• Journal of Yeungnam Medical Science
• /
• v.4 no.1
• /
• pp.145-149
• /
• 1987

The technique of radial artery cannulation and its complications are well documented, but serious complications are rare. This is a report of one case of amputation of wrist due to finger necrosis developed from the radial artery cannulation in patient who had craniectomy surgery. This 52-year-old 70kg male underwent subdural hematoma removal surgery. Right radial artery cannulation was carried out percutaneously using 22 gauge Teflon extracath needle after modified Allen's test appeared to be positive. It was intermittently flushed by heparinized solution. His arterial blood pressure was maintained 100/70 - 110/80mmHg and 5 units of banked whole blood and 1 unit of fresh frozen plasma were transfused during 8-hours operation. Cannula was removed on the 9th hour after operation because that was obstructed. On the 12th hour after removal of cannula, his right hand noted to be cool and cyanotic. So, warm towel and hot bag applied continuonsly on the right hand and the right stellate ganglion block was carried out everyday for 4 times. However, on the 10th day after removal of cannula, necrotic change of all fingers of the right hand became worse and skin of fingers were shrunken. Therefore, disarticulation of the right wrist carried out on the 71th day of his hospitalization.

• Journal of Sericultural and Entomological Science
• /
• v.47 no.2
• /
• pp.78-87
• /
• 2005

In this thesis, we took some stalks, flowers, and leaves of the Hypericum ascyron L. which are able to propagate as mass in our wild to extract the dyeing solution, and cotton and silk were dyed using them in many different conditions. Silk was dyed darker than cotton with increasing the pH density. Silk was dyed darkest among Hypericum ascyron if pH was neutral. We found there was not a big difference between silk and cotton in the given condition considering 'Y' values vs. dyeing temperature. However cotton was dyed darker in hypericum ascyron. There was a rapid decreasing of 'Y' values after one to two hours and almost all of dyeing was completed at these times. We found there was a dyeing acceleration at the higher dyeing density and the lower 'Y' value. If the density was low, dyeing attachment was reduced by dyeing ability via the density of liquid in this plants. Silk was affected higher by mordant dyes in this plants. Fe and Cu had no effect on Hypericum ascyron.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.3 no.1
• /
• pp.24-33
• /
• 1999

For performance prediction and diagnostics of gas turbine engines, linear and non-linear gas path analysis are applied. In order to find optimal instrument parameters to detect the physical faults such as (outing, erosion and corrosion, non-linear gas path analysis is used. A typical industrial gas turbine engine, TB5000, is used to study the effect of physical faults on engine performance. Through comparison of RMS error between linear and non-linear gas path analysis, the optimal instrument parameters can be defined. As a result, it is found that the linear GPA has the level of error introduced by the assumption of the linear mode: can be of the same order of magnitude as the fault being soughtwhile the non-linear GPA can be solved the non-linear relationships between dependent and independent parameters using an iterative method such as the Newton-Raphson method with sufficient accuracy.

• International Journal of Highway Engineering
• /
• v.3 no.3 s.9
• /
• pp.111-118
• /
• 2001

Since the advent of turbojet aircraft with their greater weight and high landing speed breaking performance on runway surface has become un critical. Under certain weather conditions(wet weather, winter) hydroplaning or unacceptable loss of traction can occur, resulting in poor braking performance and possible loss of directional control. To address this concern a number of research project me conducted by NASA, FAA, USAF. The various method which was reported the advantage of the increasing the friction and decreasing the hydroplaning effect. A-2 section of inchon international airport was grooved using drying grooving method. In order to evaluate the effectiveness of the dry grooving method the surface was spray with water and measured the fiction factor and the depth of the water using Mu meter and water depth measuring device. The field test results shooed that the fiction factor nos increased and the depth of the water decreased. The dry grooving method illustrated the reduction of hydroplaning and also, no distress on the runway.

• Geotechnical Engineering
• /
• v.14 no.4
• /
• pp.5-16
• /
• 1998

The ground of Taegu area consists mainly of shales with elastic sedimentary rocks. These shales have a nonhomogeneous and anisotropic characteristics. So their physical and mechanical properties are very different due to the angles($\beta$ value) of bedding planes of sedimentary rock. In this study, the physical and mechanical characteristics of shales in Taegu area are studied by performing all kinds of rock test. According to results of test, apparent specific gravity of shale decreases as the $\beta$ value increases. On the contrary, porosity and absorption increase. Elastic wave velocity shorts the highest value at the $90^{\circ}$. And Young's modulus shows the maximum value at the $30^{\circ}$. The uniaxial strength, triaxial strength, cohesion and angle of friction show the minimum value at the $60^{\circ}$respectively.

• Culinary science and hospitality research
• /
• v.22 no.8
• /
• pp.182-191
• /
• 2016

The objective of this study was to asses the quality characteristics of yanggaeng prepared with different ratios of chestnut powder: 0%, 5%, 10%, 15%, and 20%. The moisture content of the control yanggaeng was higher than that of any other chestnut powder added groups. In terms of color, The lightness (L) and yellowness (b) decreased significantly, but redness (a) increased with increasing contents of chestnut powder. The total polyphenol content and DPPH free radical scavenging activities increased as the amount of chestnut powder. Texture profile analysis showed that the hardness, adhesiveness, cohesiveness, and chewiness were higher than the control group. The result of sensory evaluation test and the overall acceptability showed that the taste, color, flavor, chewiness, softness and overall acceptability were the highest in the 10~15% added group while the color and softness were identified no significant different group. Based on these results, it is suggested that yanggaeng with up 10~15% added chestnut powder can be developed as products.

