• Animal Systematics, Evolution and Diversity
• /
• v.16 no.1
• /
• pp.39-53
• /
• 2000

The ascidians specimens were collected from Tangsa and its adjacent waters in Korea by scuba divers during the period from 1994 to 1999. They were identified into 30 species which are reported for the first time in Tangsa. Out of them one species, Molgula hozawai, was turned out to be new to the Korean fauna, and six species, such as Eudistoma illotum, Symplegma connectans, Boltenia trasversaria, Microcosmus nultitentaculatus, Pyura squamata and Molgula hozawai, were newly recorded in Chundo Island and Geojedo Island, which are influenced by warm waters of the Kuroshio Current.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.2
• /
• pp.160-168
• /
• 2010

An experimental study has been conducted to investigate the effects of forcing amplitude on the tone-excited non-premixed jet flame of the resonance frequency. Visualization techniques are employed using the laser optic systems, which are RMS tomography, PLIF and PIV system. There are three lift-off histories according to the fuel flow rates and forcing amplitudes; the regime I always has the flame base feature like turbulent flame when the flame lift-off, while the flame easily lift-off in the regime II even if a slight forcing amplitude applied. The other is a transient regime and occurs between the regime I and regime II, which has the flame base like the bunsen flame of partial premixed flame. In the regime I and II, the characteristics of the mixing and velocity profile according to the forcing phase were investigated by the acetone PLIF, PIV system. Particular understanding is focused on the distinction of lift-off history in the regime I and II.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.30 no.2
• /
• pp.225-238
• /
• 1997

Zooplankton distribution in the front zone was investigated in the East Sea of Korea (Sea of Japan). More than 100 taxa appeared in the study area, which was far diverse appearance being compared with those in West (Yellow Sea) and South Sea of Korea. In Nov. 1994, Paracalanus parvus, Oikopleura spp., and Noctiluca scintillans, which preferred warmer environment, predominated at the collection sites in the front zone, especially at warmer surface layer. But in Nov. 1995, when the surface water temperatures were about $2^{\circ}C$ lower than those of the previous year, cold water species of copepod Metridia lucens, immature forms of Calanus and Sagitta, and crustacean eggs dominated in the collection sites in front zone, which were geographically not Identical with those of the previous year. Vertical distributional patterns were not coincide among the taxa. This suggests that zooplankton has different specific habitat characteristics with temperatures. In general, those taxa with preference of warmer environments showed high probability of co-occurrance with low abundances while those that preferring colder environments showed low probability of co-occurrance with high abundances. It seems that warm water contributes to the high diversity of zooplankton in the front zone while cold water does to the high biomass.

• Journal of Nutrition and Health
• /
• v.41 no.5
• /
• pp.428-438
• /
• 2008

Choline is important for normal membrane function, acetylcholine synthesis and methyl group metabolism. In this study, 185 food items customarily eaten by Koreans were selected from the data of the 2001 Korean National Health and Nutrition Survey and analyzed on the total choline content of the foods using enzymatic method of choline oxidase. Foods with high choline concentration (mg/100 g) were listed in sequence of quail egg (476.04 mg), dried squid (452.42 mg), beef liver (427.16 mg), pork liver (424.92 mg), tuna canned in oil (414.44 mg), boiled and dried anchovy (381.30 mg), dried Alaskan pollack (378.88 mg), chicken egg (309.88 mg), chicken liver (259.38 mg), soybean (238.62 mg), French bread with garlic (193.18 mg) and barley (183.73 mg). From this result, it is shown that dried fishes, prepared fishes, livers, eggs, pulses and cereals might be categorized as high choline food. Citron tea and green tea showed low choline content below 1 mg. Vegetables and fruits were also categorized into low choline food. No choline was detected in red pepper powder, beer, soju, soybean oil and corn oil out of foods analyzed in this study. Further study is required for analytic procedure of the foods of which results are inconsistent with USDA's data such as rice and wheat flour.

