• Computational Structural Engineering
• /
• v.19 no.1 s.71
• /
• pp.32-38
• /
• 2006

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.16 no.4
• /
• pp.89-98
• /
• 2012

This study estimates the performance of steel spirals according to the compressive strength of the concrete. A total of 24 confined concrete cylinders ($150{\times}300mm$) were cast and tested under monotonic concentric compression. The main test parameters were the yield strength of spiral reinforcements and the compressive strength of the concrete. To effectively evaluate the confinement effect according to the yield strength of steel spirals, the external diameter of steel spirals was designed to be same as the diameter of specimen. The experimental results indicated that the performance of confinement of steel spirals increased as the yield strength of spiral reinforcement increased and the compressive strength of the concrete decreased. Furthermore, existing analytical models were used for predicting the stress versus axial strain relationships of specimens tested in this study. It can be concluded that the accuracy of the analytical models deteriorated as the yield strength of steel spirals and the compressive strength of the concrete increased.

• Journal of the Korean Geotechnical Society
• /
• v.29 no.11
• /
• pp.129-138
• /
• 2013

In this study, Anchor Pile Precast Retaining Wall (APC) with screw shape flange was investigated and the results were arranged for designing APC specifications. Since precast materials require special care when they are manufactured, carried or treated, more accurate design and analysis of optimized dimension are needed : thus moment distribution of front foot was checked. Through full-scale field test, form and optimal stiffening shape were obtained and through fracture test with real load, applicable load was reasonably calculated. Research result in this thesis could be used as guideline or standard of designing and constructing Anchor Pile Precast Retaining Wall with screw shape flange.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.06a
• /
• pp.289-290
• /
• 2012

본 연구에서는 고정식 해양구조물의 지지각으로 사용되는 원형실린더에 나선형 판을 부착하여 와류유기진동에 미치는 영향을 고찰하였다. 연구의 목적을 달성하기 위해 $Re=6.5{\times}10^3$의 균일유입유동에서 2-프레임 그레이레벨 상호상관 PIV기법을 이용한 실험적인 방법을 적용하였다. 모델의 직경은 40mm이며 후류 유동구조, 난류강도, 응력분포에 대한 통계적 유동정보를 계측하였다. 실험결과로는 원형실린더와 뱃전판을 부착한 실린더와의 비교를 통해 뱃전판의 유동특정을 평가하였으며, 뱃전판의 영향은 후류에서 와의 생성과 소멸 메커니즘의 변화에 큰 영향을 미치고 후류 칼만 와열의 안정적인 제어를 통해 와류유기진동을 억제하였다.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1347-1348
• /
• 2006

기존 반도체공정들이 갖는 리소그래피와 식각 등의 공정단계를 배제하는 direct-write 공정을 이용하여 친환경적인 이점을 가질 수 있는 나선형 인덕터의 구조를 제안하고 주파수 특성을 확인하였다. 인덕터의 구조는 Si를 $300{\mu}m$, $SiO_2$를 $3{\mu}m$으로 하였으며, CU 코일의 폭과 선간의 간격은 LAM 공정과 direct-write 공정을 이용할 수 있도록 각각 $100{\mu}m$으로 설정하여 3회 권선하였다. 인덕터는 200-500MHz 범위에서 3.5nH의 인덕턴스, 4GHz에서 최대 29 정도의 품질계수를 가지며, SRF는 2.6GHz로 시뮬레이션 결과를 얻을 수 있었다.

• Economic and Environmental Geology
• /
• v.42 no.6
• /
• pp.549-559
• /
• 2009

The objectives of this study are to investigate the biomineralization of goethite and lepidocrocite formed on the twisted-stalk and the sheathed-filament structure that is suggest microbe origin, and heavy metal in the yellow Fe-hydroxide. On the ratio of Cl and the Cl/Br ratios that are a pollution and non-pollution of groundwaters, it is indicated that the groundwater in this areas were relatively contaminated by human activity. The composition of the yellow Fe-hydroxide consisted mainly of $Fe_2O_3$ and $SiO_2$. The content of $Fe_2O_3$ ranges from 58.57 wt.% to 75.7 3wt.%, and $SiO_2$ content ranges from 5.8 wt.% to 16.17 wt.%. Heavy metal elements such as Zn(max. 6,160 mg/kg), Pb(max. 377 mg/kg), U(max. 503 mg/kg), Cr(max. 203 mg/kg), Cu(max. 77 mg/kg), V(max. 162 mg/kg), Ni(max. 105 mg/kg) were observed to be rich in those yellow Fe-hydroxide. The lath and platy crystals and needle-shaped crystals were clearly observed on the twisted-stalks and sheathed-filaments structure. The goethite, gypsum, and lepidocrocite were identified in the yellow Fe-hydroxide by x-ray powder diffraction.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.9
• /
• pp.961-966
• /
• 2009