• Journal of the Korean Society of Costume
• /
• v.57 no.1 s.110
• /
• pp.93-104
• /
• 2007

This study is considered about the fabrics culture of Baekje Period by analyzing the fabrics pieces at a inner part of the It-bronze shoes found at the tomb of King Mu-ryeong in 1971 AD. The analysis methods of the fabrics pieces are a photographing of fabrics pieces surface by VMS, Digital camera(Nikon Coolpix 995) and the analysis of samples by SEM, XRD and FT-IR. It is assumed this fabrics pieces are the inner shoes, which consisted of compound woven silk at outward, some of tabby and a hemp at inward and the braids for decoration, of the gilt-bronze shoes. The features are as follows. 1. All of compound woven silk are the warp-faced compound tabby of plain fabrics and the density is various from high to low one. Compound woven silk which is attached the gilt-bronze shoes of the tomb of King Mu-ryeong weaves in high density by a thick thread. The fibers material of compound woven silk prove to be a silk by the analysis of wrap samples by SEM, XRD and FT-IR. 2. Tabby are excavated under the condition which attached on reverse side of compound woven silk. Those ran classify two types. First, the fine weaving by high density of wrap and weft. Second, the loose warp weaving with one warp and some of weft. 3. Hemp is almost ramie by SEM analysis and the density is different. Ramie which supposed to be attached Guem has the very low density. In addition to, Ramie pieces, excavated in condition and weaved finely, proved the conspicuous weaving skill in Baekje period. 4. Various kinds of braid are found and these ones classifies by fiber material and entwining way. Two types out of these are the one of silk thread, decorates the upper, middle parts of compound woven silk shoes and the other of hemp thread, decorates the lower parts.

• Journal of the Korean Society of Costume
• /
• v.66 no.1
• /
• pp.1-12
• /
• 2016

Najang was the central Seori, affiliated to the Ministry of War during the Joseon dynasty. The objective of this study is to research the existing authentic Najang costumes from the late-Joseon dynasty by examining factors, such as the composition of the costume, size, and method of creation, and attempt to replicate it. The Leipzig Grassi Museum in Germany possesses an official uniform of Najang from the late-Joseon dynasty, and we visited the museum in May of 2013 to examine it for the study. Written records, or Uigwe, and other pictorial data from the Joseon Dynastry describe the Najang wearing black or navy clothing with white decoration and pointy hats. The most notable characteristic of the Najang uniform is that it has the cotton cords pattern. The hat has a brass ball attached, which was worn with the ball facing the front in the early Joseon Dynasty, and was worn facing the back in the later years. They usually wore black head cloths (Heuk-geon), but would attach feathers on the black hats (Heuk-rip) for special occasions. The Najang uniform preserved in the Leipsiz Grassi Muesim does not exist in Korea. It is made of cotton. The cotton cord pattern of the uniform of Najang was made using single-ply cords and double-ply cords. The hat worn by Najang is in a form of a cone that becomes narrower towards the top or is in a form with wide and open end. It was made of oiled paper covered with hemp, and two circular metal disks were attatched at the rear.

• Journal of Fashion Business
• /
• v.15 no.2
• /
• pp.12-22
• /
• 2011

The purpose of this study is to evaluate the differences of visual image on variations in the shoulder strap and length of the one piece swimsuit. Nine samples were examined: 3 variations of the shoulder strap and 3 variations of the swimsuit length. Data have been obtained from 90 fashion design majors and analyzed using Factor Analysis, Anova, Scheffe's Test and the MCA method. The results of the study are as follows: 1) The visual image, according to changes in the shoulder strap and length of the one piece swimsuit, was composed of attraction factor and boldness factor. Attraction was the most important factor in the one piece swimsuit. 2) The visual images according to changes in the shoulder strap of the one piece swimsuits are ranked in the order of one shoulder strap, strapless and two shoulder straps. They are shown to be wanted to dress - sophisticated image and untidy - unique image. 3) As the swimsuit gets shorter, it has more wanted to dress - sophisticated image and untidy - unique image. 4) The number of shoulder straps and swimsuit length do interact with each other in attraction factor and boldness factor. In attraction factor, one shoulder strap and high cut of the one piece swimsuit has the most wanted to dress - sophisticated image. However two shoulder straps and low cut of the one piece swimsuit has the most not wanted to dress - countrified image. In boldness factor, one shoulder strap and high cut of the one piece swimsuit has the most untidy - unique image. However two shoulder straps and regular cut of the one piece swimsuit has the most tidy - ordinary image.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.26 no.1
• /
• pp.45-50
• /
• 1990

The basic investigation of the sea eel pots fisheries by questionnarie observation and dimension of the pots by fishing operation were carried out in order to develop for mechanical hauling system with 20~50 gross tonnage fishing boats from June to December, 1988. Number and weight of fish per pot between smaller diameter 11cm and larger 13cm of the pot have no significance so that the drag of the smaller pots can be decreased about 20% than the larger pots. The operating time by two men from opening to closing with screwing lock entrance was slightly faster than that by three men with knotting entrance even though the losses with two kinds of entrances while fishing operation were about the same. It was very reasonable that stone and lead sinker on the main line were substitute for two or three lead core P.P rope to make it smooth surface of the main line for mechanization of the continuous fishing operation.