• 한국기계가공학회지
• /
• 제14권4호
• /
• pp.8-13
• /
• 2015

In this study, we fabricated and characterized a nanostructured surface based on a plastic injection molding with a local mold heating (LMH) system. A metal mold core with a closed packed nano convex array (CVA) was achieved by integrated engineering procedures: (1) master template fabrication by anodic aluminum oxidation (AAO), (2) nickel electroforming (NE) process, and (3) post-processing by precision machining. The nickel mold core was utilized to replicate a surface with a closed packed nano concave-array (CCA) based on injection molding using cyclic olefin copolymer (COC) as a plastic material. In particular, an LMH system was introduced to enhance transcription quality of the nano structures by delaying solidification of molten polymer near the surface of the mold core.

• 한국정밀공학회지
• /
• 제28권8호
• /
• pp.966-974
• /
• 2011

The use of ion beams in the micro/nano scale is greatly increased by technology development. Especially, focused ion beams (FIBs) have a great potential to fabricate the device in sub micro scale. Nevertheless, FIB has several limitations, surface swelling in low ion dose regime, precipitation of incident ions, and the redeposition effect due to the sputtered atoms. In this research, we demonstrate a way which can be used to fabricate mold structures on a silicon substrate using FIBs. For the purpose of the demonstration, two essential subjects are necessary. One is that focused ion beam diameter as well as shape has to be measured and verified. The other one is that the accurate rotational symmetric model of ion-solid interaction has to be mathematically developed. We apply those two, measured beam diameter and mathematical model, to fabricate optical lenses mold on silicon. The characteristics of silicon mold fabrication will be discussed as well as simulation results.

• Design & Manufacturing
• /
• 제15권3호
• /
• pp.26-31
• /
• 2021

In this study, laser-induced periodic surface structure (LIPSS) was fabricated on Ni, Si, and GaAs samples using a flat-top beam with a uniform energy distribution that was fabricated using a Gaussian femtosecond laser with a mechanical slit and tube lens. Unlike the Gaussian beam, the flat-top beam has a uniform beam profile, therefore the center and the periphery of the fabricated LIPSS have similar line periodicity. In addition, LIPSS was obtained not only in metals but also in metalloids and metals and metalloid compounds by using the narrow pulse width characteristic of a femtosecond laser.

• Design & Manufacturing
• /
• 제1권1호
• /
• pp.51-56
• /
• 2007

As various manufacturing technology of optical glass is developed, the aspheric lenses are supplied to many fields. Electronic or measuring instruments equipped with aspheric lens have recently been used since aspheric lens is more effective than spheric one. However, it is still difficult manufacture glass lens because of high cost and the short life of core. The demands of the aspheric glass lenses increase since it is difficult to obtain the desirable performance in the plastic lens. For the mass production of aspheric lens, specific molds with precisely machined cores should be prepared. In order to obtain competitiveness in the field of industrial manufacturing, a reduction in the development period for the batch machining of products is required. It is essential to analyze the stress distribution and deformations of machining system which is used for manufacturing the aspheric lens using FEM software ANSYS. Finite element simulations have been performed in order to study the influence of machining system which is developed in this study on structures. It is very important to understand the structural behavior of machining system. This paper investigated the static analysis and dynamic analysis of machining system for aspheric lens to predict the damage due to loading.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.125-126
• /
• 2006

The characteristics of the tool system give many effects into the costs and qualities for the finished components. Therefore, a tool life is one of the important issues on cold forging industry. However, since variables related with tool life are many complicated, the studies for solution should be investigated by the systematic research approach. In this study, heat-treatment of tool material is investigated to improve the tool life. Deep cryogenic treatment of tool steel is very efficient to improve the wear resistance due to the fine carbide. And, it is investigated that the shape and dimension of tool give effect into both tool life and quality of forged product.