In this paper, a novel voltage-controlled oscillator(VCO) using the metamaterial broadside coupled spiral resonators(BC-DSRs) is presented for reducing the phase noise. For reducing of the phase noise, the series spiral structures have been applied for the signal plane and ground plane at each in order to have the large coupling. Compared with the conventional VCO, the proposed VCO has the larger coupling coefficient constant, which makes a higher Q-factor and has reduced the phase noise of the VCO. The proposed VCO has the phase noise of $-121{\sim}-117.16\;dBc$/Hz at 100 kHz in the tuning range, $5.749{\sim}5.853\;GHz$. The figure of merit(FOM) of this VCO is $-198.45{\sim}-194.77\;dBc$/Hz at 100 Hz in the same tuning range, respectively.

• Food Engineering Progress
• /
• v.14 no.2
• /
• pp.85-91
• /
• 2010

In the food process, twist screen is widely used to divide particles on the basis of size. As screen equipped in the twist screen perfoms an important part in the particle size distribution mechanism, the contact area of screen and particles, retention time of particles on the screen, mesh and string thickness of screen and the flow pattern of particles on the screen are major points of the separation efficiency. To improve the separation efficiency, increase the retention time and control the flow pattern of particles, screen frame dam and spiral blockage are installed on the sieve of twist screen ${\emptyset}$ 1200 and ${\emptyset}$ 1500. Twist screen ${\emptyset}$ 1500 with frame dam treated similar separation capacity, 37% higher separation ratio and less non-separated particles of product output 1 than general twist screen. Twist screens with frame dam and spiral blockage showed less treatment capacity, three times higher division ratio and entire separation than general twist screen.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.2
• /
• pp.172-177
• /
• 2004

In this paper, DGS(Defected Ground Structure) is applied to multi-layer structure using LTCC(Low Temperature Co-fired Ceramics). Sprial DGS is adopted in order for size-reduction and higher quality factor, the multi-layer DGS has the same characteristics as the planar DGS. Multi-layer bandpass filter of new shape is confiured using two multi-layer spiral DGS and is designed with no via-hole for the simple process. 5.25 GHz Wireless LAN bandpass filter is designed and fabricated, the insertion loss of the filter is measured less than 1.5 dB, and the size is 2.0 mm${\times}$1.2 mm${\times}$1.1 mm(L${\times}$W${\times}$H).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.224-224
• /
• 2010

야금학적 정련은 태양전지 소재인 실리콘의 저가화를 통한 태양전지의 단가를 낮추는데 유망한 공정이다. 이중에서도 실리콘의 전자빔정련은 고순도의 실리콘 정련에 효과적인 기술이다. 본 연구에서는 전자빔용융법을 이용하여 실리콘 정련을 수행하였으며, 제조된 실리콘의 미세구조 및 분순물농도를 측정하였다. 고진공의 챔버 하부에 수냉동도가니가 위치해있고, 상부에 100 kW출력의 전자총이 설치되었다. 실리콘은 분쇄 및 세척과 같은 전처리 없이 수냉동도가니에 250g 이 장입되었다. 전자빔때턴은 소프트웨어를 통한 헌혈, 나선형의 경로(path)와 원형의 형상(Shape)이 결합하여 원형패턴과 나선형패턴의 형상으로 실리콘에 조사되었다. 전자빔의 출력을 15 kW로 실리콘을 용융하였고 분당 0.5 kW의 속도로 서냉하였다. 제조된 실리콘은 지름 100 mm, 높이 25 mm의 버튼형상이었으며, 횡방향으로 절단하여 미세구조와 불순물거동을 분석하였다. 미세구조는 광학현미경 (OM) 과 전자현미경 (SEM)을 통하여 관찰하였고 불순물거동은 유도결합플라즈마 분광분석기(ICP-AES) 을 통하여 분석하였다. 장입된 실리콘의 초기순도는 99.5 %이고, 전자빔정련 공정 후 99.996 %까지 향상되었다. 전자빔패턴을 이용한 고순도 실리콘의 정련은 태양전지 소재 개발에 유망한 기술로 활용될 것이다.