• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.17-18
• /
• 2017

This study is to provide a evaluation method for the penetration depth of emulsified refined bio diesel(ERBD)applied to a surface of the concrete by using water absorption capability of the concrete. The concrete applied with ERBD was immersed at water for 1 min., 5min., and 10 min. and then was checked the brightness with elapse of time. Test results indicated that there was clear difference between ERBD part and non ERBD part in concrete specimen after measuring the brightness until 120min.

• Tunnel and Underground Space
• /
• v.9 no.2
• /
• pp.158-167
• /
• 1999

There are substantial difficulties in assessing the volume of soill/rock to be excavated and the cost thereof, which is attributable to the subjective and qualitative methods of rock mass classification prevailing at the moment. This paper intends to introduce more objective and quantitative rock mass classification method easily applicable to the excavation of granites in Muakjae, Seoul. As a result of such study it is proven that Schmidt hammer and point load strength tests are fairly reliable and easily applicable to estimate and quantify uniaxial compressive strength of granitic material in Seoul. In an efforts to confirm the granitic rock mass conditions in 12 meters underground, seismic refraction surveys were made on the top of vertical exposures from where underlying rock mass conditions could be directly inspected. Rock mass boundaries determined by seismic refraction methods were found to agree within a 1m variance with visible differences in rock mass conditions in the vertical exposure beneath the test site. Thus it can be concluded that detailed geotechnical mapping on cutting slopes is a most efficient, dependable and cost-effective technique in assessing likely excavation conditions of shallow granitic mass in Seoul.

• Journal of Korean Society of Forest Science
• /
• v.88 no.1
• /
• pp.11-17
• /
• 1999

Morphological variations in leaves and leaf trichomes according to tree age were investigated for the identification of Quercus taxa at the different stages of development. The sizes of leaves from one-year-old seedlings of Q. serrata, Q. dentata, and Q. aliena were the smallest and increased with tree age. Blade length, blade width, petiole length, number of serration, and serration depth war also varied with tree age. Therefore, the examined taxa by the size and form of leaves were hardly identified at juvenile stages. The type, structure, and density of leaf trichomes of each species varied remarkably along with tree age. Three types of trichomes such as small stellate hairs, large stellate hairs, and long single hairs were observed on the abaxial side of leaves of Quercus taxa. In matured trees of Q. serrata both small stellate and long single hairs on leaves were observed. On the other hand large stellate hairs were found in leaves of Q. dentata. There were small stellate hairs in Q. aliens. In Q. mongolica var. crispula, no hair or small stellate hairs were occasionally found. It is possible to identify Q. serrata and Q. dentata by the characteristics of trichome even at two to three year old seedlings, while, it is difficult to tell Q. aliens and Q. mongolica var. crispula of seedlings from other taxa only by those of trichome.

• Journal of the Korean Magnetics Society
• /
• v.23 no.1
• /
• pp.18-25
• /
• 2013

MFL PIG (Magnetic Flux Leakage Pipeline Inspection Gauge) is called the system which detects the defect for underground pipelines by using magnetic flux leakage method in nondestructive testing. This method is very suitable for testing pipelines because pipeline has high magnetic permeability. MFL PIG generates the magnetic fields to the pipe axially oriented, and detect the signal of leakage flux by using hall sensor. However, MFL PIG is hard to detect the axially oriented crack with small size because the magnetic flux leakage is not enough to be occurred. To detect the small size and axially oriented crack, the circumferential MFL (CMFL) PIG is being proposed and it can maximize the leakage flux for the axial crack by performing magnetic fields circumferentially on the pipe. In this paper, CMFL PIG is applied to detect the axially oriented crack with small size and the analysis for the distribution and the amplitude of the leakage flux signal is performed by using three dimensional finite element method. From sensing signals, the method how to determine the shape of axially oriented cracks is proposed and verified with experiment.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.1
• /
• pp.101-106
• /
• 2020

This research is related to a development of the ultrasonic detector for an internal defect detection of various assembly part's welding zone. In this research, measurement S/Ws including system's motion control, S/W ultrasonic transmitter/receiver control, defect judgment standard setting, etc. have been designed for ultrasonic detection, and welding defects sample network, etc. were also designed for comparison between products in good condition and defective products. Through this kind of system, automatic detection function can be performed for the depth and the defect location of the assembly parts welding zone, and the system is able to make a judgment of internal defect detection which is used to be performed by an expert in the past.