• Journal of Nutrition and Health
• /
• v.45 no.5
• /
• pp.470-478
• /
• 2012

This study was conducted to investigate dietary factors, bone status, and bone loss in postmenopausal women in rural areas. A total of 189 women participated in the follow-up study after two years. Radius, Tibia, and Phalanx SOS (Speed of Sound) was measured on two occasions 2 years apart by ultra-sonic-metry, and % body fat was measured by bioelectrical impedance analysis at the baseline and after 2years. Dietary intake data were collected 4 times at different season by 24-hour recall method, and then calculated as average. Bone density of radius decreased by 4.2% during the two year period. When the subjects were divided into three groups, by bone decline level during two years, the lowest bone loss group had higher potassium and vegetable intake than other groups. Age and calcium intakes showed significant correlation with bone decline rate at tibia. In multiple regressions, the baseline SOS, vitamin A, vegetables and eggs intakes were found to be significant factors for tibia bone decline. In conclusion, dietary factors, such as higher vegetable intake, seem to affect the changes in bone mineral density in more favorable way. Therefore, efforts are needed to enhance the access to nutritional care for rural elderly postmenopausal women.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.24 no.2
• /
• pp.298-317
• /
• 2019

The physical characteristics of the Ulleung Warm Eddy (UWE) and its relationship with the East Korea Warm Current (EKWC) were analyzed using the CMEMS (Copernicus Marine Environment Monitoring Service) satellite altimetry data and the CTD data of the National Institute of Fisheries Science (NIFS) near the Ulleung Basin from 1993 to 2017. The distribution of the UWEs coupled with EKWC accounts for 81% of the total number of the UWEs. Only 7% of the total eddies are completely separated from the EKWC. The UWE has the characteristics of high temperature and high salinity water inside of it when it is formed from the EKWC. However, when the UWE is wintering, its internal structure changes greatly. In the winter, surface homogeneous layer of $10^{\circ}C$ and 34.2 psu inside of the UWE is produced by vertical convection from sea-surface cooling, and deepened to a maximum depth of approximately 250 m in early spring. In summer, the UWE changes into a structure with a stratified structure in the upper layer within a depth of 100 m and a homogeneous layer made in winter in the lower layer. 62 UWEs were produced for 25 years from 1993 to 2017. on average, 2.5 UWEs were formed annually, and the average life span was 259 days (approximately 8.6 months). The average size of the UWEs is 98 km in the east-west direction and 109 km in the north-south direction. The average size of UWE using satellite altimetric data is estimated to be 1~25 km smaller than that using water temperature cross-sectional data.

• 한국신재생에너지학회:학술대회논문집
• /
• 2010.06a
• /
• pp.106.1-106.1
• /
• 2010

석탄가스화기술은 매장량이 풍부하여 안정적인 공급이 보장되는 석탄을 이용함과 동시에 환경오염물질 감소라는 사회적 요구조건을 충족시키면서 화학제품, 석탄-가스화, 석탄-디젤화, 연료전지, 복합발전 등 다양한 분야에 응용이 가능한 장점이 있다. 특히 석탄가스화복합기술(Intergrated Coal Gasification Combined Cycle, IGCC)은 석탄을 고온, 고압하에서 가스화시켜 일산화탄소(CO), 수소($H_2$)가 주성분인 합성가스를 제조, 정제 후 가스터빈 및 증기터빈을 복합으로 구동하여 전기를 생산하는 친환경 차세대 발전기술로 주목을 받고 있다. 현재 IGCC 기술은 세계적으로 볼 때 상용화단계에 있고, 우리나라의 경우 한국형 IGCC 기술의 확보를 위한 연구사업이 진행중에 있다. 본 연구는 IGCC 발전플랜트의 발전효율을 결정하는 가장 중요한 부분이라 할 수 있는 가스화반응기의 모델링 기술을 개발하는 목적으로 진행되었다. 본 연구에서는 석탄가스화 반응기에서 발생하는 석탄의 휘발화와 Char의 표면반응 그리고 기상에서의 가스화반응등의 현상을 전산유체역학(Computational Fluid Dynamics)을 이용하여 모델링하는 방법론이 연구되었다. 해석을 위한 형상은 해석에 소요되는 시간을 줄이고, 형상이 해석결과에 미치는 영향을 줄이고자 2차원으로 구성하였다. 해석을 위한 수학적모델으로는 난류모델, 가스화반응모델, Lagrangian particle tracking, Char reaction 등을 포함하였고, 해석을 위한 Solver는 Fluent를 이용하였다. 모델링결과에 의해 예측되는 합성가스의 조성을 상용급 IGCC 가스화기의 운전결과와 비교해 본 결과 본 연구에서 설정한 모델로 예측되는 온도 및 가스농도가 실험치와 유사하게 나타남을 알 수 있었고 이를 통하여 본 연구에서 설정한 모델링방법이 적절함을 알 수 있었다.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.21 no.2
• /
• pp.213-223
• /
• 1997

