• Fire Science and Engineering
• /
• v.21 no.1 s.65
• /
• pp.69-73
• /
• 2007

In this research, an environmental-friendly foam extinguisher was newly developed using a natural surfactant as its composition. Two criteria were applied to verify its extinguishing performance and environmental attraction. One is unit 2 model by "Standards of Model Approval and Inspection Technology for Portable Fire Extinguishers" presented in Korea Fire Equipment Inspection Corporation. The other is Terrestrial Plants, Growth Test and Fish, Acute Toxicity Test presented in Korea Institute of Toxicology(Korea Research Institute of Chemical Technology). Test results showed that the extinguishing performance was 5 unit of general fire Class A, the $LC_{50}$ by germination was 75(g/kg) and the $EC_{50}$ by growth was 62(g/kg) through Terrestrial Plants, Growth Test, and also the toxicity was 6658 ppm in Fish, Acute Toxicity Test. The numerical values were highly evaluated than other fire extinguishing agents being commercialized in domestic. The results also showed suitably in basic physical properties and anti-corrosion properties for making use of fire extinguishing agent.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2003.11a
• /
• pp.373-378
• /
• 2003

As a part of assessment of the structural material for the molten salt handling system, corrosion behavior of austenitic alloys, Fe-base and Ni-base in the molten salt of $LiCl-Li_2O_2$ was investigated in the range of temperature; 650~$725^{\circ}C$, time; 24- 168h, $Li_2O$; 3wt%, mixed gas; Ar-10%$O_2$. In the molten salt of $LiCl-Li_2O_2$, Ni-base alloys showed higher corrosion resistance than Fe-base alloys. Fe-base alloy with low Fe and high Ni contents exhibited better corrosion resistance. The scales of $Cr_2O_3$, $FeCr_2O_4$ on Fe-base alloys were showed, and $Cr_2O_3$, $NiFe_2O_4$ on Ni-base alloys were also showed.

• Journal of Energy Engineering
• /
• v.15 no.2 s.46
• /
• pp.107-117
• /
• 2006

The status of water splitting thermochemical cycle for hydrogen production was reviewed in this article. Mass production of hydrogen could be possible using the thermochemical process which is similar to the concept of conventional chemical reaction system if the high temperature heat source is available. The mediators (chemicals and reagents) should be used to split chemically stable water, and should be recycled in a closed cycle in order to be environmentally acceptable. Though there is no process to reach commercial stage, IS cycle, two-step cycles based on metallic oxide such as ZnO/Zn, $Fe_3O_4/FeO$ and the associated cycles are attracted due to their possibilities of application. Development of materials for high temperature and/or corrosive conditions during thermochemical process is still important topic in some thermochemical processes.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.5
• /
• pp.78-87
• /
• 2012

This study is for developing a system for electro-deposition utilizing sea water containing various ions like calcium and magnesium. This is the first step research for the final goal which is a development of anti-corrosive steel for RC structure, so that this paper is mainly focused on the development for electro-deposition system. Optimum conditions for steel coating is obtained through various tests considering anode type, temperature, duration time, and current density. The composition of electro-deposition is analyzed through SEM, EDS, and XRD and it is evaluated to be $CaCO_3$ and $Mg(OH)_2$. Through measuring polarization potential and current density in the coated steel, the coating layer from the developed system is evaluated to have high resistance to steel corrosion. Additional tests and discussions on durability and structural performance in the coated steel from this work will be performed for the second step research.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.136-136
• /
• 2018