• Land and Housing Review
• /
• v.2 no.2
• /
• pp.189-194
• /
• 2011

To reinforce bearing capacity-changed section or different foundation in the same building, empirical or simple tools have been used. To solve this problem, we suggest the analytical solution that can evaluate and reinforce the stability of foundation. To estimate the effect of reinforcement by replacement in different foundation, soil stiffness evaluation method taking into account the influence factor with respect to depth beneath the foundation need to be applied. In this paper, graphs and relevant formulae are suggested to calculate equivalent soil reaction coefficient showing the effect of reinforcement by crushed stone and lean concrete replacement.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.3 s.52
• /
• pp.253-257
• /
• 2005

Assurance of the objectivity and reproducibility is a major key point in wrinkle measurement used for evaluating the degree of skin aging. The measurement of relief is quickly converted to a non-contact method, of which tools or instruments do not come in contact with skin directly, to minimize the artificial effects which influence the shape or depth of the relief. Here, we showed how wrinkle measurement techniques have been changed briefly and compared PRIMOS and replica method in the point of view of measurement principle and features, the former is non-contact fringe projection tool and the latter is contact type of the method.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.1017-1020
• /
• 2008

Carburization at concrete structures is being processed independently or compositively and each unique Carburization will appear depending on the condition of circumstance. Therefore, the depletion rate was being estimated at this research for buildings and civil construction structures of different environments and of more than 10 - 60 years old by calculating the depth of carburization and the density of Alkali. As the results of the test, buildings (interior) had a deeper and a faster carburization than civil construction structures being exposed to open air as closer to the shore. And also, concrete structures being used as an underdrain of sewage were proven to have a deeper carburization than utility-pipe conduits or underground tunnels.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.3
• /
• pp.488-500
• /
• 1987

The improvement of surface roughness of machined cylindrical rods through the plastic polishing process was studied in this paper. The criterion and limits for the plastic polishing process due to the wave motion of the ridge were established with respect to process variables: ridge shape and size, semi-cone die angle as well as friction factor, by the application of the upper-bound approach. The surface roughness of the plastic polished products was measured, and compared with that of the original specimen. Also the depth of the surface deformation layer was tested, and compared those of the theoretical values. Qualitative agreement exists between the experimental plastic polishing loads and theoretical loads. The wave motion of the ridge was mostly occurred within the established limits. The surface roughness of specimens was sufficiently improved through the present process. Also the predicted depth of the surface deformation layer was in good agreement with experimental results.

• The Korean Journal of Pesticide Science
• /
• v.10 no.2
• /
• pp.107-116
• /
• 2006

Korean entomopathogenic nematode strain were evaluated against white grubs, Popillia quadriguttata, Ectinohoplia rufipes and Phyllopertha diversa in laboratory. In addition we examined the efficacy of entomopatogenic nematode, Heterorhabditis sp. KCTC 0991BP strain against white grubs in Seaside Golf Club in Gimpo, Gyeonggii and persistence of entomopatogenic nematode in fairway of Anyang Benest Golf Club in Gunpo, Gyeonggii. In laboratory Heterorhabditis bacteriophora Hamyang strain showed 95% mortality against Popillia quadriguttata. H. bacteriophora Hamyang strain and Heterorhabditis sp. KCTC 0991BP induced 80% mortality against 3rd instar of Ectinohoplia rufipes. However, the letter showed only 60% mortality against Phyllopertha diversa. White grub density was reduced to 39% by the application of Heterorhabditis sp. KCTC 0991BP at the rate of $2.24{\times}10^9$ infective juveniles $ha^{-1}$ compared with control in Seaside Golf Club. Heterorhabditis sp. KCTC 0991BP persisted for two months at $5{\sim}10$ cm soil depth but not persisted at $0{\sim}5$ cm soil depth for the same periods when applied at the rate of $2.47{\times}10^9$ infective juveniles $ha^{-1}$.