• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2006.06a
• /
• pp.325-326
• /
• 2006

현 화학플랜트에서 사용되고 있는 ABS 수지 응집 공정의 경우 교반기 내부의 불균일한 유동분포와 유동메커니즘의 문제점은 공정 제품의 생산성을 저하 시키는 원인으로 작용하고 있다. 그러나 우수한 성능의 산업용 교반기를 설계하기 위해선 반드시 교반성능에 영향을 미치는 다양한 내부의 유동특성의 정량적인 실험 데이터 확보가 필요하나, 3차원적 비정상 특성을 나타내는 복잡한 구조의 내부 유동특성에 관한 정량적 해석은 현재까지도 상당한 어려운 문제로 남아있다. 이에 이런 문제점을 개선하여 생산성을 향상시키기 위해서는 PIV 기법을 이용한 교반기 내부의 유동분포와 유동메커니즘을 규명하여 교반기 내부의 최적화된 유동을 형성시키는 임펠러의 형상을 개발하고자 한다.

• Journal of the korean Society of Automotive Engineers
• /
• v.9 no.1
• /
• pp.9-14
• /
• 1987

왕복동 내연 기관 실린더 내의 가스 유동은 기관의 성능 향상, 연소 개선, 배기 정화 등에 직접적 으로 영향을 미치는 인자로 되며, 최근 각종 유동의 측정 방법 및 측정 장치의 개발은 가스 유동 계측에 많은 발전을 가져 왔다. 특히 각종 열기관의 연소 성능 향상을 위한 노력은 기관의 성능 향상과 더불어 여소 배출물의 유해 성분 저감을 위한 연구에 더욱 박차를 가하게 되었다. 이에 따라서 기관의 최적 제어 운전, 자동 제어 연료 공급 및 분사장치 등에 이르기까지 많은 노력이 경주되어 왔다. 이러한 연구 개발에 못지 않게 중요한 것은 실린더 내의 연소 성능을 향상시키 는 것이며 이를 위해서는 먼저 기관 실린더 내부의 가스 유동을 밝히고, 유동의 모델링, 유동장의 계측, 연소장의 유동 측정 등의 연구가 매우 중요한 것으로 생각된다. 실린더 내의 연소 및 유 동장의 연구는 주로 연소 특성치를 관한 연구와 유동장을 중심으로 하는 흐름의 시뮬레이션을 비롯 유동장의 계측으로 크게 나눌 수 있다. 여기서는 주로 실린더 내의 가스 유동의 측정 방 법과 최근의 연구 동향에 대하여 몇 가지 측정의 보기를 중심으로 다루기로 한다.

• Aerospace Engineering and Technology
• /
• v.7 no.2
• /
• pp.46-52
• /
• 2008

The instrumentation was studied in order to measure aerodynamic performance and efficiency of a compressor as a component of a 5MW-class gas turbine for power generation. In case of an axial compressor, the distributions of static pressure on a casing can be obtained by averaging at each stage and those of total pressure and temperature in the flow field of the compressor can be measured with a Kiel temperature probe. In case of a centrifugal compressor, the static pressures at the hub and the tip, respectively, of an impeller exit are considerably different, so the pressures need to be measured at both positions and thereafter averaged. The distributions of static pressures in a diffuser and a deswirler are measured at ten positions along five streamlines in one pitch. In addition the flow field can be measured in detail by 5-hole Pitot tube in order to analyze the flow characteristics of the core flow region and wake region and the rotor-stator interaction of the compressor.

• Solar Energy
• /
• v.17 no.3
• /
• pp.35-41
• /
• 1997

An experimental study was carried out in a vertical channel with square heat source by visualization equipment with laser apparatus. The image processing system consists of one commercial image board slit into a personal computer and 2-dimensional sheet light by Argon-Ion Laser with cylindrical lens and flow picture recording system. Instant simultaneous velocity vectors at whole field were measured by 2-D PIV system which adopted two-frame grey-level cross correlation algorithm. Heat source was uniform heat flux(5W). The obtained results show various flow patterns such as the kinetic energy distribution and the turbulent kinetic energy distribution.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.12 no.4 s.27
• /
• pp.261-266
• /
• 2006

In this study, a scaled model chamber was built to investigate ventilation characteristics of the hood room in LNG carrier. Experimental study was performed in model by visualization equipment with laser apparatus. Four different kinds of measuring area were selected as experimental condition Instant simultaneous velocity vectors at whole field were measured by 2-D PIV system and its software adopting two-frame grey-level cross correlation algorithm. The flow pattern reveals the large scale counter-clockwise forced-vortex rotation at center area.

• Journal of the Society of Naval Architects of Korea
• /
• v.37 no.1
• /
• pp.91-98
• /
• 2000

The present paper is Part 2 of three-part paper for an experimental study on breaking waves generated by a submerged cylinder. Measurements of velocity and head loss profiles at the wakes of cylinder and breaker as well as the turbulent intensities in breaking region were made to elucidate the viscous aspects of breaking waves. Their mutual correlation is also investigated. It is found that the head loss profile is an excellent indicator of the strength and extent of breaker. Very high turbulent intensities measured at and just downstream of the breaker indicate the consequence of energy transfer of wave breaking into turbulence.

• 순환기질환의공학회:학술대회논문집
• /
• 2006.10a
• /
• pp.19-20
• /
• 2006

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.29 no.7 s.238
• /
• pp.773-783
• /
• 2005

Internal flow measurement of very low specific-speed semi-open impellers has been carried out by PIV in order to understand better the internal flow patterns that are responsible fur the unique performance of these centrifugal pumps operating in the range of very low specific speed. Two types of impellers, one equipped with six radial blades (Impeller A) and the other with four conventional backward-swept blades (Impeller B), are tested in a centrifugal pump operating at a non-dimensional specific-speed of $n_s=0.24$. Complex flow patterns captured by PIV are discussed in conjunction with the overall pump performance measured separately. It is revealed that Impeller A achieves higher effective head than Impeller B even though the flow patterns in Impeller A are more complex, exhibiting secondary flows and reverse flows in the impeller passage. It is shown that both the localized strong outward flow at the pressure side of each blade outlet and the strong outward through-flow along the suction side of each blade are responsible for the better head performance of Impeller A.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2009.10a
• /
• pp.245-246
• /
• 2009

횡요동을 하는 13.5도의 모서리 경사각을 갖는 사각탱크 내에서 발생하는 유체의 슬로싱에 대해 비정상 현상 규명이 가능한 PIV기법을 적용하여 실험적으로 고찰하였다. 내부 액체의 유통현상을 계측한 결과, 0.6Hz와 l.2Hz의 주기를 갖는 실제 운동 상황을 모사한 운동 중의 속도분포를 계측 할 수 있는 기술을 확보하였으며 바닥중앙에 설치된 배플 주위 유동장을 해석하였다.

• Proceedings of the KSME Conference
• /
• 2001.06e
• /
• pp.733-737
• /
• 2001

Heat generated from the electronic parts in PDP is undesirable physical properties. To attain optimal arrangement of the electronic parts in PDP, thermal flows in PDP should be analyzed. PIV measurement has been made to quantify the characteristics of the inner flows and outer flows of an actual PDP. The quantity of heat flux from PDP has been estimated using the PIV results. Measurement system consists of Ar-ion laser, CCD camera and an image grabber installed on a host computer.