듀얼 페이즈(DP) 강철과 같은 고강도강(HSS), TRIP강, TWIP강은 무게를 줄이고 자동차의 안전을 향상시키기 위해서 자동차 산업에서 광범위하게 쓰이고 있다. HSS강의 내부식성을 향상시키기 위해서, 향상된 박막 재료와 기존의 아연도금 공정을 대체하는 공정 방법이 필요하다. Zn-Mg 박막은 강의 부식 방지에 대한 강력한 후보이며, 물리적 기상 증착 공정(PVD)은 강의 Zn-Mg 박막의 증착을 위한 유망한 공정이다. 그러나 이전 연구에서 보고 된 바와 같이 Zn-Mg 박막은 Zn-Mg 박막의 높은 취성으로 인하여 Zn 박막에 비하여 접착력이 매우 불충분하였다. 따라서 본 연구에서는 Zn-Mg 박막의 첩착력을 향상시키기 위해 TRIP강 기판 위에 증발 증착법을 활용하여 Zn-Mg/Zn 이중층 박막을 합성하고 진공에서 열처리를 실시하여 박막의 깊이에 따른 Mg의 함량 변화를 유도하였다. Zn-Mg/Zn 박막 합성 시 EMH-PVD를 활용하여 증착하였으며, Zn 중간층을 모재와 Zn-Mg 층 사이에 증착하고 진공중에서 열처리를 실시하여 박막 내에서 Mg 함량의 기울기 변화가 박막의 밀착력에 주는 영향을 평가하였다. 증착된 박막은 FE-SEM을 통하여 미세조직과 박막의 두께를 분석하였고 line-EDS를 통하여 깊이에 따른 Zn와 Mg의 변화를 분석하였으며 XRD를 사용하여 합금상을 분석하였다. Lap shear test를 활용하여 박막의 밀착력을 정략적으로 분석하였다. FE-SEM 및 EDS 분석 결과 Zn-Mg/Zn 박막을 진공에서 열처리를 실시한 후 FE-SEM으로 분석한 결과 미세조직의 큰 차이는 보이지 않았으나, line-EDS 결과 Mg이 확산되는 것을 확인 할 수 있었다. XRD 분석 결과 확산한 Mg에 의해서 Zn상은 감소하고 $Mg_2Zn_{11}$, $MgZn_2$와 같은 합금상은 증가하는 것을 확인하였다. Lap shear test 결과 $200^{\circ}C$에서 열처리한 Zn-15wt.%Mg/Zn 박막의 경우 밀착력이 19 MPa로 열처리를 하지 않았을 경우(11 MPa)보다 향상되는 것을 확인하였다. 이러한 결과는 통하여 Zn-Mg 박막의 두께의 Mg의 함량 변화에 의해서 박막의 밀착력이 변화되는 것을 알 수 있다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.4
• /
• pp.365-373
• /
• 2008

Fiber Reinforced Polymer, FRP has a light weight, a high tensile strength based on design, non-electronic, non-magnetic, and rust-resistant feature, etc and many researches are being conducted recently on FRP in the construction area. Among them, GFRP (Glass Fiber Reinforced Polymer) is excellent in price competitiveness and is widely being used. However, since GFRP has a relative low modulus of elasticity and causes excessive deflection, the section must be large to be used as a structural component and an investigative review must be carried out in design to set the limit for deflection by the use load. Therefore, in order to solve the mentioned technical problems, this study suggested a section of a module form such that application of a large-scale section is possible. Also, to secure the low rigidity of FRP, this study developed a new FRP+ concrete composite girder form that confined the concrete. To identify the structural movement of the developed FRP+ concrete composite girder, shear strength test was carried out.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.384-384
• /
• 2013

