• Korean Journal of Breeding Science
• /
• v.40 no.4
• /
• pp.408-413
• /
• 2008

Rice blast resistance is considered one of the most important traits in rice breeding and the disease, caused by Magnaporthe grisea Barr, has brought significant crop losses annually. Moreover, breakdown of resistance normally occurs in two to five years after cultivar release, thus a more durable resistance is needed for better control of this disease. We developed a new variety, Keumo3, which showed strong resistance to leaf blast. It was tested in 2003 to 2007 at fourteen blast nursery sites covering entire rice-growing regions of South Korea. It showed resistance reactions in 12 regions and moderate in 2 regions without showing susceptible reactions. Durability test by sequential planting method indicated that this variety had better resistance. Results showed that Keumo3 was incompatible against 19 blast isolates with the exception of KI101 by artificial inoculation. To understand the genetic control of blast resistance in rice cultivar Keumo3 and facilitate its utilization, recombinant inbred lines (RIL) consisting of 290 F5 lines derived from Akidagomachi/Keumo3 were analyzed and genotyped with Pizt InDel marker zt56591. The recombination value between the marker allele of zt56591 and bioassay data of blast nursery test was 1.1%. These results indicated that MAS can be applied in selecting breeding populations for blast resistance using zt56591 as DNA marker.

• Korean Journal of Breeding Science
• /
• v.40 no.4
• /
• pp.503-506
• /
• 2008

'Saenuri' is a new japonica rice variety developed and registered by the rice breeding team of Department of Rice and Winter Cereal Crop, NICS, RDA in 2007. This variety was derived from a cross between Gyehwa17 with lodging tolerance and high yield potential, and HR14026-B-68-6-1-5 with resistance to diseases and good eating quality. This variety has about 124 days growth duration from transplanting to harvesting in west-southern coast, Honam and Youngnam plain of Korea. It is about 78 cm in culm length and tolerance to lodging. In reaction to biotic and abiotic stresses, it shows moderately resistance to blast, and resistance to bacterial blight pathogen races from K1 to $K_3$ and stripe virus, but susceptible to other major diseases and insect pests. The milled rice of "Saenuri" exhibits translucent, relatively clear non-glutinous endosperm and midium short grain. It has similar amylose content of 19.0% and lower protein content of 6.1%, and good palatability of cooked rice compared with Nampyeongbyeo. The milled rice yield performance of this variety is about 5.71MT/ha in local adaptability test for three years. "Saenuri" would be adaptable to west-southern coast, Honam and Youngnam plain of Korea.

• Korean Journal of Breeding Science
• /
• v.41 no.4
• /
• pp.520-524
• /
• 2009

A newly developed rice variety "Pungmi 1" is a japonica rice(Oryza sativa L.) with high grain quality and multi-resistant to diseases. It was developed by the rice breeding team of Yeongnam Agricultural Research Institute (YARI), RDA. in 2004. This variety derived from a cross between "YR13616Acp 1", having short culm and multi-resistance to biotic stresses and "Milyang 122" with good grain quality. It has short stature of 73cm in culm length and mid-early flowering date of Aug. 13. This variety is moderately resistant to leaf blast showing durable resistance of lower 10% diseased leaf araea in sequential planting meothod. Milled rice kernel of "Pungmi 1" is translucent, clear in chalkness and good at eating quality in panel test. Milling recovery and head rice ratios were comparable to Milyang 122, while it has low protein content. The milled rice yield potential of "Pungmi 1" is about 5.59 MT/ha at ordinary fertilizer level of local adaptability test. This cultivar would be adaptable to Yeongnam inland plains and southern coastal areas of Yeongnam province at ordinary transplanting as well as after barly cultivation.

• Korean Journal of Breeding Science
• /
• v.40 no.2
• /
• pp.188-191
• /
• 2008

'Hwangkeumnuri' is a japonica rice variety developed and registered by the rice breeding team of Honam Agricultural Research Institute, NICS, RDA in 2006. This variety was derived from a cross between 'Milyang 165' (Junambyeo) with good quality and high yield and HR14732-B-67-2-3 with multi-disease resistance. This variety has about 125 days growth duration from transplanting to harvesting in west-southern coast, Honam and Youngnam plain of Korea. It is about 76 cm in culm length and tolerance to lodging. In reaction to biotic and abiotic stresses, it shows resistance to blast, bacterial blight pathogen from $K_1$ to $K_3$ and stripe virus, but susceptible to other major diseases and insect pests. The milled rice of 'Hwangkeumnuri' exhibits translucent, relatively clear non-glutinous endosperm and midium short grain. It has similar amylose content of 18.9% and lower protein content of 6.2%, and good palatability of cooked rice compared with 'Nampyeongbyeo'. The milled rice yield performance of this variety is about 5.74 MT/ha in local adaptability test for three years. 'Hwangkeumnuri' would be adaptable to west-southern coast, Honam and Yeongnam plain of Korea.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.4
• /
• pp.479-499
• /
• 2019

State assessment of an operational tunnel is usually done by performing visual inspection and durability tests by following the detailed guideline for safety inspection (SI) and/ or precision inspection for safety and diagnosis (PISD). In this study, 12 NATM tunnels, which have been operational for more than 10 years, were inspected to figure out the cause of longitudinal cracks for the purpose of modifying the scoring items in the state assessment NATM tunnel related to the longitudinal crack and the thickness of concrete lining. All investigated tunnels were classified into four groups depending on the shape and usage of each tunnel. The causes of longitudinal crack occurrence were analyzed by investigating the correlations between the longitudinal crack and the following four factors: the patterns of ground excavation; construction state of primary support system; characteristics of material properties of the concrete lining; and thickness of lining which was obtained by Ground Penetration Radar (GPR) tests. It was found that influencing factors causing longitudinal cracks in the lining were closely related with the construction condition of the primary support system, i.e. shotcrete, rockbolt, and steel-rib; crack occurrences were not much affected by the excavation patterns. As for the properties of concrete lining materials, occurrence of the longitudinal crack was mostly affected by the following three items: w/c ratio; contents of cement; and strength of lining. When estimating the lining thickness of the concrete lining by GPR tests and taking thickness effect into account in the statement assessment, it was concluded that increase of the index score by an average of 0.03 (ranging from 0.01 up to 0.071) is needed; a more realistic way of state assessment should be proposed in which the increased index score caused by lack of lining thickness should be taken into account.

