• Journal of Korean Society of Steel Construction
• /
• v.25 no.3
• /
• pp.289-297
• /
• 2013

In this study, the local buckling behavior of steel built-up columns, fabricated with grade 800MPa high performance (HSA800), was investigated to verify the suitability of width-to-thickness ratio limits adopted by the current design code. For this purpose, an experimental program was designed and performed for HSA800 steel column specimens with various width-to-thickness ratios. Then the experimental results were compared and verified with finite element analysis results. The parametric analytical studies with various width-to-thickness ratios were also performed to investigate the missing data from the limited experimental studies. From the experimental and analytical studies, It was found that the finite analysis models could reasonably estimate the test results within the 5.3% average differences. The local buckling behaviors of HSA800 steel columns were found to be largely depend on the values of initial imperfection introduced into finite element analyses.

• Microbiology and Biotechnology Letters
• /
• v.36 no.4
• /
• pp.299-306
• /
• 2008

Human pancreatic lipase is a digestive enzyme which is synthesized in pancreas, secreted into small intestine, and there hydrolyze the fat in food. Pancreatic lipase protein composes of catalytic domain and colipase-binding domain. In this research, the gene segments corresponding to total protein, catalytic domain, and co lipase-binding domain were cloned by PCR method, inserted into an expression vector, and then used to transform Escherichia coli BL21 (DE3). The recombinant proteins produced were purified and injected intramuscularly three times into laying hens. The egg yolk antibodies (IgY) were obtained from the egg yolks and tested for their antibody titer. Among three IgY, the IgY against colipase-binding domain showed the highest antibody titer. All three IgY had inhibitory effects on the porcine pancreatic lipase. Among them, the IgY against colipase-binding domain showed the highest inhibition effects. The fat diet with corn oil and IgY was administrated to the experimental rats and their blood compositions were examined with time course. The triglyceride concentration of treated rats was decrease meaningfully when compared with those of control rats. This suggested that the IgY against colipase-binding domain antigen inhibited pancreatic lipase in vivo.

• Journal of Conservation Science
• /
• v.33 no.6
• /
• pp.519-532
• /
• 2017

Studies on ancient ironmaking technologies are primarily based on archaeological surveys and scientific analysis data, and technological systems are examined by comparing the results of restorative experiments. In this study, to examine the ancient iron production technologies such as smelting and smithing in the Jungwon area, a restoration experiment was conducted based on archaeological data, and the iron and slag, etc. produced in the experiment were analyzed. Further, the changes in physicochemical properties due to the smelting of the raw material, specifically, iron ore were determined, and the smithing process, which involves fabrication of ironwares, was analyzed along with the characteristics of each step. In the case of smelting, increasing recovery rates and production of high-quality primary iron material were important for the following processes. For the iron bars produced through the smithing process, it was found that quality improvements made by reducing physical defects such as inclusions or gas holes were more important than the composition of the iron itself. The study also yielded comparative study data for various byproducts, such as smithing slag, which could be utilized in other ironmaking technology studies.

• Korean Journal of Optics and Photonics
• /
• v.15 no.2
• /
• pp.149-157
• /
• 2004

We have calculated the power extraction efficiency and the lasing wavelength distribution of complex-coupled(CC) DFB lasers above threshold for various｜$\chi$L｜ and facet reflectivity combinations, and we have compared the results with those at threshold. Also, we have investigated the effect of coupling coefficient ratio(CR) and the reflectivity of AR facet on the power extraction efficiency and the lasing wavelength distribution. At threshold, the single mode yield as a function of power extraction efficiency of in-phase(IP) CC DFB lasers is the same as that of anti-phase(AP) CC DFB lasers. Above threshold, however, the single mode yield as a function of power extraction efficiency of IP CC DFB lasers is much larger than that of AP CC DFB lasers. For IP CC DFB lasers, AR-HR combination has high single mode yield and large power extraction efficiency compared to other facet combinations. IP CC DFB laser with AR-HR combination for ｜$\chi$L｜of 0.8 has the highest single mode yield and largest power extraction efficiency above threshold among the cases considered. For AR-HR combination, as CR increases and the reflectivity of AR facet decreases, both single mode yield and power extraction efficiency increase due to the reduction of the spatial hole burning effect. For AR-HR combination, the lasing wavelength of CC DFB laser has distributed over the stopband of DFB. As CR increases, the lasing wavelength concentrates on the long wavelength side for IP CC DFB laser, while on the short wavelength side for AP CC DFB laser. As ｜$\chi$L｜ increases, the width of the wavelength distribution decreases and the lasing wavelength moves to the long wavelength side.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.04a
• /
• pp.120-121
• /
• 2003

