• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.352.1-352.1
• /
• 2016

양자점은 나노미터 크기의 반도체 결정으로 밴드갭에 따라 광학적, 전기적 성질이 달라지는 독특한 성질을 가지는 형광물질으로 활발히 연구되고 있다. 중금속을 기반으로 한 양자점은 높은 발광효율과 광안전성을 가지며, 가시광선 영역에서 빛을 내는 특징을 가지고 있다. 그러나 중금속을 사용하기 때문에 독성이 있어 인체나 환경에 유해하여 응용 연구에 제한적이다. 반면에, 탄소 기반의 양자점은 중금속 기반의 양자점과 비슷한 성질을 가질 뿐만 아니라, 높은 용해도와 낮은 독성으로 인해 생체적합성이 높다는 장점이 있다. 이를 이용하여 발광다이오드(LEDs), 태양전지, 광촉매 뿐만 아니라 바이오이미징, 바이오센서 등 생물학분야에도 응용 될 수 있다. 본 연구에서는 Bottom-up 합성 방법으로 유기전구체를 이용하여 질소를 함유하고 있는 양친매성 탄소 양자점(N-GQDs)을 합성하였다. 합성에 사용한 유기전구체는 기존에 보고된 유기전구체와 다르게 반응 진행 중에도 pH 측정 결과 중성을 나타내며, 반응 온도($225^{\circ}C$)와 유사한 온도에서도 pH 값은 여전히 6.0 이상의 값을 나타냈다. 중성을 띄는 특징으로 인해 추가적인 산제거 과정이나 표면안정화 과정이 필요 없다는 장점을 가지고 있다. 합성된 N-GQDs는 높은 결정성의 원형구조를 가지며, 원자힘현미경(AFM) 분석을 통해 높이가 ~ 1.5 nm 미만으로 3층 이하의 두께로 형성되었음을 확인하였다. 또한, 적외선 분광법(FT-IR) 분석을 통해 O-H기, 방향족 고리의 C = C (또는 C = N)기 및 C-N기가 각각 ~3250, ~1670과 ~1140 cm-1에서 확인할 수 있다. 합성된 양자점을 유기태양전지의 active layer에 소량(2 wt%) 첨가하여 양자점의 광학적, 전기적 성질을 확인하였다. 비교군 유기태양전지보다 N-GQDs가 첨가된 유기태양전지의 외부양자효율(PCE)이 7.3%에서 8.4%로 약 20%가 증가하는 것을 보였다. 이는 양자점이 상대적으로 흡수가 약한 단파장 영역의 빛을 흡수하고 PL을 내어 active layer로 에너지 트랜스퍼 현상이 일어나 전자전달을 원활하게 해 주기 때문이다. 앞으로 본 연구의 가능성과 추가적인 연구를 통해 더 많은 분야에 응용되기를 기대한다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.461-462
• /
• 2008

$BaMgAl_{10}O_{17}$:Mn, $Eu^{2+}$ green phosphors has been synthesized by the solid state reaction. Green phosphors of nano-size were manufactured in short time by shake method. which were easily manufactured respectively general method. Green phosphors of nano size were control additive, size of $ZrO_3$ ball, shake time and weight of ball in toluene. In result that green phosphors were obtained particle size of 140nm~150nm. The characteristics of fired samples were obtained by 365nm and 380nm excitation source under ultraviolet. In result that the highest PL intensity were observed in wavelength of 365nm.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.68-68
• /
• 2010

Electroluminescence (EL) characteristics of green-emission ZnS:Cu,Cl-based ac-type inorganic powder electroluminescent structures were examined by inserting carbon nanotubes (CNTs) into or next to the dielectric layer. For the top-emission type EL structure, where the luminescent light was emitted from the top of the structure, was fabricated by assembling in order, a top electrode, an emitting layer, a dielectric layer, and a bottom electrode from the top. $BaTiO_3$ powder mixed with CNTs was used as a dielectric layer or CNTs were deposited between the bottom electrode and $BaTiO_3$ dielectric layer in order to improve the role of the dielectric layer in the structure. Luminance of an EL structure with CNTs inclusion was greatly enhanced possibly due to the high dielectric constant in the dielectric layer of $BaTiO_3$/CNTs, which is one of hot research topics utilizing nano-objects for intensifying dielectric constant and reducing dielectric loss at the same time. A variation on the CNTs themselves and their inclusion methods in the dielectric layer has been exhorted, and the underlying mechanism for the role of CNTs in the EL structure will be explained in the poster. In order to extend the flexibility of EL devices, EL devices were fabricated on the paper substrate and their performance was compared other EL devices on the plastic-based substrate.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.4
• /
• pp.51-56
• /
• 2019

LuAG:Ce(Lu₃Al₅O₁₂:Ce³⁺) nano phosphor were synthesized by applying the coprecipitation method. It is used to increase the color rendering of phosphor ceramic plate for high power LEDs and laser lighting. Internal quantum efficiency and absorption of LuAG:Ce nano phosphor are 51.5 % and 64.4 %, respectively, which is higher than the previously studied nano phosphors. The maximum absorption wavelength of this phosphor is 450 nm blue light, and the emission wavelength is 510 nm. The emission wavelength shifted to longer wavelength when the concentration of Ce increased in the heat treatment of the reducing atmosphere. Thermal quenching of LuAG nano phosphor was 70 % at 200 ℃, it was explained by their significant quenching of all raman scattering modes, implying the restriction of electron-phonon couplings caused by their defects.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.8
• /
• pp.167-171
• /
• 2014