• Korean Journal of Occupational Therapy
• /
• v.26 no.4
• /
• pp.73-84
• /
• 2018

Objective : The purpose of this study was to promote R&D of toilet design for the disabled by evaluating the Front-entry sitting toilet applied it to actual wheelchair users to examine the possibility of their application as a toilet that is low physical demanding and high satisfaction. Methods : Forty wheelchair users were asked to demonstrate using Front-entry sitting toilet after collecting the general characteristics and their current wheelchair usage information. Musculoskeletal disease risk assessment and user satisfaction were evaluated throughout Rapid Entire Body Assessment(REBA), Quebec Evaluation of Satisfaction with assistive Technology 2.0(QUEST) and subjective opinion questionnaire. Results : Statistical result showed that REBA scores($3.18{\pm}.38$) of Front-Entry Sitting Toilet were significantly lower(z=-5.930, p<.05) than the conventional toilet($6.53{\pm}1.15$). Overall, user satisfaction ratings were high with detailed scores were high in order of durability($4.48{\pm}.62$), safety($4.38{\pm}.63$), necessity($4.33{\pm}.73$) and universal ($4.6{\pm}.61$). Subjective opinion survey showed most were 'it was convenient to not have to rotate(30.8%).' Conclusion : This study found that Front-entry sitting toilet was highly likely to reduce the risk of musculoskeletal disorders and users' satisfactions were high. Through this study, we hope to expand the scope of occupational therapists and contribute to the physical, mental and social health in the daily activities of the people by applying various approaches.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.2
• /
• pp.194-215
• /
• 2021

Termites are important decomposers in the ecosystem. They are also economically significant structural pests. In this study, we reviewed the developments of termite control and recent research on termite management to provide information on the prevention and control of termites. In Korea, most of the damage to wooden historical buildings is caused by subterranean termites. Reticulitermes speratus kyushuensis is the main species, which is widely found throughout the country. In the early 1900s, inorganic insecticides, such as arsenic dust, were used for termite control. After the synthesis of chlorinated hydrocarbon pesticide in the 1940s, it was widely utilized and demonstrated high termite control efficacy. However, chlorinated hydrocarbon insecticides were later banned, disappearing from markets after reports emerged concerning environmental contamination and toxicity to humans. Therefore, the termite control industry sought a new termiticide; hence many pesticides were utilized for termite control. Organophosphate (1960s), carbamate (1970s), pyrethroid, and insect growth inhibitor (1980s) were newly synthesized and adopted. In the 1990s, the first commercial baits using chitin synthesis inhibitors (CSI) were developed, providing a means to eliminate an entire colony of subterranean termites around a structure. Many studies have been carried out on soil termiticides (liquid termiticides) and CSI baits to increase their efficacy, and different baits such as aboveground bait stations, fluid bait, and high-durability bait were also developed in the 2000s. In addition, the paradigm of termite control has shifted from localized treatments using soil termiticides to area-wide pest management using CSI baits to create termite-free zones and protect buildings over time. Termite infestations in wooden historical buildings in Korea have been reported since 1980, and considerable attention was drawn in the 1990s when several UNESCO world heritages such as the Jongmyo Shrine and the Janggyeong Panjeon Depositories of Haeinsa Temple were infested by subterranean termites. Since then, a survey of termite infestation in wooden architectural heritage has been conducted, and the National Research Institute of Cultural Heritage and Heritage Care Program regularly monitors those properties. Finally, we suggest termite management using primarily CSI baits, selective application of various soil treatments applied to the object, foundation soil treatment, research and development of durable termite baits, application of area-wide programs for wooden-building complexes, application of integrated termite management (ITM), and regular education for owners and managers to prevent and reduce termite damage.

• Geophysics and Geophysical Exploration
• /
• v.25 no.4
• /
• pp.167-176
• /
• 2022

We designed a borehole deviation survey tool applicable for steel-cased holes, K-DEV, and developed a prototype for a depth of 500 m aiming to development of own equipment required to secure deep subsurface characterization technologies. K-DEV is equipped with sensors that provide digital output with verified high performance; moreover, it is also compatible with logging winch systems used in Korea. The K-DEV prototype has a nonmagnetic stainless steel housing with an outer diameter of 48.3 mm, which has been tested in the laboratory for water resistance up to 20 MPa and for durability by running into a 1-km deep borehole. We confirmed the operational stability and data repeatability of the prototype by constantly logging up and down to the depth of 600 m. A high-precision micro-electro-mechanical system (MEMS) gyroscope was used for the K-DEV prototype as the gyro sensor, which is crucial for azimuth determination in cased holes. Additionally, we devised an accurate trajectory survey algorithm by employing Unscented Kalman filtering and data fusion for optimization. The borehole test with K-DEV and a commercial logging tool produced sufficiently similar results. Furthermore, the issue of error accumulation due to drift over time of the MEMS gyro was successfully overcome by compensating with stationary measurements for the same attitude at the wellhead before and after logging, as demonstrated by the nearly identical result to the open hole. We believe that the methodology of K-DEV development and operational stability, as well as the data reliability of the prototype, were confirmed through these test applications.