전산구조공학 (Computational Structural Engineering)

한국전산구조공학회 (Computational Structural Engineering Institute of Korea)
권호 표지

나선형으로 꼬여 만들어진 케이블의 휨거동 모델 I - 케이블의 기하학적 형상과 철사들 사이의 마찰력 -

Bending Model for Helically Wrapped Cables - Geometry of Cable and Normal Forces between Wires -

  • 홍기증 (국민대학교 건설시스템 공학부)
  • 발행 : 2006.03.01
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

키워드

참고문헌

  1. ALCOA (1974). Electrical conductors, Pittsburgh
  2. Cardou, A., and Jolicoeur, C. (1997). 'Mechanical mcxiels of helical strands'. Appl. Mech Rev., 50(1), 1-14 https://doi.org/10.1115/1.3101684
  3. Costello, G. A. (1978). 'Analytical investigation of wire rope'. Appl. Mech. Rev., 31(7), 897-900
  4. Costello, G. A (1997). Theory of Wire Rope, 2nd Ed., Springer, New York
  5. Costello, G. A., and Butson, G. J, (1982). 'Simplified bending theory for wire rope'. J. Eng. Mech Div., 108(2), 219-227
  6. Hong, K-J. (2003). 'Dynamic interaction in cableconnected equipment'. PhD Philosophy dissertation, Univ. of California, Berkeley, Calif
  7. Hong, K-J., Der Kiureghian, A, and Sackman, J, L. (2001). 'Seismic interaction in cable-connected equiprrent items'. J. Eng. Mech., 127(11), 1096-1105 https://doi.org/10.1061/(ASCE)0733-9399(2001)127:11(1096)
  8. Huang, X., and Vinogradov, O. (1993). 'Analysis of dry friction hysteresis in cables under uniform bending'. Proc. of Damping 93, San Francisco, FCA1-FCA 20
  9. Irvine, H. M. (1981). Cable Structures, MlT Press, Cambridge, Mass
  10. Knapp, R. H. (1988). 'Helical wire stresses in bent cables'. J. Offshore Mech Arct. Eng., 110, 55-61 https://doi.org/10.1115/1.3257124
  11. Lanteigne, J, (1985). 'Theoretical estimation of the response of helically armored cables to tension, torsion and bending'. J. Appl. Mech., 52, 423-432 https://doi.org/10.1115/1.3169064
  12. Love, A. E. H. (1944). A treatise on the mathematiml theory of elasticity, Dover, New York
  13. Nutboume, A. W., and Martin, R. R. (1988). Differential geometry applied to curve and surface design, Halsted, New York
  14. Out, J. M M., and von Morgen, B. J. (1997). 'Slippage of helical rein-forcing on a bent cable'. Eng. Struct., 19(6), 507-515 https://doi.org/10.1016/S0141-0296(96)00112-5
  15. Papailiou, K. O. (1995). 'Die seilbiegung mit einer durch die innere seibung, dir zugkraft und die seilkriimmung veranderlichen biegesteifigkeit'. PhD thesis No. 11057, Swiss Federal Institute of Technology (ETH) , Zurich, Switzerland
  16. Papailiou, K. O. (1997). 'On the bending stiffness of transmission line conductors'. IEEE Trans. Power Deliv., 12(4), 1576-1588 https://doi.org/10.1109/61.634178
  17. Raoof, M. (1989). 'Free bending tests on large piral stands'. Proc., Inst Civ. Eng., Part 2: Research and Theory 87, 605-626
  18. Raoof, M., and Hobbs, R. E. (1984). 'The bending of spiral strand and anmured cables close to terminations'. J. Energy Resour. Technol., 106(3), 349-355 https://doi.org/10.1115/1.3231064