especially the technique is very effective to maximize the fundamental frequency of the structures.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.7
• /
• pp.722-729
• /
• 2013

This paper presents the influence on the transmission characteristics of dimensional tolerances of rectangular waveguides usually used as a low-loss transmission line in the millimeter-wave band. We derived the Green's functions of the waveguide with eigenfunction expansion method. The reflection coefficient of the waveguide with a post is calculated by using internal impedance in order to investigate the influence of dimensional tolerances of the waveguide. In order to check the validity of the theoretical analysis, the calculated reflection coefficients are compared with the measured results.

• The Journal of the Acoustical Society of Korea
• /
• v.41 no.2
• /
• pp.174-183
• /
• 2022

Acoustic radiation from a submerged elastic shell with an internal fluid surrounded by the bubble layer is studied with the modal theory. An omni-directional point source located on the center of the internal fluid is used as acoustic noise source. The unknown coefficients of modal solutions are solved using the interface conditions between media. To preserve the stability of the modal solution over wide frequency ranges, the scaled technique of modal solution is used. The bubble layer is modeled with four kinds of bubble distribution; uni-modal distribution, uniform distribution, normal distribution, and power-law distribution, based on the effective medium theory of Commander and Prosperetti. For each bubble distribution, the insertion losses are mainly calculated for the frequency. In addition, the numerical simulations are performed depending in the bubble void fraction, the material property of elastic shell, and the gap between the bubble layer and the elastic shell.

• Journal of Korean Society of Environmental Engineers
• /
• v.36 no.7
• /
• pp.476-482
• /
• 2014

In this study, the characteristics of emulsified fuel and engine emissions were studied with engine dynamometer. Microexplosion took place in the combustion chamber. While combustion, emulsion fuel scattered to micro particles and it caused to smoke reduction. The heat produced from water vapour reduce the temperature of internal combustion chamber and it caused to inhibition of NOx production. It can be verified by the lower exhaust temperature of each ND-13 mode using emulsion fuel than that of MDO fuel. The NOx and smoke concentration were reduced by increasing water content in emulsion fuel. The power also decreased according to the increment of water content of emulsion fuel because emulsion fuel has low calorific value due to high water content than MDO. As a result of ND-13 mode test with 17% moisture content, it was achieved 24% reduction in NOx production, 76% reduction in smoke density, 11% reduction of $SO_2$ and 13% reduction in power loss.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.25 no.3
• /
• pp.547-557
• /
• 2015

The security of all cryptographic algorithms and protocols is based on the confidentiality of secret keys. Key management mechanism is an indispensable part of the cryptographic system and this deals with the generation, exchange, storage, use, and replacement of keys. Within the key management mechanism there are key derivation functions (KDFs) which derive one or more keys from a master key. NIST specifies three families of PRF-based KDFs in SP 800-108. In this paper, we examine the difference of security models between the KDFs and the encryption modes of operations. Moreover we focus on the provable security of PRF-based KDFs according to input types of counters, and show that the counter and feedback modes of KDFs using XOR of counters are insecure, while these modes using concatenation of counters are secure.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.1
• /
• pp.116-123
• /
• 2003

In this paper, interleaved boost converter is applied as a pre-regulator in switched mode power supply. The pre-regulator plays a role to improve power factor. Interleaved Boost Power Factor Corrector(IBPFC) can reduce input current ripple as a single voltage control loop only without inner current loop, because input current is divided each 50% by two switching devices. Each converter cell is also operated in discontinuous current mode and inductor current of each converter is discontinuous. Total input current which is composed by each converter cell is continuous current. Thus, IBPFC is able to improve input current ripple. IBPFC operating in discontinuous current mode can be classified as six modes from switching state and be carried out state space averaging small signal modeling. A control transfer function is obtained according to the modeling. Single voltage control loop is also constructed by the control transfer function. From experimental result, improvement of power factor and input current ripple are verified.