Premixed flame is better than diffusion flame to accomplish a high loading combustion. Since the turbulent characteristics of unburned mixture has a great influence on the flame structure, it is general that many researchers realize a high loading combustion with strengthening turbulent intensity of unburned mixture. Because turbulent premixed flame reacts efficiently on the condition of distributed reaction region, we made high turbulent premixed flame in the doubled impingement field. We investigated turbulent characteristics of unburned mixture with increasing shear force and visualized flames with direct and Schlieren photographs. And the combustion characteristics of flame was elucidated by instantaneous temperature measurement with a thermocouple, by ion currents with a micro electrostatic probe, by radical luminescence intensity and local equivalence ratio. Extremely strong turbulent of small scale is generated by impingement of mixture, and turbulent intensity of unburned mixture increased with the mean velocity. As a result of direct photographs, visible region of flame became longer due to increasing central direction flux. But as strengthed turbulent intensity, visible region of flame turned to shorter and reaction occurred efficiently. As strengthened turbulent intensity of mixture with increasing flux of central direction, maximum fluctuating temperature region moved to radial direction and fluctuation of temperature became lower. The reason is influx of central direction which caused flame zone to move toward radial direction, to maintain flame zone stable and to make flame scale smaller.

• Korean Journal of Plant Taxonomy
• /
• v.38 no.3
• /
• pp.315-332
• /
• 2008

To elucidate the distribution of broad-leaved evergreen plants of the central part of the Yellow Sea, we surveyed 136 islands of Incheon from May 2006 to March 2008. In the present survey, twelve broad-leaved evergreen species were found on 77 islands, which included 28 inhabited and 49 uninhabited islands. Among them, the most popular plants were the following: Euonymus japonicus Thunb., Elaeagnus macrophylla Thunb., Camellia japonica L., and Cyrtomium falcatum (L.f.) C. Presl. These plants were found growing on Baengnyeong Island, the northmost island among those surveyed, near $N 37^{\circ}60^{\prime}$. On the other hand the following four species are found up to Deokjeok-myeon only, near N $N 37^{\circ}10^{\prime}$: Hedera rhombea (Miq.) Bean,, Quercus acuta Thunb. ex Murray for. acuta, Neolitsea sericea (Blume) Koidz., and Trachelospermum asiaticum (Siebold & Zucc.) Nakai. However, these plants are usually found growing in the southern or southwestern coastal region of the Korean Peninsula. Thus the distribution of the broad-leaved evergreen plants growing on these high latitude islands might be influenced by a warm current of the Yellow Sea. The distribution of broad-leaved evergreen plants on each island is described.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.22 no.5
• /
• pp.716-724
• /
• 1998

The objective of this research was to investigate the enhancement of heat transfer by mesh in impinging air jet system. The technique used in this research is to place mesh as a turbulence promoter in front of the impinging plate. The heat transfer characteristics with and without mesh, the effect of clearances between impinging plate and mesh, the effect of distance between nozzle exit and impinging plate, and the effect of nozzle exit velocity have been studied experimentally. When mesh was installed in front of the impinging plate, heat transer has been increased due to the acceleration between rectangular holes and divided small jets. When clearances are changed, heat transfer comes to a maximum under the condition of C = 1 mm, irrespective of nozzle exit velocity or H/B. Also the average heat transfer enhancement with mesh has been increased about 44% under the condition of U = 18 m/s, H/B = 2 and C = 1 mm, compared to the result of a flat plate without mesh. And the results of this research are compared with existing heat transfer augmentation method by rectangular or circular rod.