본 연구에서는 e-beam 증착을 이용하여 Al, Mg 단일 금속으로 다층형 Al-Mg 코팅층을 제조하여 특성 분석 및 내식성을 평가하였다. Al-Mg 코팅층은 99.99%의 Al, 99.9%의 Mg grain을 사용하여 E-Beam 가열을 통해 냉연강판 위에 코팅하였다. 증발물질과 기판과의 거리는 48 cm이며, 기판은 세척을 실시한 후 진공 챔버에 장착하고 ~10-5 Torr 까지 진공배기를 실시하였다. 진공챔버가 기본 압력까지 배기되면 아르곤 가스를 주입하고 기판홀더에 800 V의 직류 전압을 인가하여 약 30분간 글로우 방전 청정을 실시하였다. 기판의 청정이 끝나면 아르곤 가스를 차단하고 코팅층의 구성형태에 따라 Al 또는 Mg을 코팅하였다. 다층형 Al-Mg 코팅층은 2층에서 최대 6층까지 제조하였으며 $3{\mu}m$의 두께를 기준으로 Al과 Mg 코팅층의 두께비가 각각 1:1 과 2:1이 되도록 코팅하였다. 6층 이상에서는 코팅층의 두께 제어가 쉽지 않기 때문에 층수는 6층으로 제한하였다.다층형 Al-Mg 코팅층을 주사전자현미경으로 관찰한 결과, Al-Mg 코팅층간의 계면을 관찰할 수 있었다. 또한 글로우방전분광기로 Al-Mg 코팅층을 관찰한 결과, Al과 Mg 코팅층이 균일한 다층 구조를 형성하고 있는 것을 확인할 수 있었다. 다층의 Al-Mg가 코팅된 강판을 염수분무시험을 통해서 내부식 특성을 확인하였다. Al-Mg 코팅 강판의 염수분무시험 결과, Al-Mg 코팅층의 층수가 증가할 수록 내부식 특성이 향상되는 것을 확인할 수 있었으며, 이러한 현상은 Al-Mg 코팅층이 다층으로 형성되어 있어 부식 생성물을 효과적으로 차단하여 강판의 부식을 방지한 것으로 판단된다.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.3
• /
• pp.99-108
• /
• 2012

In this paper, to intend anticorrosive effect and weight reduction of conventional reinforced concrete slab, lightweight concrete slab reinforced with glass fiber reinforced polymer(GFRP) bar was considered and some basic behaviour of the slab were investigated. Measurement of splitting tensile strength and fracture energy of the concrete, a number of flexural experiment of the slab, numerical analysis using nonlinear finite element analysis, and comparison of the experimental results to the numerical analysis, were conducted. As a result, even the weight of the lightweight concrete slab could be reduced by about 28% than the normal concrete slab, failure load of the lightweight concrete slab was 36% smaller than the normal concrete slab. Such a thing can be attributed to the lower axial stiffness and lower bond strength of GFRP bar. In the numerical analysis, to consider decreasing property of bond strength of the lightweight concrete, interface element was used between the concrete and the GFRP bar elements and this method was shown to be a better way for the numerical analysis to approach the experimental results.

• Composites Research
• /
• v.26 no.2
• /
• pp.105-110
• /
• 2013

In this study, we suggest the new floating PV generation structure which is improved the structural and economical efficiency compared with the system developed in the previous research. Pultruded FRP has superior physical and chemical material properties compared with those of conventional structural materials. Especially, pultruded FRP has an excellent corrosion-resistance, light-weight, and it also has high specific strength and stiffness which are highly appreciated for the design and fabrication of floating PV generation structure under harsh environmental condition. In this study, structural analysis using the finite element method has been performed to investigate the safety of new floating PV generation structure and newly applied structural members.

• Journal of the Korean Electrochemical Society
• /
• v.13 no.2
• /
• pp.123-127
• /
• 2010

An assembled-graphite/DSA(Dimensionally Stable Anode) was prepared using graphite powder to increase durability and energy efficiency of redox flow battery and investigated its electrochemical properties in vanadium-based electrolyte. The cyclic voltammetry (CV) was carried out in the voltage range of -0.7V and 1.6V vs. SCE at 5 mV/sec scan rate to analyze vanadium redox reaction. From the CV results, the assembled-graphite/DSA electrode showed a fast couple reaction and good reversibility in 2M $VOSO_4$ + 2.5 M $H_2SO_4$ electrolyte. Therefore, it has been expected that this electrode increases power density as well as energy density of redox flow battery.