• Design & Manufacturing
• /
• 제13권1호
• /
• pp.42-47
• /
• 2019

Nucleate boiling heat transfer is one of the most important phenomenon in the various industries. Especially, critical heat flux (CHF) refers to the upper limit of the pool boiling heat transfer region. Therefore, many researchers have found that CHF can be significantly increased by adding very small amounts of nanoparticles. In this study, the CHF and heat transfer coefficient were tested under the pool boiling state using copper and multi wall carbon nanotube nanoparticles. The results showed that two different types of nanoparticles deposited on the surface of two specimens made of the same material increased the heat flux in the nanoparticles with high conductivity, and there was no difference in the critical heat flux when the same material nanoparticles were deposited on the two different specimen surfaces.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.141.2-141.2
• /
• 2016

디스플레이, 센서 등 전자소자는 소형화 단계를 지나 인체 부착형 소자로의 발전을 요구하고 있다. 인체 부착을 위해서는 민감한 피부에 장시간 부착시 무해성과 탈부착의 자유로움이 요구되기에 기존의 화학물질을 활용한 접착 방식에서 개코도마뱀 또는 딱정벌레 발바닥에서 영감을 얻은 자연모사형 건식 접착 방식에 대한 연구가 활발하게 진행되고 있다. 폴리머를 이용하여 자연모사형 마이크로/나노구조 형성은 기계적으로 가공된 금형 몰딩과 후처리를 통한 매우 복잡한 공정이 요구된다. 본 연구에서는 이러한 복잡한 공정을 단순화하기 위해서 폴리머 소재에 플라즈마를 활용한 나노구조를 형성하는 방법을 소개하고자 하며, 건식 접착용 폴리머 소재(PMMA, PDMS)에 따른 표면구조 변화와 표면에너지 변화에 대한 연구를 수행하였다. 플라즈마 표면처리를 위해서 본 연구실에서 자체 개발한 선형이온소스를 활용하였으며 입사에너지, 노출시간, 사용가스에 따른 표면형상 변화를 주사전자현미경을 활용하여 관찰하였다. 또한 처리조건에 따른 표면에너지 변화를 확인하기 위해 물접촉각 변화를 측정하였다. PMMA는 입사에너지, 노출시간이 증가함에 따라 쉽게 나노기둥구조가 형성되었으나, 과도한 입사에너지 또는 노출시간에서는 표면구조가 에칭되면서 무너지는 것이 관찰되었다. 또한 PDMS는 동일한 조건에서 주름구조 형태를 보였으며 노출시간이 증가할수록 주름구조의 간격이 늘어남을 확인하였다. 본 연구 결과를 통해 나노 구조를 쉽게 제어할 수 있는 PMMA가 피부 부착형 접착 패치에 응용이 가능할 것으로 기대된다.

• 한국정밀공학회지
• /
• 제25권3호
• /
• pp.23-31
• /
• 2008

• 대한기계학회논문집A
• /
• 제24권11호
• /
• pp.2749-2761
• /
• 2000

Densification, grain growth, and phase transformation of nanocrystalline ceramic powder were investigated under pressureless sintering, sinter forging, and hot pressing. A constitutive model for densification of nanocrystalline ceramic powder was proposed and implemented into a finite element program (ABAQUS). A grain growth model was also proposed by including the effect of applied stress on grain growth when phase transformation occurs. Finite element results by using the proposed models well predicted densification behavior, deformation, and grain growth of nanocrystalline titania powder during pressureless sintering, sinter forging, and hot pressing. Finite element results by using the proposed model also well predicted experimental data in the literature for densification behavior of nanocrystalline zirconia powder during pressureless sintering and sinter forging.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.363-368
• /
• 2000

Densification, grain growth, and phase transformation of nanocrystalline ceramic powder were investigated under pressureless sintering, sinter forging, and hot pressing. A constitutive model for densification of nanocrystalline ceramic powder was proposed and implemented into a finite element program (ABAQUS). A grain growth model was also proposed by including the effect of applied stress on grain growth when phase transformation occurs. Finite element results by using the proposed models well predicted densification behavior, deformation, and grain growth of nanocrystalline titania powder during pressureless sintering, sinter forging, and hot pressing.