과수원에서 재배되는 배는 과수원 내의 위치, 시비, 토양 등의 요인에 따라 다양한 품질을 나타내며, 당도와 숙도의 편차가 크기 때문에 과수농가에서는 경험에 의존하여 적정 숙기로 판단되는 배를 수확하고 있다. 그러나 과학적이지 못한 사실에 기초한 수확 관행은 시장유통되는 배에 대하여 소비자들의 신뢰성 저하를 초래하게 되고 소비 감소와 더불어 농가 소득 감소로 이어지게 된다. 최근, 전국의 청과물 산지유통센터에는 근적외선을 이용하여 과일 내부의 당도, 산도, 결함 등을 실시간으로 판정할 수 있는 비파괴 선별기가 보급되고 있으나 이는 수확이후의 선별.규격화 유통을 위한 것이다. 본 연구에서는 이와는 달리, 수확 이전, 즉 재배 단계에서 배의 당도와 숙도를 판정하여 수확적기를 판단할 수 있도록 나무에 매달린 배에 대하여 가시광선과 근적외선 반사스펙트럼을 측정할 수 있고 이를 이용하여 당도와 숙도가 판정가능한 휴대형 센서를 개발하였으며, 개발된 시작기를 이용하여 당도판정의 가능성을 시험하였다. 휴대형 당도판정센서는 광원과 광섬유프로브, 광검출부, 당도판정부, 전원공급부로 구성된다. 광원은 할로겐램프(6V)를 이용하였고, 광섬유프로브는 동심원 형태로서 외부의 광섬유를 통하여 광원에서 시료로 빛이 조사되게 하고, 내부의 광섬유를 통하여 광검출기로 확산반사되는 광이 전달될 수 있도록 하였다. 전원공급부는 휴대와 충전이 가능한 배터리(12V, 2AH)와 이 배터리에서 정전류가 광원으로 보내어 질 수 있도록 제작된 회로로 구성하였다. 당도 판정을 위하여 518nm에서 1046nm의 파장대역에서의 반사스펙트럼을 이용하였고, 레퍼런스로써 백색 테플론 구를 제작하여 사용하였다. 수원 농산물 도매시장에서 판매중인 2002년산 신고 배를 구매하고, 시작기를 이용하여 총 113개의 배에 대한 반사스펙트럼을 측정하였다. 다음으로 굴절당도계로 당도값을 측정하고 반사스펙트림을 이용하여 당도값을 예측하기 위한 부분최소제곱회귀(PLSR)모델을 개발하였다. 여기서 모델의 정밀도는 교차검정법을 이용하여 검증하였다. 시료 표면과 광섬유프로브와의 접촉상태 불균일, 광원의 시간에 따른 경시 변화, 과일 형상의 차이 등에 의하여 측정된 반사스펙트럼은 상당한 변이를 나타내었으므로 이를 보정하기 위하여 반사 스펙트럼은 다분산보정처리하여 이용하였다. 당도 예측용 PLSR모델 개발의 결과, 모델의 결정계수($R^2$)는 0.67, SEC는 $\pm$0.4brix.로 나타났으며, 교차검정에 의한 미지 시료의 예측에서 총 113개의 미지 시료에 대한 결정계수는 0.57, SEP는 $\pm$ 0.46brix.로 나타났으며, 이는 현장에서 충분히 활용가능할 것으로 판단되었다. 금후, 전체 시스템의 부피와 중량을 줄이고 각 부분품들의 전력소모의 최소화할 수 있도록 개선할 계획이다.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.2
• /
• pp.237-246
• /
• 2008

The cross-sections of continuous multi-span beams sometimes suddenly increase, or become stepped, at the interior supports of continuous beams to resist high negative moments. The three-dimensional finite-element program ABAQUS (2006) was used to analytically investigate the inelastic lateral-torsional buckling behavior of stepped beams subjected to pure bending moment and resulted in the development of design equations. The flanges of the smaller cross-section were fixed at 30.48 by 2.54 cm, whereas the width and/or thickness of the flanges of the larger cross-section varied. The web thickness and height of beam was kept at 1.65 cm and 88.9 cm, respectively. The ratios of the flange thickness, flange width, and stepped length of beams are considered analytical parameters. Two groups of 27 cases and 35 cases, respectively, were analyzed for double and single stepped beams. The combined effects of residual stresses and geometrical imperfection on inelastic lateral-torsional buckling of beams are considered. First, the distributions of residual stress of the cross-section is same as shown in Pi, etc (1995), and the initial geometric imperfection of the beam is set by central displacement equal to 0.1% of the unbraced length of beam. The new proposed equations definitely improve current design methods for the inelastic LTB problem and increase efficiency in building and bridge design. The proposed solutions can be easily used to develop new design equation for inelastic LTB resistance of stepped beams subjected to general loading condition such as a concentrated load, a series of concentrated loads or uniformly distributed load.