While the development of a portable plate panel display, thinning, high color reproduction, high brightness studies have been actively performed. LED, OLED is used as a light source. The research on quantum dot is much accomplished by the material of light source. Such quantum dot is the next generation semiconductor nano fluorescent substance because quantum dot has the high color reproduction and flexible display characteristic. In this study, we presented to method of using the quantum dot for implementation of the plate panel display. Quantum Dot (CdSe/ZnS), having a 100um thickness, is spread in PET barrier film. A Blue LED having a wavelength of 455nm as a light source irradiating light to the optical characteristic of the devices produced and evaluated. Also we presented the possibility for application with the color change film of the LCD.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.1
• /
• pp.18-21
• /
• 2017

In this study, spherical monodispersed cerium-doped yttrium aluminum garnet (YAG : $Ce^{3+}$) phosphor particles were synthesized via homogeneous precipitation method using the mixed solution of yttrium nitrate, cerium nitrate, aluminum nitrate, ammonium aluminum sulfate, and urea as a precipitant. During the process of precursors of monodispersed YAG : $Ce^{3+}$, aluminum ions which form spherical aluminum compounds precipitated first and yttrium compounds precipitated onto the surface of the existing spherical aluminum compounds. Drying process using lyophilization could obtain monodispered spherical YAG : $Ce^{3+}$ particles compare to using oven. The thermal calcination process of YAG : $Ce^{3+}$ precursors under the temperature of $1200^{\circ}C$ for 6 h was enough to obtain 400~500 nm sized YAG particles with pure YAG phase.

• Journal of Biomedical Engineering Research
• /
• v.38 no.1
• /
• pp.43-48
• /
• 2017

Chemotherapy, radiation therapy, and surgery are major methods to treat cancer. However, current cancer treatments report severe side effects and high recurrences. Recent studies about engineering nanoparticles as a drug carrier suggest possibilities in terms of specific targeting and spatiotemporal release of drugs. While many nanoparticles demonstrate lower toxicity and better targeting results than free drugs, they still need to improve their performance dramatically in terms of targeting accuracy, immune responses, and non-specific accumulation at organs. One possible way to overcome the challenges is to make precisely controlled nanoparticles with respect to size, shape, surface properties, and mechanical stiffness. Here, we demonstrate $500{\times}200nm$ discoidal polymeric nanoconstructs (DPNs) as a drug delivery carrier. DPNs were prepared by using a top-down fabrication method that we previously reported to control shape as well as size. Moreover, DPNs have multiple payloads, poly lactic-co-glycolic acid (PLGA), polyethylene glycol (PEG), lipid-Rhodamine B dye (RhB) and Salinomycin. In this study, we demonstrated a potential of DPNs as a drug carrier to treat cancer.

• Journal of the Korean Society of Radiology
• /
• v.2 no.3
• /
• pp.11-18
• /
• 2008

In this study, the particle properties and luminescence properties of Gd2O3 nano powder with various Eu content were studied. Gd2O3:Eu nano powder was fabricated using special solvent which mixed the alcohol and the distilled water at specific ratio. This solvent by the solution method showed short fabrication time because solution time of Gd and Eu was reduced. From this experiment with Gd2O3:Eu, the particle properties og nano powder phosphor way analysed using SEM (scanning electron microscope) and EDX(Energy Dispersive X-ray). Also the luminescence properties of nano powder was measured using PL(Photoluminescence) and CL (CathodeLuminescence). The size of powder was 30nm~40nm. The magnitude of powder showed the best peak at 620nm. Among 1,3,5wt% of Eu content, the more Eu content was added in powder, the more photons wre generated. Also it shows luminescence efficiency was improved adding 5% of Eu content.

• Polymer(Korea)
• /
• v.32 no.5
• /
• pp.465-469
• /
• 2008

Hybrid thin films composed of block copolymer(BCP) and $TiO_2$ with various morphologies on the nanoscale were fabricated using self-assembly of block copolymer combined with sol-gel process. The factors governing morphology changes considered in this study are block copolymer composition, selectivity of solvent and the inclusion of an additive. We also investigated the efficiency of photoluminescence for selected films with different morphologies. Micelle or nanowire structure can be derived from the self-assembly of poly (styrene-block-4-vinyl pyridine) (PS-b-P4VP) depending on the relative selectivity of the solvent for the two blocks, and the titanium tetraisopropoxide ($Ti{OCH (CH_3)_2}_4$, TTIP) is coordinated with nitrogen in P4VP block. Addition of a third component 3-pentadecylphenol into the BCP/sol-gel mixture solution induces morphology change as a result of the change of relative volume fraction of the BCP. We confirmed that the efficiency of $TiO_2$ fluorescence changes for films depending on morphologies.

• Journal of Food Hygiene and Safety
• /
• v.35 no.4
• /
• pp.291-303
• /
• 2020

Marine organism-derived toxins have negative effects not only on human health but also in aquaculture, fisheries, and marine ecosystems. However, traditional analytical methods are insufficient in preventing this threat. In this paper, we reviewed new rapid methods of toxin detection, which have been improved by adopting diverse types of nanomaterials and technologies. Moreover, we herein describe the main strategies for toxin detection and their related sensing performance. Notably, to popularize and commercialize these newly developed technologies, simplifying the process of pre-treating real samples real samples is very important. As part of these efforts, numerous studies have reported pretreatment methods based on the antibody-immobilized magnetic nanoparticles, and some cases have applied nanoparticles to enhance the sensing performance by utilizing the intrinsic catalytic activity. Furthermore, some reports have introduced fluorescent nanoparticles, such as quantum dots, to represent the lower detection limits of conventional enzyme-based colorimetric methods and lateral flow assays. Some studies using electrochemical measurements based on aptamer-nanoparticle complexes have also been announced. In addition, as the response to new toxins generated by changes in the marine environment is still lacking, further research on diagnostic and detection is also greatly needed for these kinds of marine toxins and their derivatives.