• Journal of the Microelectronics and Packaging Society
• /
• v.7 no.1
• /
• pp.1-5
• /
• 2000

Co-fired resistors for high frequency MCM-C (Multi Chip Module-Cofired) were fabricated and measured their RF properties from DC to 6 GHz. LTCC (Low Temperature Co-fired Ceramics) substrates with 8 layers were used as the substrates. Resisters and electrodes were printed on the 7th layer and connected to the top layer by via holes. Deviation from DC resistance of the resistors was resulted from the resister pastes, resistor size, and via length. From the experimental results, the suitable equivalent circuit model was adopted with resistor, transmission line, capacitor, and inductor. The characteristic impedance $Z_{o}$ of the transmission line from the equivalent circuit can explain the RF behavior of the buried resistor according to the structural variation.

• Journal of IKEEE
• /
• v.24 no.4
• /
• pp.1129-1135
• /
• 2020

The effects of battery aging limit the rechargeable capacity, State of Health(SoH). It is very important to estimate the SoH in the battery monitoring system(BMS) and many algorithms of measuring the internal resistance of the battery were proposed. A method is used by applying a current source of a specific frequency to the battery and measuring the voltage response. When charging harmonic noise is generated in the voltage response, it results in poor resistance measurement accuracy. In this paper, a robust battery internal resistance measurement algorithm is proposed to eliminate the effect of charging noise by integrating the current source and voltage response signals for a certain period. It showed excellent accuracy and stable measurement results. Applying to the BMS for uninterruptible power supply, the usefulness of the proposed method is verified.

• Composites Research
• /
• v.26 no.3
• /
• pp.201-206
• /
• 2013

The electrical resistance measurement was investigated as a damage monitoring method. In this study, 0.5 wt% Carbon nanotube reinforced polypropylene (CNT/PP) composites were evaluated under compressive fatigue loading. The shape of specimens was $20^{\circ}$ curved round type. Compression strength and electrical resistance were measured at different sections of specimen during compression. The microcracks of CNT/PP composites were detected based on the changing ratio of electrical resistance. Micro-damage during compressive fatigue test could be detected by electrical resistance measurements. The reason is that the contact points of CNTs in composites decreased under fatigue loading. During compressive fatigue test, larger change of electrical resistance was detected at the microcrack sections. It was proved that microcracks could be detected by electrical resistance measurement under compression test, whereas the real delamination parts were consistent with the predicted results by electrical resistance measurement.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.830-833
• /
• 2004

UPS 시스템에서 정전시 안정적인 전력공급을 방해하는 요소의 대부분은 배터리의 불량이 차지하고 있다. 일반적으로 UPS 시스템에 적용되는 배터리는 일정시간이 경과되면 전체를 교체하는 관리시스템을 가지며, 주기적인 방전시험을 실시하지만 교체기준에 대한 명확한 방안이 마련되어 있지 않다. 일부에서는 배터리의 내부저항 혹은 임피던스를 측정하여 배터리의 교체여부를 판단하는 기준으로 삼고 있지만 배터리의 비선형적 특성으로 인하여 그 오차범위는 크다고 할 수 있다. 또한 배터리는 부동충전시에는 정상적인 특성을 보이지만 방전시 불량 특성이 나타나는 경우가 많고, 리튬-이온 배터리의 경우 내부저항은 수십$[m\Omega]$의 비교적 큰 값을 가지지만 UPS에 적용되는 납축전지의 경우 수$[m\Omega]$ 정도의 아주 낮은 내부저항을 가져 측정오차에 의해 불량 여부를 명확히 판단하지 못하는 경우가 있다. 본 논문에서는 이러한 문제점에 착안하여 평상시에는 배터리의 개별셀 전압, 온도, 전체전압 및 보관함의 온도, 충방전 전류, SOC(State of Charge)를 현장 및 원격지의 모니터링 PC로 전송하여 사용자에게 보여주며, 정전으로 인한 방전시에는 내부저항과 개별셀의 용량을 계산하고 이를 통해 교체시기를 결정할 수 있도록 구성되어 있으며, 실험을 통해 타당성을 확인하였다.

• Korean Journal of Environment and Ecology
• /
• v.15 no.1
• /
• pp.17-25
• /
• 2001

본 연구는 조경수목의 목질 내부의 상태 진단과 변색 및 부후 부위의 탐색을 통하여 병든 부위를 조기에 제거. 병의 확산 방지 및 효율적인 예방관리를 위해 Shigometer의 이용가능성을 제시하고자 하였다. 본 연구대상지는 충남 천안시 성환흡 수향리에 위치한 연암축산원예대학으로 하였으며, 대학 구내에 식재된 조경수를 대상수종으로 하였다. 대상수종은 침엽수 7종과 활엽수 16종으로 총 23종을 선정하였다. 조사한 조경수목의 내부 전기저항치는 수종별로 매우 다양하게 나타났다. 평균 내부 전기저항치가 500k$\Omega$이상인 수종은 은행나무, 섬잣나무, 소나무, 단풍나무, 중국단풍. 홍단풍이었으며, 개체간 차이와 측정 깊이에 따른 차이도 심하지 않았다. 그러나 메타세쿼이아, 수양버들, 자귀나무, 회화나무는 200k$\Omega$이하의 낮은 내부 전기저항치를 나타냈다. 측정 깊이에 따른 변화가 심한 수종은 전나무, 메타세쿼이아, 수양버들, 느티나무, 튤립나무, 목련, 일본목련, 핀오크, 벚나무등으로 이들은 측정 깊이에 따라 전기저항치가 갑자기 하락하는 부위를 포함하고 있었으며, 전기저항치가 갑자기 하락하는 부위의 목재는 부후되어 있었다. 결론적으로 Shigometer는 가시적인 피해증상이 나타나기 전 초기단계에서 목재의 변색 및 부후 부위를 찾아내는데 유용하게 이용될 수 있을 것으로 판단된다.

• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2000.04a
• /
• pp.69-72
• /
• 2000

기판과의 동시소성에 의한 고주파 MCM-C(Multi-Chip-Module-Cofired)용 저항을 제작하고 6 GHz 까지의 RF 특성을 측정하였다. 기판은 저온 소성용 기판으로서 총 8층으로 구성하였으며, 7층에 저항체 및 전극을 인쇄하고 Via를 통하여 기판의 최상부까지 연결되도록 하였다 저항체 Pastes, 저항체의 크기, Via의 길이 변화에 따라서 저항의 RF 특성은 고주파일수록 더욱 DC 저항값에서부터 변화되는 양상을 보였다. 내부저항의 등가회로를 구현한 결과, 저항은 전송선로, Capacitance 성분이 혼재되어 있는 것으로 나타났으며 전극의 형태에 따라 Capacitance 성분이 많은 차이를 나타내었다.

• Horticultural Science & Technology
• /
• v.19 no.4
• /
• pp.455-458
• /
• 2001

To screen potato clones with high resistance to hollow heart (HH) and internal brown spot (IBS), field conditions were set up to induce high frequencies of physiological disorders in 'Atlantic' potato through various treatments of mulching, periodic shadings, and plant growth regulators such as trinexapac-ethyl (Tr-E) and dicloprop-triethanol mine (DTA). IBS occurrence was as high as 67.5% in the field plot mulched with transparent film and shaded for 10 days beginning at 80 days after planting. The highest level of HH was 22.9% in the plot mulched with transparent film and shaded for 10 days beginning at 60 days after planting. Very high level of IBS (66.3%) also occurred in the plot treated with 1500 mg/L of Tr-E 40 days after planting, while HH occurred by 21.3% in the plot treated with 1000 mg/L of DTA 70 days after planting. In the plots which were treated with 1,500 mg/L of Tr-E after 40 days of planting and 1000 mg/L of DTA after 70 days of planting, 'Superior' (moderately highly resistant) and 'Atlantic' (very susceptible) could be clearly distinguished to be resistant and susceptible. High occurrence condition set up in this study could be applied for the potato breeding program to screen potato clones with high resistance to HH and IBS.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.3
• /
• pp.322-329
• /
• 2021

Nano-cementitious composites may have defects due to poor dispersion of nanomaterials and fabrication process. These defects can cause critical problems for nano-cementitious composites, but studies related to non-destructive analysis of defects sizes inside nano-cementitious composites are insufficient. This study aims to perform non-destructive analysis of nano-cementitious composites by utilizing ultrasonic and electrical resistance. Various sizes of defects were implemented inside the specimens and the specimens were subjected to ultrasonic non-destructive analysis and electrical resistance non-destructive analysis depending on the size of defects and curing days. As a result of the experiment, ultrasonic pulse velocity decreased by up to 11% as the defects size increased, and the electrical resistance increased by up to 14% depending on the defects size. For this reason, this study concluded that non-destructive analysis using ultrasonic and electrical resistance can predict defects inside nano-cementitious composites.

• Journal of IKEEE
• /
• v.28 no.1
• /
• pp.14-19
• /
• 2024

To determine the performance of recycled cells for application to residential BESS, cells used over the past 5 years were selected. The basic specifications of the cell used in the test are nominal voltage of 3.7[V], nominal capacity of 2,200[mAh], charging voltage of 4.05[V], continuous discharge current of 1[C](2,200[mA]), continuous charging current of 0.5[C](1,100[mA]). For new cells, the internal resistance was 21.3±1[mΩ], but for recycled cells, the average internal resistance was 25.38[mΩ], an increase of about 19.1[%]. The charge·discharge capacity was approximately 18.9~19.3[%] lower than that of a new cell. Because internal resistance and charge·discharge capacity are closely related to cell aging, cells to be applied to BESS need to use products with an initial internal resistance of 1.5 times or less and a charge·discharge capacity performance of 70[%] or more.

• Proceedings of the KIPE Conference
• /
• 2017.07a
• /
• pp.56-57
• /
• 2017

본 논문에서는 배터리의 노화에 따른 내부 저항 및 전압변동(Differential Voltage; DV)곡선 변화를 실시간으로 추정하는 SOH (State of Health) 알고리즘을 개발한다. 개발된 알고리즘은 정확한 내부 저항 추정을 위해 동작 및 측정 환경에 따른 고주파 통과 필터의 최적 설계 방안을 제안하며 동적 전류 특성을 고려한 DV곡선의 온라인 업데이트 로직을 이용한다. 알고리즘의 정확도는 단전지 시험 결과를 기반으로 시뮬레이션을 통해 검증한다.