• The Journal of Korean Academy of Prosthodontics
• /
• v.55 no.4
• /
• pp.410-418
• /
• 2017

Amelogenesis imperfecta characterized as abnormally formed enamel is caused by a defect of unique group of genes. Patients affected by this disease might have difficulties in social and psychological aspects due to non-esthetic teeth as well as functional problems caused by enamel detachment and tooth wear from their early ages. Adult patients with amelogenesis imperfecta can be treated with full-mouth restorations, which make functional and esthetic rehabilitations of severely worn tooth. However, the anterior open bite and lack of occlusal clearance for posterior teeth restorations due to compensatory extrusion are the intervening factors in the prosthetic treatment. Therefore, the determination of anterior tooth lengths, vertical dimension, and anterior guidance should be set carefully. Recently, computer-aided design and computer-aided manufacturing (CAD/CAM) techniques help systematic approaches and enable dentists to reduce time-consuming procedures in the diagnosis and treatment of full-mouth rehabilitation. This case report demonstrates the successful full mouth rehabilitation using a CAD/CAM system in a young adult patient with amelogenesis imperfecta and anterior open bite.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.2
• /
• pp.173-178
• /
• 2018

The direct metal laser sintering (DMLS) technique would be promising for the full-arch implant-supported restorations due to reduced cost and manufacturing time without potential human errors and casting defects. The aims of this case report were to describe the successful outcome of an implant-supported fixed dental prosthesis in the edentulous maxilla by using the DMLS technology and computer-aided design and computer-aided manufacturing (CAD/CAM) monolithic zirconia crowns, and to describe its clinical implications. A healthy 51-year-old Korean woman visited Seoul National University Dental Hospital and she was in need of a rehabilitation of her entire maxilla due to severe tooth mobility. In this case, all maxillary teeth were extracted and an implant-supported fixed dental prosthesis was fabricated that involved a cobalt-chromium (Co-Cr) framework with the DMLS technique and CAD/CAM monolithic zirconia crowns. Six months after delivery, no distinct mechanical and biological complications were detected and the prosthesis exhibited satisfactory esthetics and function. In this case report, with the DMLS system, the three-dimensional printed prosthesis was created without additional manual tooling and thus, reliable accuracy and passive fit were obtained.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.3
• /
• pp.372-380
• /
• 2004

Cleidocranial dysplasia(CCD) is a congenital disorder of skeletal and dental abnormality, which is mesodermal dysfunction influencing many tissues and organs. Skeletal abnormalities in CCD are delayed closure of cranial suture and fontanelle, presence of wormian bone and clavicle aplasia. And CCD has an effect on the long bones, phalanges, spine, pelvis, muscles, and central nervous system. Dental manifestations include retention of deciduous teeth, multiple supernumerary teeth, delayed or absent eruption of permanent teeth and formation of cysts around nonerupted teeth. But as a result in common with a lack of medical and physical disability patient may have no substantive complaint, there are many masticatory and psychological problem by absent eruption of permanent teeth after exfoliation of deciduous teeth. For this reason CCD is necessary fo early diagnosis and must be improvement of the patient's appearance as well as provision of a functioning masticatory mechanism by treatment of surgical removal of supernumerary teeth, followed orthodontically eruption of the natural permanent teeth at adequate time.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.3
• /
• pp.562-570
• /
• 2008

Amelogenesis imperfecta is a group of hereditary defects of enamel, unassociated with any other generalized defects. It is classified into 14 subtypes according to different clinical and genetic features. According to its clinical features, it is classified into hypoplastic type, hypocalcified type and hypomaturation type. However, these features tend to co-exist often. Dental features associated with amelogenesis imperfecta include quantitative and qualitative enamel deficiencies, pulpal calcification, root malformations, abnormal eruption, impaction of permanent teeth, progressive resorption of root and crown, congenital missing teeth and anterior and posterior open bite occlusions. The first case patient is a 16 month-old child with discoloration of deciduous teeth. All of her deciduous and permanent dentition has shown amelogenesis imperfecta. The restorational, orthodontic and recent prosthodontic treatments have been completed. Another patient is a 9 year and 3 month-old child with amelogenesis imperfecta in both deciduous and permanent dentition. The restoration has been done and the prosthodontic treatment is planned after the completion of growth. Above cases indicate that amelogenesis imperfecta occurs both in deciduous and permanent dentition, and it requires the long term treatment and care.