• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2010.05a
• /
• pp.259-260
• /
• 2010

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2011.06a
• /
• pp.1569-1570
• /
• 2011

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2007.11a
• /
• pp.111-112
• /
• 2007

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.775-783
• /
• 2010

The Yong-san rolling stock depot in which KORAIL does the maintenance of PP was required to move to the other place, so there are some disputes how to treat PP rolling stock, that is, early scraping, extending life-span or introduction of intercity EMU, but introducing a new train are very expensive and also very risky, so executed economical analysis for the precision political decision. For the specific analysis, set some scenario, first uses PP to their life span, second, introduces new intercity EMU, third, extends the life-span of PP by rolling stock precision diagnosis. Largely, maintenance cost, operation cost, rolling stock value are used for the economical analysis. This research is the specific case of KORAIL, but this result can be a valuable data in the perspective of operation cost between diesel rolling stock and electric rolling stock.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.5
• /
• pp.963-970
• /
• 2008

Recently, several papers for reading meters remotely using RFID/USN technologies have been presented. In the case of water meter, there has been neither commercial product nor paper. In this paper, we describe the design and implementation of wireless digital water meter with low power consumption. We use magnetic hole sensors to compute the amount of water consumption. The meter of water consumption is transferred via ZigBee wireless protocol to a gateway. Low power consumption design is essential since a battery should last till the life time of water meter. We present that dual batteries haying 3V, 3000mAh, would last 8 years by analyzing the real power consumption of our water meter.

• Computational Structural Engineering
• /
• v.10 no.3
• /
• pp.74-78
• /
• 1997

각종 구조물의 내구연한 동안에 이루어지는 계획, 설계, 시공, 유지관리 등 여러 단계의 건설실무에서 계산도구의 활용은 필수적이라 할 수 있다. 전자계산 분야에서 지난 40여년 동안에 일어난 주요한 변화를 살펴보고, 미래의 발전 전망에 대하여 알아보고자 하는 본 기고문은 'The Seventh International Conference on Computing in Civil and Building Engineering(ICCBE-VII)'에서 카네기멜론대학의 Steven J. Fenves 교수가 발표한 논문을 번역한 것이다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.11 no.2
• /
• pp.74-85
• /
• 2003

The purpose of this study is to investigate present situation of recovery and treatment of waste home appliances, and to supply basic data for active reuse and recycling of waste home appliances. Among waste home appliances, refrigerator comprise 30.7%, television 37.8%, washing machine 22.9% and air conditioner 0.3%. Local government collected 46.2% of waste home appliances, producer and agent collected 49.7%, recycling center 4.1%. Seventeen percentage of waste home appliances are reused, 65% are recycled, and 18% are landfilled or incinerated. To improve the recycling activity of waste of home appliances, it is important to establish private reuse and recycling organization. It is also necessary to improve waste deposit and refund system for efficient recycling by decent financial support. Extension of a term of usage is another method to minimize waste home appliances. Finally, intensive education for consumer is necessary for waste minimization. Some portion of recycling and treatment cost can be allocated to the local government and large private business can shred and recycle waste home appliances.

• Journal of the Society of Disaster Information
• /
• v.16 no.1
• /
• pp.10-20
• /
• 2020

Purpose: Analyze the results of on-site inspection of the tunnel structure maintenance management monitoring and suggest improvement plans. Method: We investigate and analyze the problems of various items on maintenance monitoring of tunnel structure of 14 subway lines of Seoul subway in downtown area. Result: The maintenance monitoring items, measurement quantity and installation location are classified into open tunnel and excavation tunnel and improvement plans are suggested respectively. Various durability criteria of the measuring instruments were examined, and durability confirmation method suggested improvement measures such as approval, inspection, inspection and testing, calibration of monitoring sensors. Conclusion: Applying the improvement measures of the tunnel structure maintenance monitoring to the construction site will increase the efficiency of the maintenance monitoring and contribute to the development of construction monitoring technology.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.106-106
• /
• 2012

막구조(Membrane structure)란 건축분야에서 "fabric structure" 또는 tension structure"와 같이 사용되는 용어로 코팅된 직물(coated fabrics)을 주재료로 사용하는 구조를 말한다. 특히 구조체로서 연성의 막을 이용 이것에 초기 장력을 주어 강성을 늘림으로서 외부하중에 대하여 안정된 형태를 유지하는 장점을 갖고 있다. 초기 창안된 독일의 온화한 기후에 적용되는 반면 한국이나 일본에는 60m/sec를 넘나드는 태풍의 피해와 많은 적설량을 보이는 기후적 제약으로 발달되지 못하였다. 그러나 최근 새로운 소재의 막구조 제품 개발과 구조해석 방법 및 시공기술 등이 개발되어 보편화되어지고 있는 실정이다. 막구조용 재료로 사용되는 섬유소재는 주로 Polyester직물을 기재로 한 PVC 코팅 제품으로 일반 PVC 막재는 장력이 약하고, 광선에 의한 물성이 쉽게 변화되어 내구연한이 5~15년에 불과하다. 유리섬유나 아라미드섬유 등으로 제직한 기재에 고내열 실리콘이나 PTFE 수지를 코팅한 제품은 약품에 대한 내구성이 높고 자외선에 대해서는 매우 큰 저항성을 가지기 때문에 내구연한이 10년에서 30년 까지도 향상된다. 그러나 실리콘 코팅막은 세계적으로 가장 좋은 막재로 알려졌으나 자정능력(Self Cleaning)에 문제가 발생되어 사용량이 감소 추세라고 할 수 있다. 일반적인 코팅 가공의 경우 MEK, Toluene, DMF 등과 같은 유기용제를 다량 사용함에 따라 작업환경 및 대기오염, 화재 위험 등의 문제점이 있으며 특히 가공시 잔류되는 유기용제의 심각성이 대두되고 있는 상황이다. 이와 같이 코팅 가공제 자체를 친환경적인 물질로 대체하여 각종 환경규제에 대응하고 유해 폐기물의 발생을 줄일 수 있는 코팅 가공제 및 가공기술 개발이 절실하다. 이에 본 연구에서는 Glass-Fiber, Aramid 등의 슈퍼 섬유와 고 강력 섬유 등을 이용하여 PTFE 코팅제품과 비슷한 수준의 성능을 부여하는 무용제형 실리콘 코팅 수지를 개발하고 내구성능 향상, Self Cleaning성, 난연성, 자외선 차단, 인장강도 및 인열 강도의 향상 등 다양한 기능성을 부여하는 최적의 환경 친화적 코팅 공정 기술을 개발하여 차세대 건축용 막구조 제품을 개발하고자 한다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.612-618
• /
• 2020

In recent years, the demand for external window cleaning has increased, but the process is a very dangerous manpower-dependent operation. In addition, it is difficult to clean at the desired frequency in a business that values cleanliness. Therefore, there is a need to automate this work. This paper presents the concept of a device that can be attached to a specific window and clean the window continuously. The economic feasibility of this device was analyzed. The estimated manufacturing cost of the equipment was approximately 10 million won, but the possible investment cost was at least 9.8 million won for five years of endurance and 103 million won for 10 years of endurance. Therefore, the expected savings well exceed the equipment cost, and it was evaluated as having economic feasibility. Since this study analyzed only quantitative indicators, the expected cost reduction due to a reduction in safety accidents, productivity improvement, construction time reduction, and quality improvement was not considered. Therefore, it is expected that the calculated economic feasibility will be more accurate if the cost reduction effect by the automation equipment is calculated by adding the expected values not considered in this study.